I followed all the steps, starting from start to finish. Blynk app and Node is online but the LCD, Power Relay and sensor is not active, not even lighting up. I followed the wirings and codes. Please help!
Hi can you help me plz , I tried all the steps and they are all correct, but when I try to control the devices via the phone, it appears offline ? what i do 💔
@@sritu_hobby my jumper wires are plugged in correctly sir, and I've disassemble and then assemble the project in 5 times, but still won't show the text on the lcd display
i have an issue . while uploading the code it gives me template id and temlpate name error plz help me to resolve it i have a project on it and has to present it on next 3 days . thank u.
Why happened WARNING: library LiquidCrystal_I2C claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp8266 architecture(s). Help me!
Hi, Thanks for the vid! Please can u clear that will this command will automatically turn on/off the relay and can we generate a graph of water level w.r.t time in Blynk app?
Error compiling for board generic ESP8266 module help immediately sir
Can you helpme i cannont turn on or off water pump?
How do I set the distance for my tank if it is deeper than the one you used?
hello sir, i use arduino uno r3, gsm sim900a module and ultrasonic. how do i set the code? i use power adapter instead wifi
Que excelente trabajo y gracias por compartir.
Do I need to use the relay ? Is it necessary?
I try, but the breadboard no much space for node mcu esp8266, how i can connect the esp8266
Please use two breadboard together
@@sritu_hobby sir i was try, but why lcd didn't on?
check the jumper wires
@@sritu_hobby what the input of esp8266?
I followed all the steps, starting from start to finish. Blynk app and Node is online but the LCD, Power Relay and sensor is not active, not even lighting up. I followed the wirings and codes. Please help!
please respond ASAP
I really need this to work please
Hua bhai ab@@noriakikakyoin3991
sir I have face the issue at time of uploading the the code.....the error is timeout packet header is missing then what should I do ?
Nice! I finally done it!!
I am getting error of unable to find preferences.txt
Bro how you connected the power supply at the end of the experiment...
same doubt
Are laptop se
Error compiling for board generic ESP8266 module help immediately sir
this is a big problem (Now, select the board and port. After, upload this program to the Nodemcu board) please help me
I have a problem with the led light, the green light until the red light doesn't want to light up?
how to connect arduino uno r3 on blynk? i use power apadter, because there is no wifi on arduino uno r3
Bro can you give all library files in one folder 😃😃
This project same with flood monitoring system? If same, can i follow this step
It's nor possible
Hi can you help me plz , I tried all the steps and they are all correct, but when I try to control the devices via the phone, it appears offline ? what i do 💔
If 5v relay module not being used, is it still running?
The liquidcrystal library you've given is not applicable for esp8266
do u solve this problem?
No
@@apongsor5850 do u connect to hardware? I ask discord in the morning, they said it just a warning, if not mistaken , it can work.. I didnt try yet.
How can I make it not dependent to computer, do I have to powered it up with Li-ion battery?
Its ok
HC-SR04 can't detect water . How do you do that success ?
Awesome project
Did you make the same project with ESP32??
Yes
Please share the link
Hi can i can control through phone from any part of the world i want to know its urgent please reply🙏❤️
awsome project this is what i need for my home WATER Tank monitoring and automate the Pump motor!! thanks for this very informative!!
Sir Compilation error: LiquidCrystal_I2C.h: No such file or directory is the error coming
Me too same can u tell me how to correct it
can be use on river ?
sir what you use the power? i was try, but relay, lcd and sensor not active if i only use usb from my pc
Check your jumper wires
does it make a difference if I used Esp32?
Yes
Thanks for making water tank level indicator I want use float sensor not use ultrasonic sensor please make with float sensor
can u share the full code, i get error for uploading it
sir why my lcd display, he din't show the text? how can i fix this sir?
Check the jumper wires
@@sritu_hobby my jumper wires are plugged in correctly sir, and I've disassemble and then assemble the project in 5 times, but still won't show the text on the lcd display
Hi does this works for every container?
hi sir if i using esp32, need to change code or using the same as your?
Yah of course
Is necessary to connect relay into battery
Awesome… very beautiful 👌
Fully watched 👍👍👍👍
Thank you
Error compiling for board generic ESP8266 module help immediately sir
@@almightypush2251 m too.. can u help??
Bro where are u shipped from esp8266 CN or HK
Please reply
China
@@sritu_hobby can you please give me this project pdf file
What if my water tank is bigger than the video? How can I edit the depth that the sensor can read??
Please reply sir
Error compiling for board generic ESP8266 module help immediately sir
Sir can u make the pcb layout for this project?
Yes
where is it
Where can i get sir@@sritu_hobby
Compiling error need source name n code
Plzz help what should I do
What is the power source used?
