Это видео недоступно.
Сожалеем об этом.
How to make a WIFI control car | WIFI control car with Nodemcu and Blynk [Step by step]
HTML-код
- Опубликовано: 19 мар 2021
- Hello guys, This video includes how to make a WIFI control car. Also, this WIFI control car project using the Blynk application and the ESP8266 Nodemcu board.
OK enjoy it now.
Short and sweet tutorial.Only from SriTu tech. If you think this video is good, don't forget to like and comment.
How to make a WIFI control car | WIFI control car with Nodemcu and Blynk [Step by step]
• How to make a WIFI con...
WIFI control car
***Names of components.
***step by step.
***With code.
Subscribe to more videos --- / sritutech_sritu_hobby
Website for more tutorial --- www.srituhobby...
Android app for more tutorial --- bit.ly/3GWcmmD
Our store with the best prices
========================================
srituhobby.com...
========================================
( Source code and circuit diagram )
=========================================
bit.ly/3GWcmmD
=========================================
Part's List (Our store -- SriTu Hobby)
==========================================
1.Nodemcu board x 1 -- bit.ly/4460nNI
2.L298N motor driver x 1 -- bit.ly/3AjzY2b
3.Gear motor x 4 -- bit.ly/40u3TQa
4.Robot wheel x 4 -- bit.ly/3N8OPEm
5.Jumper wires -- bit.ly/43V7gSR
6.Foamboard --
7.Li-ion battery x 2 --
8.Battery holder x 1 -- bit.ly/3IdStK4
==========================================
Part's List (Amazon)
==========================================
1.Nodemcu board x 1 -- amzn.to/3hwqG7v
2.L298N motor driver x 1 -- amzn.to/3c6vkYM
3.Gear motor x 4 -- amzn.to/2ZrL0AD
4.Robot wheel x 4 -- amzn.to/3bRmZb6
5.Jumper wires -- amzn.to/2RjTt4e
6.Foamboard -- amzn.to/2Zz2pr2
7.Li-ion battery x 2 -- amzn.to/35wst9W
8.Battery holder x 1 -- amzn.to/3kd8O3a
==========================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.ne...
==========================================
Thanks for watching......................
If you learned something in this video,
**Like.
**Share.
**Subscribe.
What do you think? please comment below.
#SriTu_Tech_Nodemcu #WIFI_car #smart_car
![EST Gee - NEVER NEED (Feat. Selfpaid Savage) [Official Video]](http://i.ytimg.com/vi/f2cRtr52HXI/mqdefault.jpg)
00:27 How to make a WIFI control car with Nodemcu and Blynk
00:59 Learn how to make a WIFI control car with Nodemcu and Blynk
03:05 This video demonstrates how to make a WIFI control car using Nodemcu and Blynk.
04:22 The video demonstrates how to make a WIFI control car using Nodemcu and Blynk.
07:30 Learn how to make a WIFI control car with Nodemcu and Blynk
09:06 Learn how to make a WIFI control car using Nodemcu and Blynk
11:54 Learn how to make a WIFI controlled car using Nodemcu and Blynk
12:49 Learn how to make a WiFi control car using Nodemcu and Blynk
Crafted by Merlin AI.
Could u please send the code for this please?i cant open it in the description
I need code to
Bro, I’ve gotta show this to my teacher tomorrow and I haven’t even started making this.
hello sir It doesn't work if I connect the vin and gnd pins to the power supply, but it works with the cable. Can you help me?
My friend, I want to thank you for your help. Congratulations on the channel.
thank you sritu tech and your team its working😊
Your code has some error which I can't upload in nodemcu the problem is near Include blynk.simple esp8266
Bhai kya problem Aya tha
Kya problem hai bhai
Does it worh with servo for stearing instead bo motor
hello i love your work. Can you make this robot?, can be control manually and automatically
Thanks you very much this video this helpful for me and my teem.
Your welcome
Obrigado, otimo video. Feliz Natal
how much weight can it carry and how much speed will be decreased with increasing weight??
Very nice video sir can you tell me what to do if i change the driver module to L293d? Please it would help a lot
I want to ask if it is possible to add a seed sowing feature (with servo) and a plant waterer (with mini pump watering)
Did it work??
is this based on internet or wifi?
