Thanks for responding to my POTA email. I gave you half the info though. They are on a mag mount on the hood of my truck since I have a fiberglass shell in the back. I did get 80m to Rez at 3860 with chokes on the coax. I added a 15 in. extension to the whip and got it to Rez at 3580 for digital and some cw. Still the bandwidth is small @ about 100kc for 2:1 or less. I will try your stake and short radial method for 40m and report back. Really want to keep things as compact as possible. Thanks for all your information. Bob WB6TIS
Coax length can depend on what antenna you are using. While shorter is usually better, it is recommended by some (including the TennTenna designer) that 50' is the sweet spot for EFHW antennas, as it acts as it's own counterpoise.
Custom built my own 42ah lifepo4 battery with a Daly bms that has Bluetooth so I can watch my usage on my phone, throw out 200 watts of solar power and I can run my Dx-10, tablet plugged in, and a desktop fan without any issues all day even with overcast. Battery is mounted in ammo can, works amazing and love being able to see real time draw and remaining capacity on the battery from my phone.
Great info on Ah required. I built a 50Ah in that smaller gigaparts explorer battery box (after I found a short enough battery lol) with genasun controller and measured consumption Buddipole Powermini2 matches your data. Great videos.
I have a 40 Amp-Hour Battery, and I did 100W CW for hours. It was overkill, but I'm very happy with it. Did a 6 hour solo Field Day/POTA activation and it was great.
The thing about coax and coax loss is that the incoming signal is going to be much weaker than the outgoing signal, so you could lose any incoming signal before the outgoing signal is completely lost. Also part of the coax length is used on the tower itself, and there is a good reason why Hexliax or hardline is used on long coaxial cable runs. :) Obviously for portable use no one would need to make a very long run of coax, but in the end it all depends on whether contacts can be made with a given setup. This is a really great video & lots of great content! 73 KD5YOU
on a long run it is the opposite unless you using something like LMR 400 at like 100 feet of coax it has almost no losss!!! people complain they lose modulation on longer runs with other coax like rg8 or 58
Hi - just jumped on.. buying pieces and planning to get my used IC-7300 with MFJ tuner setup on long wire (running 100w).. 10-160meter and purchased 100ft coax to help it tune vs adding counterpoise. I have no tower or tree, just fence and house.. might try the gutter too :) 73s K90S
interesting. wire mesh from home depot or so . works with long wire antenna either end fed 1/2 wave or random length . just roll it out put some blocks on it. clip to counterpoise on antenna .also I found it helps with noise floor . with battery I say how big can you bring ? leave the lead battery home. I bring a few LiFePO4 ones with me. run laptops charge phone. re charge HT . run led lights . recharge drowne .keep camcorder going. ETC . I make coffee ,RV coffee pot. powerqueen LiFePO4 50Ah is great for IC 7300. what I use. 73's
I keep 100x of cable in my go kit. I know it is unlikely I will need more to use an antenna outside of a shelter, but if I'm lucky I know 50' of cable will be enough. Instead of worrying about which choice, I carry two 50' runs and join them with a double female connector if needed. More importantly, carry a couple of rubber door wedges to prevent the foam from being crushed in doorways. And some bright gaffers tape for trip hazards.
When I first looked at LiFePO batteries I wondered if the 16 Ah I saw was going to be enough for a 100 W SSB activation. It is more than enough! The laptop's battery taps out at about 2.5 hours and the 16 Ah LiFePO still has easily another 2.5 hours and probably more.
Yes. Here’s how you fix the bandwidth on your ham stick. It’s a mod called the DX Commander with an 80m 1/4 wave inverted L😂 I get the entire band without an external tuner. Oh. And it gets you everything else up 2m (or at least 10m which you will have to pick a portion of that giant band)
Any Biker knows the destination is the excuse for the ride, field day is the excuse to get together and play just a little radio. If you have no choice but to have a long run then buying good coax and an amp help say 500 watts should help compensate
They sell what they call Faraday fabric, they are advertising it as a conductive material that shields wifi, cellular and gps. I am assuming the screen reflects wavelengths larger than the mesh size of the material. Anyway that might be more convenient than a window screen to fold up and stow. I wanted to ask this, is it a better idea to put a usb dongle right on the antenna and use usb cable? Is it easier if you want to do a long run to the antenna to use usb repeaters than an amplifier for the coax like the cable tv companies use? I am new to the hobby and I am leaning toward sdr for reception.
If the ham of 60 yrs wants to operate POTA on 80m tune the antenna to the frequency he wants to operate on and stay there he will be the one calling CQ. I use 3.680 on SOTA the best VSWR depends a bit on the ground or mounting position on different summits but is usually ok. Spot my activation on SW3 and call on 3.680 on either SSB or CW, the Chasers have a bit more flexibility with their antennas usually.
POTA is not the priority for 80m. I am part of a EmCom group with people I know in CA and OR. Our schedules are around 3680 after grey line. I would like to start using my POTA go box to start hooking up with them instead of the base just as a POC.
