I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km , belt speed = 2.5 meter per second, trough angle = 30 , surcharge = 25, material = excavated soil (sand) , lump size less than 150 mm , density =1,550 kg/M3 , belt length = 5 Km (multiple flights ) , Flow = 3500 to 4,000 Mt/Hr , Route inclination= zero inclination, Width = 1,200 mm , considering these inputs , how much electricity will be consumed in electrical motor as Kwh per metric ton (Weight) per Km (distance)
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km length = 5 Km , Flow = 2500 to 3000 Mt/Hr , Route inclination= zero inclination, Width = 1200 mm , trough angle=30 how much electricity will be consumed in electrical motor
thank you sooooo much .. i'm using your video to design a conveyor for my graduation project and i wanted to ask .. how should i know the coefficient of friction ? does it depend on material ? .. and i will be so thankful if u can provide me with a standard sheet .
@@rewanhaggag4395 i'm working on the same idea for my project at Sinai University .. a color based sorting conveyor belt .. can you please tell me the specs of the belt and the motor you used for your project ? .. Thanks in advance.
@@MahmoudAhmed-pv2hg we used a servo motor and we didn't actually focused on the conveyor cuz it was an unnecessary part of our project .. my main project was about a pneumatic gripper which we used as an inspection tool to grip a product running on the conveyor , weight it , then decide if it will drop it right or left according to its weight
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km length = 5 Km , Flow = 2500 to 3000 Mt/Hr , Route inclination= zero inclination, Width = 1200 mm , trough angle=30 how much electricity will be consumed in electrical motor
After put/multiply of coefficient friction (0.5) value are divided by lower value that is (1/2). I think friction value should be added in total weight because friction is decreased of this speed, than why? Ans please.
0.5 seems indeed excessive for idler rollers. I use that value with slider beds, it is pretty typical for steel vs. belt material. Just confirm with belt manufacturer since it depends on belt material and slider bed material. For idler rollers, I use 0.05. It is much higher than the equivalent friction factor in bearings but works well.
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km length = 5 Km , Flow = 2500 to 3000 Mt/Hr , Route inclination= zero inclination, Width = 1200 mm , trough angle=30 how much electricity will be consumed in electrical motor
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km , belt speed = 2.5 meter per second, trough angle = 30 , surcharge = 25, material = excavated soil (sand) , lump size less than 150 mm , density =1,550 kg/M3 , belt length = 5 Km (multiple flights ) , Flow = 3500 to 4,000 Mt/Hr , Route inclination= zero inclination, Width = 1,200 mm , considering these inputs , how much electricity will be consumed in electrical motor as Kwh per metric ton (Weight) per Km (distance)
Excellent presentation Sir, please continue your intellectual teaching
Nice explanation. Keep update about design calculation video like this. Thank you, Sir.
Thank you, EBE! May you be blessed!
Thank you sir for the explanation, i learn a lot from your videos. Please continue all about conveyor calculation.
thanking you first of all, okay i will try my best to keep continue the connection
Nice video bro!
God bless u sir. Got it easily.
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km , belt speed = 2.5 meter per second, trough angle = 30 , surcharge = 25, material = excavated soil (sand) , lump size less than 150 mm , density =1,550 kg/M3 , belt length = 5 Km (multiple flights ) , Flow = 3500 to 4,000 Mt/Hr , Route inclination= zero inclination, Width = 1,200 mm , considering these inputs , how much electricity will be consumed in electrical motor as Kwh per metric ton (Weight) per Km (distance)
Great
Looking for more
Like when the belt is at an angle
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km length = 5 Km , Flow = 2500 to 3000 Mt/Hr , Route inclination= zero inclination, Width = 1200 mm , trough angle=30 how much electricity will be consumed in electrical motor
3.28 and 2.2 what value? from the division of 1 hp / 3300 feet.lbs/min
Would like if the music was turned down. Can barely listen to your voice in the background.
thank you sooooo much ..
i'm using your video to design a conveyor for my graduation project and i wanted to ask .. how should i know the coefficient of friction ? does it depend on material ? .. and i will be so thankful if u can provide me with a standard sheet .
