How To Make 3D Printed Bench Drill. DIY Bench Drill. (Prototype)
HTML-код
- Опубликовано: 9 май 2023
- Bench drill making, suitable for drill bits from 0.3mm to 3.5mm. A powerful benchtop drill for wood and electronic PCB boards up to 4cm thick.
Necessary materials:
9V 5A Power Supply: s.click.aliexpress.com/e/_DDW...
PWM DC Motor Speed Control: s.click.aliexpress.com/e/_DEI...
DC 540 motor (9V): s.click.aliexpress.com/e/_Dlt...
Mini Drill Chuck (3.17mm) : s.click.aliexpress.com/e/_Dlr...
Rocker button: s.click.aliexpress.com/e/_Ddg...
16AWG Silicone Cable: s.click.aliexpress.com/e/_Dmf...
Screws (M2.2-2.3) : s.click.aliexpress.com/e/_DEv...
M3 screws : s.click.aliexpress.com/e/_DCB...
Spring (L:35mm, Wire:0.5mm, Diameter: 6mm) : s.click.aliexpress.com/e/_Dlq...
10x15x4 ball bearing (2 qty): s.click.aliexpress.com/e/_Dmm...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
3D Printer STL Files: drive.google.com/file/d/1iRG8...
Link for details: www.rcpano.net/2023/05/10/how...
Thank you for watching. Please Remember to Share, Share and Subscribe for More Amazing Videos.
KendinYap Channel: / @kendin-yap
All of my videos : / kendinyap-video
#diytools
#benchdrill - Хобби
Awesome. Thank you!
Nice job. We shared this video on our homemade tools forum this week 😎
Great project
Thanks for sharing
Great video. Love from Vietnam !
Hocam yine faydalı bir video. Teşekkürler.
Very cool! Is it just me that when you touch the tip of the drill bit to the material, the main vertical shaft of the drill flexes (moves horizontally) a little bit?
Was waiting for this project for a long time. Next project idea: DIY lathe
Good idea❤
Cool build but it looks _extremely_ flexy and imprecise.
Hence prototype
Good job
vvery nice machine
Hocam ellerine sağlık faydalı bir video
I always watch your videos
Thank you
verry verry nice for precision rc model
Mükemmel
İyi mekanizma, ama maalesef ters tepkiyi görüyorum :)
Nasıl yani?
👍👏
Nice
👍👍👍
Çok güzel oldu Elinie sağlık.
Bu arada fon müziği Khruangbin topluluğuna benzettim.
Büyük ihtimalle değildir ama olsa bu çalışmalara yakışırdı diye düşündüm.
Teşekkürler.
Maalesef çok kararlı değil minik de olsa bir kayma görüyorum
There must be sprint for motor to go up without moving by hand so you can use both hands while drill is holding above the pcb itself
You need a dedicated surface radio, air radio has non returning throttle stick which causes pronmblem driving cars
Hocam bir sonraki uçak bölümünde F-14 Tomcat i inceleme şansınız var mı acaba ? Çok hoş bir model sizinde seveceğinizi düşünüyorum 🙏🏼
Сверло заметно уводит в сторону, над станком еще работать и работать. А так идея не новая.
Hello, the owner of this channel, do you have a DIY helicopter in the next issue?
Please make a Quadcopter that use DJI Naza m lite with your 2.3km transmitter ... Please
Üstad emeğine sağlık. Başarılı bir çalışma olmuş. Delme sırasında matkap ucu hafif sağa sola oynuyormu videoda biraz öyle gözüküyor.
Teşekkürler. Minik düzeyde var. Çok hassas olmayan işler için makul kabul edilebilir. Ama bu prototip seviyesinde bir matkap daha geliştirilmesi mümkün tabi. Belki ileride daha rigit bir yapı için uğraşırım.
Does the bit sleeps after touching the surface by 1 mm🤔.....its visible in video
How to make a drone
16 km yapmak için lora modülü nasıl kullanılır mesafe radyo denetleyicisi 🤔🤔🤔
Abi tam aradığım video eline sağlık bide projelerini hangi CAD CAM programını kullanıyosunuz
Onshape
Hocam elinize sağlık. Bunun orjinalinde olduğu gibi viteslisini yapabilirsen süper olur valla. Hem torku da daha yüksek olur.
El sagligi yer-hawa sistemlardan baslanir...
@@almag7764 sorry, I can not understand your speech
The missing piece is what you see at 5:20
Hi. Do you use horizontal expansion for print the pieces? what value do you use for that?
No I do not use.
Hi hi
Merhaba hocam. Sanırım bunu okumayacaksınız ama yine de şansımı deneyeceğim. Yaptığınız rc uçak videolarında kullandığınız uzaktan kumanda ekibini nereden temin edebilirim?
İsimleri ile aratıp farklı alternatifler de bulabilirisiniz. Örnek link.. www.promodelhobby.com/kategori/flysky-kumanda-setleri
Abi uçak videosu gelecek mi
Hocam bu proje için toplam ne kadar filament harcadınız
Hesaplamadım ama geliştirme safhasında deneme baskıları yüzünden çok fazla çöp oluyor. Final hali için yaklaşık 380-400gr filament gerekli.
What is total weight of used filament in 3d prenter for this design?
about 300-350gr
Hi this video is great, which software I should download for design?
I usually use Onshape. Sometimes Fusion360. But this preference varies from person to person. There is a lot of software. You should try many of them and decide what works best for you.
Why, why, Im not so clever! Its not fair!
The rod to lower the drill is missing
I checked. It's not missing. The filename of that part is ... "Bench Drill - Arm.stl"
Merhabalar size nerden ulaşabilirim acaba bir iş teklifim olucaktı ama mail adresinizi hakkında kısmında bulamadım
Teşekkürler. Ben sadece hobi amaçlı uğraşıyorum.
A piece is missing in the files to be printed
Which piece? Can you describe?
How can I buy it
may I get the 3D file?
thank you..
All links are below the video.
Please Click "more" or "show more"
Hello bro, can you love that vice file to me? I want to print it in 3D Print
All links are below the video.
Click "more" or "show more"
How can I get this accessories ?
All links are below the video.
Click "more" or "show more"
I order
ok i'm sorry
鑽糟孔可能掙好多
make it RIGID:. you bacicly.. DELETE whole O-ring by dumping that drill on pcb.. geez buddy details..-
Moaning about details with a comment that barely makes any sense is pretty funny.
@@davidf2281 how baut stick a dril inside your eye socket that will be funny to :)) dont forget to share with us.. we all want mashinist fail:)
@@nin1ten1do Get some help buddy
How to make a drone