No matter what you do you’re never going to gain a worthwhile bandwidth increase on 80m with a ham stick. Even with a dipole you don’t get a whole lot of bandwidth. I get 4 hours with a 15aH Bioenno and 8 hours with a 30aH doing SSB @100W.
i would be Curious to What Coax You Would run on HF 100ft MAX But Probably 75ish ft is about what i need..I run M&P Ultraflex 10 Sahara For my VHF/UHF @ 65ft But i am getting Redy to start HF & i am just doing my homework so to speak ! I Was Thinking About 213 or ultraflex 7 but i still dono but them 2 are on my short list
I like using 2 -12 AH. Then I know exactly when I'm half way out of battery. I almost never use the 2nd one. but I'm not all that hardcore. most pota contacts (SSB) was like 30. so there ya go. ya comment readers.
Thanks for responding to my POTA email. I gave you half the info though. They are on a mag mount on the hood of my truck since I have a fiberglass shell in the back. I did get 80m to Rez at 3860 with chokes on the coax. I added a 15 in. extension to the whip and got it to Rez at 3580 for digital and some cw. Still the bandwidth is small @ about 100kc for 2:1 or less. I will try your stake and short radial method for 40m and report back. Really want to keep things as compact as possible. Thanks for all your information. Bob WB6TIS
mike from kb9vbr its a mad genius. he was my first ham video i ever watched
Coax length can depend on what antenna you are using. While shorter is usually better, it is recommended by some (including the TennTenna designer) that 50' is the sweet spot for EFHW antennas, as it acts as it's own counterpoise.
I've seen several end fed antennas that had minimum recommended coax lengths. The braid acts as a counterpoise.
Custom built my own 42ah lifepo4 battery with a Daly bms that has Bluetooth so I can watch my usage on my phone, throw out 200 watts of solar power and I can run my Dx-10, tablet plugged in, and a desktop fan without any issues all day even with overcast. Battery is mounted in ammo can, works amazing and love being able to see real time draw and remaining capacity on the battery from my phone.
Oh yeah, that'll do it. I've got a Daly BMS on my 10AH that I built years ago. Don't have all that fancy bluetooth stuff though.
@K8MRD real time readings make all the difference, no guessing on remaining power 😉
Great info on Ah required. I built a 50Ah in that smaller gigaparts explorer battery box (after I found a short enough battery lol) with genasun controller and measured consumption Buddipole Powermini2 matches your data. Great videos.
Thanks for sharing your knowledge, always great content.
PS. 👍on the Armalite style antena in the background lol😂
Ha, yeah that's just a .22LR. Neat for plinking.
hey mike i went from 100ft of RG8X to 90ft of LMR400, I noticed a pretty big differences, less RFI in the shack more power to the end of the coax
Oh for sure, LMR-400 is like 9 billion times better than RG8X.
@@hamradiotube Inconceivable!
I have a 40 Amp-Hour Battery, and I did 100W CW for hours. It was overkill, but I'm very happy with it. Did a 6 hour solo Field Day/POTA activation and it was great.
Better to have it and not need it. I've never ran my 30aH down in the field but it's comforting to know I have the capacity.
It just needs to be long enough to reach your antenna.
you beat me to it lol
Yup
The thing about coax and coax loss is that the incoming signal is going to be much weaker than the outgoing signal, so you could lose any incoming signal before the outgoing signal is completely lost. Also part of the coax length is used on the tower itself, and there is a good reason why Hexliax or hardline is used on long coaxial cable runs. :) Obviously for portable use no one would need to make a very long run of coax, but in the end it all depends on whether contacts can be made with a given setup. This is a really great video & lots of great content! 73 KD5YOU
on a long run it is the opposite unless you using something like LMR 400 at like 100 feet of coax it has almost no losss!!! people complain they lose modulation on longer runs with other coax like rg8 or 58
Hi - just jumped on.. buying pieces and planning to get my used IC-7300 with MFJ tuner setup on long wire (running 100w).. 10-160meter and purchased 100ft coax to help it tune vs adding counterpoise. I have no tower or tree, just fence and house.. might try the gutter too :) 73s K90S
Great video Mike, you look very happy these days! 73s Don
I use my 7300 for POTA and I have great luck with a 15ah. I have 2 but I've never run one all the way down in my activations
interesting. wire mesh from home depot or so . works with long wire antenna either end fed 1/2 wave or random length . just roll it out put some blocks on it. clip to counterpoise on antenna .also I found it helps with noise floor . with battery I say how big can you bring ? leave the lead battery home. I bring a few LiFePO4 ones with me. run laptops charge phone. re charge HT . run led lights . recharge drowne .keep camcorder going. ETC . I make coffee ,RV coffee pot. powerqueen LiFePO4 50Ah is great for IC 7300. what I use. 73's
I keep 100x of cable in my go kit. I know it is unlikely I will need more to use an antenna outside of a shelter, but if I'm lucky I know 50' of cable will be enough. Instead of worrying about which choice, I carry two 50' runs and join them with a double female connector if needed. More importantly, carry a couple of rubber door wedges to prevent the foam from being crushed in doorways. And some bright gaffers tape for trip hazards.
