How to make a WIFI control car with the new Blynk app step by step
HTML-код
- Опубликовано: 10 июн 2022
- In this video, we will learn how to make a WIFI control car with the new Blynk app and ESP8266 board. In this project, I used two gear motors and the L298N motor driver. Also, a piece of foam board is used for the car chassis. You can use cardboard, rigid foam, or any other suitable material for this project. Then, we can do it easily and low cost.
Create your dream electronic hobby project step by step. SriTu Hobby guides you to that. Stay with us.
How to make a WIFI control car with the new Blynk app step by step
• How to make a WIFI con...
***Names of components.
***step by step.
***Make it easy.
Bluetooth control remote -- bit.ly/3GWcmmD
Subscribe to more videos --- / sritutech_sritu_hobby
Website for more tutorials --- www.srituhobby.com
Android app for more tutorials --- bit.ly/3GWcmmD
Our store with the best prices
========================================
srituhobby.com/shop
========================================
( Source code and circuit diagram )
=================================
Website -- bit.ly/3zN3Q8r
Android app -- bit.ly/3GWcmmD
=================================
Components list (Our store -- SriTu Hobby)
=================================
1.Nodemcu board x 1 -- bit.ly/4460nNI
2.L298N motor driver x 1 -- bit.ly/3AjzY2b
3.Gear motor x 2 -- bit.ly/40u3TQa
4.Robot wheel x 2 -- bit.ly/3N8OPEm
5.Robot caster wheel x 1 -- bit.ly/3W7X0U1
6.Jumper wires -- bit.ly/43V7gSR
7.Foamboard --
8.Li-ion battery x 2 --
9.Battery holder x 1 -- bit.ly/3IdStK4
=================================
Components list (Amazon)
=================================
1.Nodemcu board x 1 -- amzn.to/3hwqG7v
2.L298N motor driver x 1 -- amzn.to/3c6vkYM
3.Gear motor x 2-- amzn.to/2ZrL0AD
4.Robot wheel x 2 -- amzn.to/3bRmZb6
5.Robot caster wheel x 1 -- amzn.to/3svxGbB
6.Jumper wires -- amzn.to/2RjTt4e
7.Foamboard -- amzn.to/2Zz2pr2
8.Li-ion battery x 2 -- amzn.to/35wst9W
9.Battery holder x 1 -- amzn.to/3kd8O3a
=================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.net/sritu_hobby
==========================================
Thanks for watching.
If you learned something in this video,
**Like.
**Share.
**Subscribe.
#SriTu_Hobby #Nodemcu_projects #IOT - Наука
Terimakasih ilmunya semoga membawa berkah pa. Amiin YRA
Very nice bro🥳🥳🥳
Thank you so much 🥰
Your welcome
Your video is so good thanks for help me❤❤
You are welcome 😊
Excellent video sir. Thanks for the tutorial it works perfectly!
can you help me please in my phone wifi name does not appear
Thanks bro
Your welcome
Can you develop it with a camera plus two-way speakers?
Sir can you make river clean robot that can control with blynk app
Sir I have selected the board nodemcu 1.0 12e module and port com 1 but when i am uploading it is showing error
sir i followed the exact steps but the left motor starts running as soon as i plugin the power and the controls doesnt work properly and even speed doesnt vary please help me
SIR CAN YOU GIVE THE URL FOR NODEMCU BOARDS
How to add on line trecker mode
Sir can we run four motors on l298n?
Two motors on one side in parallel connection?
Yes no problem
Hola, en blynk me aparece fuera de linea, que debo hacer?
I have a question. why my motor is not working properly, I can hear the motor vibrate. It looks like it is struggling to move. Thank you.
That's a power issue
@@sritu_hobby Any recommendation about how tto fix it? I tried using powerbank as power source in Esp8266 and 4 Double AA 1.5V battery with my motor driver. But its not working.
Sir, i followed your video but there is delay present around 10 second what is the main reason for that? How can I fix it?
How Does esp826 support the output of 7.4v from the battery? Maximum input voltage for esp826 is 3.3v right?
Brush the voltage is first going to the motor driver and there is a second connect of the motor driver that says 5 volt on it you will see it when you flip the motor driver and that connection is connected to the esp8266 module
Bro one help after all programing and web development of blynk device is showing official pls any help
Bro , my nodemcu connected to my phone but the gear motors are not responding.
hello, this code works with wifi but without internet? on a local network outside the internet ?
It's work with internet
When i operate the joystic the led flashes on node mcu board for backward and left and no motor movement please help me
Please follow the my tutorial steps
I too am facing same issue. How did you resolve it?
In my board it not showing that options
Sir I've entered the correct template id name and auth token in my code in arduino ide but i still keep getting the same specify template id and name error again and again. Please help !!!
Can I use switches also
Yes of course
please make a arduino firetruck with water pump
Ok sure
Allow me to use your coding as a reference, Sir.😁
srituhobby.com
Can we use hw 9v battery
Yes of course
Can I use AA batteries
Yes
Its is not show the option upload and showing like this ---×---
Plz can you make video how to make make car with mother board
Which mother board??
@@sritu_hobby used in rc cars
Yes
its asking for the project name and the template
Its is not show the option upload and showing like this ---×--- please help for my school project
Will this code work on 4 wheels?
You can do it
Its is not show the option upload and showing like this ---×--- please help me
Its is not show the option upload and showing like this ---×--- please send the correct code
Sir.. Our coding success in our system.. But its not uploading in node mcu.. That shows no port like this(...x...) And any other file has to be downloaded ah.. Like node mcu driver..etc..
Install Nodemcu drivers
@@sritu_hobby ok..thank u sir..
Im getting error as Blynk simple no such directory.
have you got any solution
Its show ESP826wifi.h:No such file or directory kindly help for my school project
Please include the ESP8266 library file.
Thank you
Its is not show the option upload and showing like this ---×--- 😢😢😢😢😢😢
Code works with 4 wheels
Ok no problem
bro wifi ssid code antey amiti adhi wifi name aa reply fast ga evu
English???
How to know that whether the car is connected or not
Check your blynk app
Sir make this project using servo motor
It's not possible
I can't load the code, it's broken
srituhobby.com
I installed 4 wheels left to right and it was reversed, what should I do
It does not work
the joystick is no longer free in Russia
It is free in my section
I live in Russia, maybe because of that?@@theochub
@@user-tk9fk2mp1f no if you create account after October then this problem rises
Now we have to buy it.
Can i code from my phone for this car?
Yah, you can use arduino droid app
Hi sir can I talk with you
What's your issue?
@@sritu_hobby bts7960 make me one video.... same like this video
Its not working.. Totally waste of money.. Verymuch disappointed...
Its is not show the option upload and showing like this ---×--- 8:29
All codes are working fine. Please follow the basic tutorials
hi, in arduino ide it says i need blynksimpleesp8266.h file
can you help me
sir i followed the exact steps but the left motor starts running as soon as i plugin the power and the controls doesnt work properly and even speed doesnt vary please help me
Please check your circuit diagram