Tests like this are what sets this channel a part from the others. Pitting two top shelf (for most guys) heads against each other and letting the cards fall where they may. No sponsors getting in the way, just an honest flow of information from Richard to the world. Thank you.
I have a Superflow flow bench with the wet option that uses fluorescent dyed liquid that shows flow direction coming out of the intake valve into the combustion chamber. Many two valve closed chamber heads have swirl flow (hemi heads have tumble flow unless the intake port is asymetrical). At different valve openings the swirl pattern can move around in the combustion chamber. If the swirl pattern moves over the spark plug it can cool the spark plug and change or clench the combustion rate. Also the ingnition spark intensity is dependent on the temperature of the sparkplug because electron transport needed to generate a spark is temperture dependent and related to the Edison Effect (see WIKI - Thermonic Emission). The wet flow bench can give an idea where that's possibly occurring. The intake port contour directly before the intake valve is extremely critical. This is why two different heads with identical airflow numbers can have completly different performance.
I think this is it. You have to remember that Gasoline kind of burns/expands like shit and extracting the most work out of it is highly dependent on a lot of factors.
So were talking about a 2% increase (approx). Maybe valve spacing , or subtile differences in the cnc work . The AFR heads are obviously moving more air at higher RPM. But again, barely 2% difference. And that is about the difference in intake port volume. So, math and stuff.....
From what I've read, Tony Mamo was the lead head specialist at AFR, and his manual porting designs of their cast heads made it into these castings. So effectively the AFRs are cast versions of Tony's manual porting techniques. When Tony left to create his own company, Mamo Motorsports, he's spent a lot of time porting the TFS260s also. From forum posts, it appears he sells more ported TFS. IIRC, his ported TFS have better CoD than off the shelf AFR.
Hello Richard… great video. Im glad that you used a more less stock LS3 for the testing. Shows more real world results for the average person that doesn’t have a monster cubed engine. I’m guessing it’s minor differences in combustion chamber shape design, plus the minor differences in port volume between the heads explains why the AFR shines.
I would check the short side radius on the intake side of both heads. I suspect the AFR's are probably a little straighter (less of a curve). If that's not the case, I'd then look at the 'pinch point' where the boss for the intake valve goes through the port. Might be slightly smaller on the Trick Flow.
My thought is that if everything else is the same, the AFR with the slightly more port volume made slightly more power. That was the only difference between the heads.
Love how any time I think of a comparison or want to learn something, Richard already has a video out on it haha great guy, keep up the great work and one day I’ll have my motor built
LS3's are over valved relative to their bore size, not that its bad. That is why porting them and not killing torque below 4k rpm is tricky. So I would say the difference is really due to where the engine is making power, relative to each heads runner size. It's just able to pull better on the AFR and achieve higher port energy with it. The TFS may catch up or surpass with more displacement, compression, or rpm if it were made available, but port energy, average port speeds, cannot be discounted or ignored.
AFR did their homework. A couple years ago the talk was about wet flow (maybe from edelbrock). Maybe AFR did a little more work with wet flow in mind. Or maybe that 69cc is actually 66. Maybe the port length is a little shorter moving the powerband up just the little bit to carry torque and hp higher.
While the flow bench numbers may be nearly the same the port shapes (intake and exhaust) on the AFR heads may be working better with the intake and exhaust manifolds. It certainly appears they are flowing more air at higher RPM with the only difference being tested on an engine with intake and exhaust systems.
I read an article years ago about AFR heads and there's more to heads than just air flow. AFR heads also tries to maximize air flow while maintaining a good balance of air flow speed and turbulence to better mix the air and fuel. That works great for carburetor engines, but I don't know about fuel injection. I can understand it working the same way if the fuel has to go in through the intake valve, but direct injection has the fuel injection straight into the cylinder and the heads only flow air. With your history and knowledge does that make sense from the testing you have done.
I'd like to know what valves and hardware the heads both have. That modest power difference could perhaps be explained If the valve/retainer package on the AFR heads is a fair bit lighter than the parts on the TFS heads. Theoretically, any work put into compressing the valvesprings should be given back to the cam when the springs expand again on the closing ramp. This would be totally correct except for the bit of heating effect on the spring when compressed/strained - and also the inertial forces of the valve trying to hang open (newtons first law). The differences are small, but again, if the AFR valve package is notably lighter, I think it could explain what we're seeing here. It jives the effect only becomes notable at higher RPM.