Its standard Dry and 20 to 50 °C it will be 0.5 to 0.6. its a ration between roller mechanism
@@hr5094 thank u so much but it's a little bit late hahah , i'm a lean engineer now thank u :)
@@rewanhaggag4395 i'm working on the same idea for my project at Sinai University .. a color based sorting conveyor belt .. can you please tell me the specs of the belt and the motor you used for your project ? .. Thanks in advance.
@@MahmoudAhmed-pv2hg we used a servo motor and we didn't actually focused on the conveyor cuz it was an unnecessary part of our project .. my main project was about a pneumatic gripper which we used as an inspection tool to grip a product running on the conveyor , weight it , then decide if it will drop it right or left according to its weight
Sir please make a video for bulk material inclined belt conveyor total design
What is belt pull ? Force or Work Newtons or joules
What factors to consider while calculating the starting power for full load capacity. Or breakaway torque
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km length = 5 Km , Flow = 2500 to 3000 Mt/Hr , Route inclination= zero inclination, Width = 1200 mm , trough angle=30 how much electricity will be consumed in electrical motor
GOOD VIDEO, but should give some importance/explanation for units.
Thank you sir, but when we are consider acceleration due to gravity(g)? Power= Force x velocity... Right?
yes
After put/multiply of coefficient friction (0.5) value are divided by lower value that is (1/2). I think friction value should be added in total weight because friction is decreased of this speed, than why? Ans please.
Yes its the same, first we calculate the total weight and multiply with coefficient friction.
@@hr5094 the belt pull should be 567.48 Kg
Great....
Hi sir! I want to ask, how do you determine the value of coefficient of friction? Is it constant 0.5?
Dear,
Yes it is standard 0.5, as we know CEMA (Conveyor Equipment Manufacturer's Association) is also follow the same value for friction coefficient.
0.5 seems indeed excessive for idler rollers. I use that value with slider beds, it is pretty typical for steel vs. belt material. Just confirm with belt manufacturer since it depends on belt material and slider bed material.
For idler rollers, I use 0.05. It is much higher than the equivalent friction factor in bearings but works well.
Its standard Dry and 20 to 50 °C it will be 0.5 to 0.6. its a ration between roller mechanism
Hi Sir how did you calculate linear speed?
Linear speed depend upon how much material traveling per hour is required
its mean that will we use 2.5 hp motor for this conveyor
Kindly reduce the music sound and speak loudly
Suggestions... installation procedure of different coupling types
Installation of belt conveyor guide line
Installation of new belt piece
Is in progress, wait for upcoming videos
Good video but you know the annoying music does not add anything but distraction to your lesson
How do you determine gear ratio?
For gear ratio I will prepair another video regarding reduction ratio selection of motor and gear
density of rubber is 1360 kg per meter cube is it correct?
yes approximate
how to calculate required belt pull?
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km length = 5 Km , Flow = 2500 to 3000 Mt/Hr , Route inclination= zero inclination, Width = 1200 mm , trough angle=30 how much electricity will be consumed in electrical motor
music jaruri tha kya sir G
NICEEE
it isnt weight its mass as weight is mass x gravity
Right. Kinetic force = Normal*kinetic coeficient.
Normal = mass * gravity.
CMIIW
could you get rid of the background music. so annoying I can't hear you
no music Please .its irritating.
Music kya hai. Vo jaruri nahi. Good concept with Very bad presentation.
I appreciate your help in providing me a brief equation or rule of thumb to calculate the specific energy consumption as Kwh/Mt/Km , belt speed = 2.5 meter per second, trough angle = 30 , surcharge = 25, material = excavated soil (sand) , lump size less than 150 mm , density =1,550 kg/M3 , belt length = 5 Km (multiple flights ) , Flow = 3500 to 4,000 Mt/Hr , Route inclination= zero inclination, Width = 1,200 mm , considering these inputs , how much electricity will be consumed in electrical motor as Kwh per metric ton (Weight) per Km (distance)