Thanks for your video. I own a DV9600, which has the same drive-unit where also the belt has become slippery and has to be replaced. Your action make it easy for me. Greetings from the Netherlands!
Small update: the belt has been succesfully replaced and the DV9600 is operating fully. Except a small thing: some DVD’s give a ‘NO PLAY’ message and cannot be played. Very sad about it.
@@bertushd Clean the pickup lens with absolute ethanol. If that doesn't fix it, you'll need to replace the pickup. The model version of the pickup is "HOP-1200S" or "HOP-1200W".
@@ジャンクな黒桜 thanks for you reply. The strange thing is that there are some DVD’s which can be played without problems. So, I don’t think that the problem is causes by the optics/mechanics, but by the software. I’ve already contacted Marantz Support and a dutch Marantz forum. So, I hope I get the solution some time. If so I will let it know. 🖖
Hi, in the mean time I've discovered the reason of this 'No Play' problem. It is the mechanics that causes it. First I thought it was a software (dvd-region) issue, but also one of my CD-'s didn't play. So I disassemble the player again and put som lubricant on the moving parts. That helped a lot. Almost al my DVD play now. Except a few. The only problem that is left now is that the cam/slide-cam (eur part-nr 90M13AK054210) is worn out the last 2 teeth. So, the loading isn't going well at the moment. So I have to fux that.
![[PONY-修理]「SA8400/marantz」のベルト交換 [Auto Translation to English]](http://i.ytimg.com/vi/RPnl1q7sRV8/mqdefault.jpg)
家のSA8400を数年ぶりに起動したらトレイが出ず、こちらを拝見して
修理することができました。ありがとうございます！
私のSA8400もトレイ出ずの同じ症状でしたので、動画参考にさせてもらい自分で修理できました。
ホントに助かりました。
ありがとうございました。
こんにちは!
現在も元気に動いてます。
ピックアップの交換を教えいただきSACDが聴けるようになり楽しみが増えました!
今まで自己流で交換してたので次回のピックアップの交換楽しみにしてます!
すぐにディスク読み取りが不能になる事で悪名高い機種でした。キレイな高音の薄味な音ですね。
おかげさまで無事に直すことができました。
また、音楽のある生活に戻れます！
Thanks for your video. I own a DV9600, which has the same drive-unit where also the belt has become slippery and has to be replaced. Your action make it easy for me. Greetings from the Netherlands!
Small update: the belt has been succesfully replaced and the DV9600 is operating fully. Except a small thing: some DVD’s give a ‘NO PLAY’ message and cannot be played. Very sad about it.
@@bertushd
Clean the pickup lens with absolute ethanol. If that doesn't fix it, you'll need to replace the pickup.
The model version of the pickup is "HOP-1200S" or "HOP-1200W".
@@ジャンクな黒桜 thanks for you reply. The strange thing is that there are some DVD’s which can be played without problems. So, I don’t think that the problem is causes by the optics/mechanics, but by the software. I’ve already contacted Marantz Support and a dutch Marantz forum. So, I hope I get the solution some time. If so I will let it know. 🖖
Hi, in the mean time I've discovered the reason of this 'No Play' problem. It is the mechanics that causes it. First I thought it was a software (dvd-region) issue, but also one of my CD-'s didn't play. So I disassemble the player again and put som lubricant on the moving parts. That helped a lot. Almost al my DVD play now. Except a few. The only problem that is left now is that the cam/slide-cam (eur part-nr 90M13AK054210) is worn out the last 2 teeth. So, the loading isn't going well at the moment. So I have to fux that.
こんちゃ！ピックアップ交換動画upお願いします。
いつも拝見しています✌️音質はいいのかな⁉️
細かい音がしっかり再生されて聴いていると楽しいです。CDをメインに聴くならおすすめの１台ですね！
疑問なんですが、トレイの開閉口側からゴムベルト交換できないでしょうかね？ 出来る機種もあるので、もし可能ならギヤを外す必要はないし、スナップピンを無くすこともない気がします。
この機種は歯車を外さないとベルトを通す隙間がないので難しいですね。歯車が割れる覚悟で無理ベルトを通せば出来ると思いますよ。
高級オーディオでも電気メーカーの部品は１０年しか保存していないので部品がなくて困ります。アキュフェーズみたいなオーディオ専門メーカーなら大丈夫なんでしょうけど。
Sacdとはなんぞやを理解できていないので、なぜ定価９００００円なのかもわかりませんが。部品の数は多いよなあ。２００３年というと、ブルーレイがスタートには早いか。今より、Sacdに熱い目が注がれていた時期かな。