Since both heads have very similar measurable flow numbers the difference in power has to be related to port swirl and atomization. Both heads have the same chamber cc but are there any differences in shape to alter the flame front? 🤔🤔🤔
Ok, im 1.15min in to this & you have asked a question. 🤔 is it retorical... nar. Assuming all the info you have given us is correct & they for most part in the features you have identefied. I'm going with (valve) trumpet maybe seat cut, something valve 🤷♂️
Richard, do you have any comparable data or anecdotal information how the AFR and TFS heads compare to stock heads that have been CNC Ported? For example the TSP CNC porting on LS3 heads.
There are many reasons one could think of. Most are already stated here. Shrouding if the valve has been move to solve this. Spring rates, better valve to cam geometry, Cam spec'd for the head/combo, better exhaust alignment. Flow is not everything. Port design/alignment to it's counterpart makes the best combo. The day and time you ran the dyno? Was the atmospheric pressure the same. Water grains and so on. Push rod length to the exact will give a little. Shit the list goes on. But for the $$$'s spent on heads the stock ones sent to Texas speed would be my pick.
Thank you for another informative video. You know what I want to see... how much power can you make with the crate or junkyard 360 magnum, stock heads and a turbo! turbo magnum! turbo magnum! turbo magnum!
I wonder if it has something to do with one these heads Possibly having a swirl ramp? I don't know much about LS3 heads but I know 5.3 heads have a swirl ramp
Johnprince got it. Moving the valves closer to center for more valve relief. Saw this on a head porting chanel. ls3's like valve relief! Looks like you used the stock intake for low rpm. Is the valve pic showing the afr head intake valve moved over the centerline between the two valves?
Which way does the 2-3 cfm flow difference go between the AFR & TFS? Is it always in favor of the AFR? A 2-3 cfm difference at low lifts (and therefore flow rates) can help significantly. But anyway, for a stock displacement LS3, aftermarket heads are not a good value in terms of Dollar per HP. 40 HP (max) gained per $2600 for a set of heads. That's $65/hp. The best value is to spend $5-600 on a cam and springs, and you get 50-70 HP.
did you try swapping the valves? touch up the valve jobs valve job analysis valve analysis stem coatings. finish, materiel, shape? TI option Inconel option common sizes chamber analysis' any differences in guide materiel, seat materiel? (like for HD) velocities? which? blower I've wondered why not a canted valve head with a semi rotated chamber cheers
Was the valve spring package the same? The AFR may have been slightly better at controlling valves (bounce at the seat). Maybe it had lighter valves and retainers or a little more appropriate spring for the combination.
@@cedricwilson2055 Where do I say float? i didn't say valve float, I said bounce. Clearly the spring wasn't in full float but a proper spring/valve comb is worth power on a like for like situation.
I would honestly like to see the differences of a ported head and cam on the ford fiesta's 1.6 ecoboost, because there have been zero documented runs with a head and cam 1.6 eco boost.
Thanks again Richard for these tests. Quick question, would the afr head be good for a stock bottom end LS3 with mild cam and a eaton tvs2300 PD blower to achieve a power goal of 650 to 700whp?
@@richardholdener1727 the shop and tuner I'm working with said that because I'm constrained to using only 93 pump gas without methanol or e85 fuel, getting maximum flow without restriction to keep boost down would be needed to make over 600whp with a 6.2
Alloy disperses heat sink better than iron which equals more timing but maybe one alloy head disperses better than the other alloy head. Interesting to see the timing graph overlay between the two alloy heads cheers Richy from 🇦🇺
Hey brother, I work for a performance shop and one question I’m super curious about and we’ve never had a back to back test is Frankenstein’s and Brodix heads in the mix. That would be awesome if you could do that. Thank you sir for all your hard work!
Frankesteins wont out flow brodix heads not in mid flow not in max flow. but would be nice to see i got a set of brodix heads bx 300 , we had frakinestiens befor changing over
@@richardholdener1727 Facts we switch over because we felt the mid range was soft for a 434 tall deck lsx twin 85mm turbos. pick up big time everywhere on the brodix heads.