Wifi
It's better to use only two motors so that battery will last longer!!
Great work !!.....can you please make a video on automatic and manual modes of operating of any one of the actuators using NODEMCU.... please
Eres un maestro! Gracias me sirvio y quedo a la primera!!!!
@@sritu_hobby you are a master, I stay at the first try. New subscriber and thank you
Thank you
And with an esp32 cam you can go anywhere!!!!
Can we just replace the before one with an esp32 or modifications should be done?
I ordered a 10x 10 bread board can u tell me where to put thr wires since I'm out of space and I can't get another one please
You going to thank me later, Also Don't forget to install the alignments on the two Front wheels adjusted. You're Welcome!
'Happy Creation' ✌❤👍
Please tell me which is better
Arduino uno or esp8266 nodemcu
Esp8266 is good
É possivel comandar de qualquer rede ou apenas da rede escolhida?
What if i use 7.5 volts instead of 7.4?
It's really amazing
Thank you dude
I'm getting as device offline in blynk app , can you please help with it.
Please check the blynk auth token
@@sritu_hobby yeah i have checked i have given the right one. And tommorow is my last day of submission.
the code is for 1 driver module, 2 motors. if for 2 driver modules, 3 motors what need to be added ?
What if i used esp8266 v3?
Did the cide still working?
Motor on nahi ho rahi hai hotspots ok he or bettery ok he please help me 😮
Bhai moter driver ke badle 4channel relay module use kar sakte hai
how come We want to create a manual and automatic dmart vacuum cleaner where are we gonna pin out sa wheels on the driver module or to gizduino board ?
Do we have to enter phone wifi name from which we are controlling it
Would this work with a nodemcu v3 lolin wifi esp8266 ch340?
please help me..im noob....how about i put ultrasonic and get noti from the signal..and the wheels move ...how em
bro wifi ssid code antey amiti adhi mana wifi name aa
pls bro fast ga reoly pattu
What is the maximum range of this bluetooth??
10m
Hello srithuhobby , in getting error” please specify your blynk teplate id and blynk template name “
same, code is wrong
Hello sir.
Can i change the l298n motor and with two bts7960 for huge motor
Can i used node mvu v3but soldering like you
Battery ko reacharge kese karenge nodemcu se kar skte hai kya
Bro which code we must upload node mcu code or Blynk code plz replay fast
Sir we can't use old blynk app so make an video of new blynk iot app for wifi car
Ok sure.
Thanks man
Sorry to disturb sir ,my whole car is ready but only blynk iot work is remaining
the code link is not working
Can you tell me the name of the green sheet with squares that you have in the background. I want to buy one too but I don't know the name
@@sritu_hobby Thanks
does it work two buttons at a time?
suppose left+forward
No bro
Thank you for video. I have a question. Can we control it from anywhere? For example I m in one city and that car is in any other city. Can i connect to wifi and control car? If yes please explain
Yes of course
No u can't,the range of the wifi is around 20m!!
@SriTu Hobby Tech All the connections are right but when I click on any direction the NodeMCU gets turned Off and again it starts after resetting the NodeMCU.I am using 9v battery and l298 driver. Please Help
9v is not enough
Hello sir i lost the WiFi and program control both plz reply if u can help in correcting it
My esp8266 is cant connect to blynk cloud what im need to do?
I followed your steps but encountered a problem, the device 'WIFI Car' was not detected online in the 'blynk' application. Please tell me how to solve it
Check your wifi details
@@sritu_hobby okay
@@sudbytarmano00did it work?
Bro can we use amptex 12v battery 🔋 and 1000 rpm motor?
12v battery is ok..
@@sritu_hobby nathing will happen to notd mcu?
@@shakthigv8305 5 v is maximum , don't go above it
how to connect wifi module with l293 for the same project
i do everything but my robot car dosen't work ... T-T its have no anything error but when i press on blynk iot its not working .. can u please reply T__T thx sir
It's showing error NO SUCH FILE OR DIRECTORY which library we want to install
How to get authorisation code ?
how can i dowload the attached file?