Metal screen is the Hot Girl Summer counterpoise of 2023.
haha!
At some point, 250 ft or greater, you might want to look at 600ohm balanced feeders as an alternative to coax.
2 hamsticks for same band as radiating elements can increase band width
I tried chicken wire and construction cloth and when it starts to rust you can hear it corroding when the ground is moist.
When I first looked at LiFePO batteries I wondered if the 16 Ah I saw was going to be enough for a 100 W SSB activation.
It is more than enough! The laptop's battery taps out at about 2.5 hours and the 16 Ah LiFePO still has easily another 2.5 hours and probably more.
Yes. Here’s how you fix the bandwidth on your ham stick. It’s a mod called the DX Commander with an 80m 1/4 wave inverted L😂 I get the entire band without an external tuner. Oh. And it gets you everything else up 2m (or at least 10m which you will have to pick a portion of that giant band)
Sounds tricky to mount on your car.
@@TonyYarusso yes! That would be tough! 😂 I have seen some guys set them up on drive over masts. But definitely not a mobile situation.
Any Biker knows the destination is the excuse for the ride, field day is the excuse to get together and play just a little radio. If you have no choice but to have a long run then buying good coax and an amp help say 500 watts should help compensate
Bioenno has a nifty handy dandy chart on their website to give you a basic idea of the load vs time for their batteries. I went with the 20 amp hr.
Awesome t-shirt Mike!
Baby-Ruth!
More counterpoise! Is that like more radials (in number) on a DX Commander antenna? Similar yes, but not exactly the same.
The better the ground plane the higher the Q. The only way to increase band width is to add loss some way but that isn't a good idea.
Looking to use a
Ground the ecm on the cummins ecm unit
I have a G5RV full size, how long does the coax have to be? is there a minimum or maximum suggested? should I use a Balun? many Thanks
They sell what they call Faraday fabric, they are advertising it as a conductive material that shields wifi, cellular and gps. I am assuming the screen reflects wavelengths larger than the mesh size of the material. Anyway that might be more convenient than a window screen to fold up and stow.
I wanted to ask this, is it a better idea to put a usb dongle right on the antenna and use usb cable? Is it easier if you want to do a long run to the antenna to use usb repeaters than an amplifier for the coax like the cable tv companies use? I am new to the hobby and I am leaning toward sdr for reception.
if you need a counterpoise for a mobile, connect a 25 foot extension cord and let it dangle it out of the trunk going down the road 👍
If the ham of 60 yrs wants to operate POTA on 80m tune the antenna to the frequency he wants to operate on and stay there he will be the one calling CQ. I use 3.680 on SOTA the best VSWR depends a bit on the ground or mounting position on different summits but is usually ok. Spot my activation on SW3 and call on 3.680 on either SSB or CW, the Chasers have a bit more flexibility with their antennas usually.
POTA is not the priority for 80m. I am part of a EmCom group with people I know in CA and OR. Our schedules are around 3680 after grey line. I would like to start using my POTA go box to start hooking up with them instead of the base just as a POC.
No matter what you do you’re never going to gain a worthwhile bandwidth increase on 80m with a ham stick. Even with a dipole you don’t get a whole lot of bandwidth. I get 4 hours with a 15aH Bioenno and 8 hours with a 30aH doing SSB @100W.
Taking it to extreme again! Why not give a practical run, maybe 200 ft.
That wasn't the question.
i would be Curious to What Coax You Would run on HF 100ft MAX But Probably 75ish ft is about what i need..I run M&P Ultraflex 10 Sahara For my VHF/UHF @ 65ft But i am getting Redy to start HF & i am just doing my homework so to speak ! I Was Thinking About 213 or ultraflex 7 but i still dono but them 2 are on my short list
i saw your video about the GPS dongle i cant get that one in the UK
Really? At all? That sucks.
That's what she said.
Ahhhh, the age old question…. 😂 How long is too long….
I love the goonies shirt
Hey you guys!!!!
So what I've learned today...is I can run a kW a mile up a to a tower on top a mountain and still have 900 watts to spare lol
I like using 2 -12 AH. Then I know exactly when I'm half way out of battery. I almost never use the 2nd one. but I'm not all that hardcore. most pota contacts (SSB) was like 30. so there ya go. ya comment readers.
I also like two smaller batteries because one can be charging while the other is in use.
should one coil the extra coax or “snake” it?
It really doesn't make any bit of difference, though you would gain the added benefit of creating somewhat of a choke if you coil it.
Don't forget you also lose recieve strength the longer your cable run. Keep everything as short as possible.
no you don't
ABR Industries checkout said code expired.
You may want to give them a call. They will honor it.
@@hamradiotube Thanks, will do. Enjoy your channel.
Will counterpoises help if it’s a mag mount on my car?
I can't see it not helping though I've never tried counterpoise on the car.
@@hamradiotube how would you connect the counterpoise with a mag mount. String them out under the mag mount?
too long coax less modulation!!!unless rg213 0r LMR400