Maybe the difference in power was the camshaft favored the AFR with the exhaust split. Perhaps TFS did not need as much exhaust split. AFR Flow numbers: LIft Value Intake CFM Exhaust flow CFM .200 159 112 .300 234 158 .400 293 207 .500 336 235 .600 366 248 .700 384 255 TFS Flow numbers: Lift Value Intake Flow CFM Exhaust Flow CFM .200" 146 113 .300" 231 171 .400" 294 215 .500" 334 240 .600" 363 252 .700" 382 258 AFR also has 13 more cfm on intake @.200".
I had time to think about it. I believe the .100 and .200 lift points of the afr had more flow enough to let the camshaft act slightly bigger due to more effective flow at low lifts. This increased power at higher rpm. I'm also curious as to the intake port entry vs the manifold.
What about oil pressure? I don’t remember this being mentioned but my thought is maybe if the way the oil flows through the heads is different there may be slightly more resistance. Or is that a long shot? Possibly the same idea with coolant through the heads. More heat, less power.
Richard, I'm building a 6.0 LS 408 stroker with twin VS Racing 7875 turbos and Texas Speed Titan intake. And really don't know what heads to run. I'm not trying to set it up for the street just the track. Should I run the Rec port or the Cath port? And can you received what ones to run?
Valves, tulip or back cut variances or valve job variances. Port shape or finish, where are those 5 cc'?, chamber shape, finish, afr lends itself to better swirl and tumble or better quench for better fuel mixture/atomization.
Valve cut can make a difference. I've read the 823 heads had a 3 angle valve grind and the 821 had 2 angle. I'm not sure how true it is. You know how the internet is. Valve angles do make a difference for flow.
Would like to see a similar test on a SBF between TFS 170 11R and AFR 165 Renegade. Maybe a 331, about 220 degree duration cam and Performer RPM intake.
Yes, I'm sure that they would be close to each other, but is one actually superior or the other? Is one better on the low end? High rpm? And people do actually still build these, as well as 350 Chevys, 383 Mopars, etc. If these don't interest you, then stick with the LS, Gen III Hemis, or Coyotes. I happen to like all of them.
The afr head has better flow most likely because of valve angle they have less flow restrictions because they have less shrouding when the intake vale pops off the seat.
Looking back at your previous LS3 tests, it seems the baseline was down on power. After valve jobbing LS heads with some heat cycles, there's always a couple valves not sealing 100 percent
This is great information, this will be one of my last mods after I go blower/boost for better efficiency and not cranking up psi. I wonder how much of an increase we will see if this was running on 10 psi, you think it will be similar 40hp gain or a lot more?
@@richardholdener1727 I just bought a set that I'm putting on my 416" LS3 with a D1X and a Holley Hi-Ram pushing 17psi. I made 940whp with that set up on the stock heads. Hoping to see a decent gain with these M311 Boost heads. Btw I made my choice for intake manifold based on your great videos! Kepp up the great work.
Is it valve angle? I believe the TFS allows a little larger cam due to altered valve angle. With that in mind, if you ran the largest cam you could in each would the tfs then come out on top? I’m curious how my ported LS3 heads would stack up to these two. As usual we have answered a question and have new questions.
I feel the Trickflow is stalling, air speed is definitely a factor here in my opinion, short turn radius ill bet the afr heads short turn is layed back alot further than the Trickflow, either that or minimal cross section pinch being the culprit
Great vid, Thanks sir. I don’t know why AFR is better but I will give all this vid viewer an advice: Do not buy TFS in any case I tried them on 2 cars and always rocker arms are moving from their location, intake valve not open and making a big misfire in the engine. Bad quality heads unfortunately.
Because I have a stock engine. I love your videos. But I would still like to see the difference in power between heads on an ls3 before I make any other upgrades.
@richardholdener1727 so you can confirm that they flow what TFS say they flow. As a few companies here in Australia have said AFR are just about spot on and TFS are out by upro 15cfm
Tests like this are what sets this channel a part from the others. Pitting two top shelf (for most guys) heads against each other and letting the cards fall where they may. No sponsors getting in the way, just an honest flow of information from Richard to the world. Thank you.
fact....I find it funny that if Richard makes a video that doesnt agree with someones claims they will claim he isnt independent.
I wonder how sponsors actually get in the way of a dyno test? The results are the results.
@@richardholdener1727I think he means that we the people appreciate that you don't push or favor a specific product unless it's just a better product.
@@richardholdener1727seems sponsors like positive results
@@richardholdener1727 you mean you dont put your thumb on the scale?