USB power
How we want to connect the mobile with the board
we have to turn on wifi or Hotspot in mobil
Pls reply
Hotspot
WIFI
Add kalman filter, Best read stability.
i have an issue . while uploading the code it gives me template id and temlpate name error plz help me to resolve it i have a project on it and has to present it on next 3 days . thank u.
same goes to mine error, how u solve it
sir can we use the same architecture with esp32??
Hi..have you done this project with esp32? Because i also only have esp32...is it still working with esp32?
How can we control the water pump from the tank. I can see the on and off button on the smart phone is not working
how to on & off the water stream???
Excuse me sir, my relay doesn't want to On/Off while i clicked on blynk app mobile. Do you know why it happen? Thanks
Check the jumper wires
sir what to do if i want to add buzzer
muchas gracias me ayudaste a entender una duda que tenia
English???
Error compiling for board generic ESP8266 module help immediately sir
How can i insert the water pump?
Visit our website
i need help guys, what to do if im using esp32?
relay is on without giving on in blynk dashboard what should i do
Follow our steps
where upload the program
good work thank you
Your welcome
there's only a little thing that is not the Notifyline
Error compiling for board generic ESP8266 module help immediately sir
Why happened WARNING: library LiquidCrystal_I2C claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp8266 architecture(s).
Help me!
Same problem bro
If you have solution plz tell me bro
why the lcd error only appears
Bros......i think your lcd......screen is green.....plz take the.....blue display
@@msivakumarmcor823 Bros......i think your lcd......screen is green.....plz take the.....blue display
We are getting error while uploding the code...!!!
*Error compling for board NodeMCU 1.0(ESP -12E module)
Please select the correct board
Hi, Thanks for the vid! Please can u clear that will this command will automatically turn on/off the relay and can we generate a graph of water level w.r.t time in Blynk app?
How much is the total components cost...i mean it took..total cost todo this project
It depends on your location
@@sritu_hobby r u not from hyd...
@@sritu_hobby by the way how much it took for u bro!
i follow all step but doesnt work ....why???
why serial monitor at arduino don't show word and also output?
Change the buderate 9600
Awesome sir can you make tutorial on how did you set up the libraries on your code
Bro how do you connected the power supply
Please check the circuit diagram
We should connect the 230 v AC motor
Connect it to the relay module
@@sritu_hobby bro can we connect the 9v dc battery , for demo is it works
Yah
Thankss a lot sir this is very useful ✨
your welcome
Error compiling for board generic ESP8266 module help immediately sir
Mine shows liquidcrystal_I2C.h: no such file or directory
Include the library file
Bg ada program dasarnya? Saya boleh minta 🥺 pengen buat gitu juga nih bg
English??
She asking for coding program that you use on this project sir
nice job
Thank you
@@sritu_hobby you are welcome
Error compiling for board generic ESP8266 module help immediately sir
How to connect the water pump
Visit our website projects
Can any one tell me how to add a buzzer
We need help in this
Don't try this as sensor doesn't work properly.only sensor is it's drawback
It works nigga.i tested it mahself
Hello how to upload that file?
Watch the video
Where is motor😂
Why it's called VCC?
which board to choose?? in boards section
Esp8266
good but i want on off switch in this project
You can use a push button
Wt is th total cost took to complete this project
I have a doubt ....How to contact you bro ?
Please send your issue using contact us page. It's in the website.
@@sritu_hobby Thanks bro
good
Thank you
Relay not working
What kind of water pump that good to use in the project?
It depends on your requirment
Error compiling for board generic ESP8266 module help immediately sir
Same error sir plzzz help me immediately sir plzzz
hi sir, can you tell me what kind of power supply can be use on that relay module?
i make but show blank lcd
Check the jumper wires
Program upload plz
Bro can you provide codes for motor or pump auto on/off when level very low or High (Full)
Hi i need proper code
After upload program succes, there is no view anything in serial monitor, and status on blynk is offline. What must i do?
I am follow step by step, but i am using wemos d1 board.
Enter your blynk auth token
@@sritu_hobby done, after upload nothing happen, and status still offline
Where is the code link send me
because i was also doing this project to college
srituhobby.com
Code is not working
It didn't work when I tried this
Bro what went wrong?
Hi sirr
music galat ha
Plz
Plz help this is my project
Where do we find the source code?
Link in the description
code sir ?
In the description
How to connect to wifi
please read my tutorial in website
ALL OK BUT LCD NO SHOW
Check your wires or contrast of the LCD
How I can contact you on whatsapp
Where is the code
srituhobby.com
Error compiling for board generic ESP8266 module help immediately sir plzzz
????
Where is the code?
Description