I have onw doubt
Is it necessary to connect mobile and esp to the same wifi network?
nope
Does it need any wifi network
Bro jab joystick ko y button ko forward y kahin bhi move karty hn to car auto run hona start kardyti h control bhi nehi hoti aur wifi bhi diss connect ho jati h😢😢😢
We can control this car from anywhere in this world right!
Battery ke jagah h koi 9 volt ki how ki use kr skate h
Yes
Hello! This Is a very interesting project... I'd like to make the same with more battery autonomy. I'm thinking about a wireless charger for mobile, but does boards and motors works at 3.7v? And if I'd want to power It from 220v, could I use a 5v 1/2A PSU? Any idea? Thanks
It works from 5v to 12v. You can use a 9v battery for that.
@@sritu_hobby yes, but It will not charge from wireless charging station...
i can use ios?
Yah
Hii sir,
I didn't find the code link can u share the code link with me ?
Hello sir❤
I hope your well.❤
I want to do this project with esp32 instead of esp8266 is it possible?
i am also doing with esp32
Can i do it with esp32
Yah
I'm not able to power up my nodemcu without the usb cable when using 9v battery but it works fine with a usb cable connected to a laptop. How can I resolve this?
it's not possible..
Can i use esp32 insted of 8266 ??
Yes
can we make drone from nodemcu
can i know what kind of li-on batteries i can use , do we need use 3.7v 18650 4800mAh only?
it's good
Please use a 9v battery
I have one issue, i am using 12V 5Ah battery. After running motors for some 30 seconds the driver is turning off automatically, any idea why this is happening.
Please use a 9v battery
@@sritu_hobby Can you give an explanation as to why I need to use a 9v battery when the input voltage can be 12v for the driver?
Sir compline nahi ho raha board mai yahi board lga Jo aapne lagyaa
sir where do i get the authentication?
helo.... where is the program description link, has it been removed?
srituhobby.com
i want to ask, i already follow all the step and the code, but why my wheel is not syncron with the code
Try again
Please explain the way in which we have to connect this car to phone or tab how it will be connected to bľink app to that code?
Have you found the solution yet?
Can we control it from anywhere of the world using internet?
Yes of course.
Good luck
Thank you
I need more detailed tutorial on connecting the Blynk app. The new version of Blynk is very different, I cannot get the token! Blynk wont find my device even
Please check my channel
Bro i don't have battery right now can I use a 12v adapter for testing i will attach a battery later
Ok no problem. Also, you can use a 9v battery
@@sritu_hobby ok thank you
Can I use esp32s 38pins beside of 8266
Yes
On my L298N motor driver ENA and FNR are blocked by something specifically some black things or blocks
Can I do this with rechargeable batteries?
It's ok
I doesn't have pc so what should I do
The app don't have this project
I want the code and circuit diagram
Description
Only node mcu board light blinking tt motor not working
Drone er setup er code hobe vay.....???
How can I fix it if it appear failed connected
where is the code
srituhobby.com
Can we use esp32
Yah of course. But you have to change the code
Can it connect to one dc motors only?
@@sritu_hobby the code need to change or not?
@@sritu_hobby can you explain how to change the code
hello from where we would get auth token????reply pls
Check your mail
I have used 9v battery and everything is dump properly but at the end the car does not move sir please help sir there is Wednesday project demo sir
Check your Blynk auth token
@@sritu_hobbyBlink is connected
Hello you can layout with adafruit motor shield v2 and sonar sensor automátic drive y and manual. Can be good proyect
@@sritu_hobby sorry my english its bad . You can design another car with adafruit shield v2 and sonar sensor. For the car drive automátic and manual conduction
@@sritu_hobby I am wacht your site its good tutorials
Sritu Hobby where is the code???
srituhobby.com
Bro can you make a drone with node mcu wifi modulor
I'll make it
Where I get this auth code I don't recieve any mail from blynk
Check your blynk app sign up email
view first view
@@sritu_hobbyur wlcm
CAN YOU PLEASE HELP ME
I have lag and latency problem when I press forward it does not respond immediately and sometimes when i lift my finger of the button its keeps doing the command for a While please help me i need solution for this because it's a school projet thank you
Don't worry. I'll upload the new blynk app project today.Please wait.
este proyecto se consideraría un sistema embebido??
English???