The 529 ft-lb of 6.2L is incredible out of the TFS, it shows incredible efficiency.
I have a Superflow flow bench with the wet option that uses fluorescent dyed liquid that shows flow direction coming out of the intake valve into the combustion chamber.
Many two valve closed chamber heads have swirl flow (hemi heads have tumble flow unless the intake port is asymetrical). At different valve openings the swirl pattern can move around in the combustion chamber. If the swirl pattern moves over the spark plug it can cool the spark plug and change or clench the combustion rate. Also the ingnition spark intensity is dependent on the temperature of the sparkplug because electron transport needed to generate a spark is temperture dependent and related to the Edison Effect (see WIKI - Thermonic Emission). The wet flow bench can give an idea where that's possibly occurring.
The intake port contour directly before the intake valve is extremely critical. This is why two different heads with identical airflow numbers can have completly different performance.
I think this is it. You have to remember that Gasoline kind of burns/expands like shit and extracting the most work out of it is highly dependent on a lot of factors.
The AFR has different valve spacing. The intake valve is moved about .090 (I think) inwards over the stock LS3 design.
Both the tfs and afr use a 12 degree valve angle over stock ls3 15 degree, both have identical valve spacing to each other.
Had both on the flow bench and the AFR’s were superior to TFS in our tests. TFS weren’t as advertised.
Lower than advertised I assume?
@@rustysausage69 yes lower. So were Mast.
So were talking about a 2% increase (approx). Maybe valve spacing , or subtile differences in the cnc work . The AFR heads are obviously moving more air at higher RPM. But again, barely 2% difference. And that is about the difference in intake port volume. So, math and stuff.....
From what I've read, Tony Mamo was the lead head specialist at AFR, and his manual porting designs of their cast heads made it into these castings. So effectively the AFRs are cast versions of Tony's manual porting techniques. When Tony left to create his own company, Mamo Motorsports, he's spent a lot of time porting the TFS260s also. From forum posts, it appears he sells more ported TFS. IIRC, his ported TFS have better CoD than off the shelf AFR.
I believe you are referring to his TFS LS7 head. Since AFR does not have a LS7 head Tony uses the TFS casting.
I called Tony when it was time to order heads, and he got the AFR and his thing with those.
Read several forum posts by him and he is using the AFR for the ls3
Running Tony's heads, they're a good deal for what you're getting.
Hello Richard… great video. Im glad that you used a more less stock LS3 for the testing. Shows more real world results for the average person that doesn’t have a monster cubed engine. I’m guessing it’s minor differences in combustion chamber shape design, plus the minor differences in port volume between the heads explains why the AFR shines.
I would check the short side radius on the intake side of both heads. I suspect the AFR's are probably a little straighter (less of a curve). If that's not the case, I'd then look at the 'pinch point' where the boss for the intake valve goes through the port. Might be slightly smaller on the Trick Flow.
I was thinking either that or valve angle.
The difference IMO is port DESIGN, and chamber design. AFR has usually excelled in these areas over "most" of their competition.
Maybe the small difference was the port volume 🤔?
This vid is golden this is exactly what I’m shopping for right now.
My thought is that if everything else is the same, the AFR with the slightly more port volume made slightly more power. That was the only difference between the heads.
Love how any time I think of a comparison or want to learn something, Richard already has a video out on it haha great guy, keep up the great work and one day I’ll have my motor built
Just out of curiosity what's the swirl ramp look like behind the intake valve on the two different heads?
LS3's are over valved relative to their bore size, not that its bad. That is why porting them and not killing torque below 4k rpm is tricky. So I would say the difference is really due to where the engine is making power, relative to each heads runner size. It's just able to pull better on the AFR and achieve higher port energy with it. The TFS may catch up or surpass with more displacement, compression, or rpm if it were made available, but port energy, average port speeds, cannot be discounted or ignored.
AFR did their homework. A couple years ago the talk was about wet flow (maybe from edelbrock). Maybe AFR did a little more work with wet flow in mind. Or maybe that 69cc is actually 66. Maybe the port length is a little shorter moving the powerband up just the little bit to carry torque and hp higher.
While the flow bench numbers may be nearly the same the port shapes (intake and exhaust) on the AFR heads may be working better with the intake and exhaust manifolds. It certainly appears they are flowing more air at higher RPM with the only difference being tested on an engine with intake and exhaust systems.
The air speeds in conjunction with the lay back and height of the short side radius on the afr heads is where the difference is.
Sunday morning video..... wuuuuuuuuut? Appreciate it R.H. !
I read an article years ago about AFR heads and there's more to heads than just air flow. AFR heads also tries to maximize air flow while maintaining a good balance of air flow speed and turbulence to better mix the air and fuel. That works great for carburetor engines, but I don't know about fuel injection. I can understand it working the same way if the fuel has to go in through the intake valve, but direct injection has the fuel injection straight into the cylinder and the heads only flow air. With your history and knowledge does that make sense from the testing you have done.
Love back to back tests like this
David Vizard would look into Port energy this is flow velocity time the mass flow and valve shrouding could make the difference you are looking for.
I'd like to know what valves and hardware the heads both have. That modest power difference could perhaps be explained If the valve/retainer package on the AFR heads is a fair bit lighter than the parts on the TFS heads.
Theoretically, any work put into compressing the valvesprings should be given back to the cam when the springs expand again on the closing ramp. This would be totally correct except for the bit of heating effect on the spring when compressed/strained - and also the inertial forces of the valve trying to hang open (newtons first law). The differences are small, but again, if the AFR valve package is notably lighter, I think it could explain what we're seeing here. It jives the effect only becomes notable at higher RPM.
Since both heads have very similar measurable flow numbers the difference in power has to be related to port swirl and atomization. Both heads have the same chamber cc but are there any differences in shape to alter the flame front? 🤔🤔🤔
He didn’t mention a change in timing
both wanted the same timing
Ok, im 1.15min in to this & you have asked a question. 🤔 is it retorical... nar.
Assuming all the info you have given us is correct & they for most part in the features you have identefied. I'm going with (valve) trumpet maybe seat cut, something valve 🤷♂️
Richard, do you have any comparable data or anecdotal information how the AFR and TFS heads compare to stock heads that have been CNC Ported? For example the TSP CNC porting on LS3 heads.
only compared to stock
I'm going to go with valve grind and seat angle difference between the two head brands. Both heads are amazing btw.
My guess would be that the AFR has better turbulence & swirl behavior.
There are many reasons one could think of. Most are already stated here. Shrouding if the valve has been move to solve this. Spring rates, better valve to cam geometry, Cam spec'd for the head/combo, better exhaust alignment. Flow is not everything. Port design/alignment to it's counterpart makes the best combo. The day and time you ran the dyno? Was the atmospheric pressure the same. Water grains and so on. Push rod length to the exact will give a little. Shit the list goes on. But for the $$$'s spent on heads the stock ones sent to Texas speed would be my pick.
Springs may play a part. Rocker geometry.
Valve job.
Valve angle.
That would show up in more or less flow. They were neck in neck
Thank you for another informative video. You know what I want to see... how much power can you make with the crate or junkyard 360 magnum, stock heads and a turbo! turbo magnum! turbo magnum! turbo magnum!
Swirl / combustion efficiency will lift torque everywhere. That really looks a lot like higher port energy.
I wonder if it has something to do with one these heads Possibly having a swirl ramp? I don't know much about LS3 heads but I know 5.3 heads have a swirl ramp
Johnprince got it. Moving the valves closer to center for more valve relief. Saw this on a head porting chanel. ls3's like valve relief! Looks like you used the stock intake for low rpm. Is the valve pic showing the afr head intake valve moved over the centerline between the two valves?
Which way does the 2-3 cfm flow difference go between the AFR & TFS? Is it always in favor of the AFR? A 2-3 cfm difference at low lifts (and therefore flow rates) can help significantly.
But anyway, for a stock displacement LS3, aftermarket heads are not a good value in terms of Dollar per HP. 40 HP (max) gained per $2600 for a set of heads. That's $65/hp. The best value is to spend $5-600 on a cam and springs, and you get 50-70 HP.
Very true. Whats your thoughts on Carb conversion? worth it for the money saved?
Difference is between valve back cut and undercut. Could also be that the AFR heads use lighter valves.
Maybe differences in deck thickness and water jacketing make the AFR heads retain more heat.
did you try swapping the valves?
touch up the valve jobs
valve job analysis
valve analysis stem coatings. finish, materiel, shape? TI option Inconel option common sizes
chamber analysis' any differences in guide materiel, seat materiel? (like for HD)
velocities?
which? blower
I've wondered why not a canted valve head with a semi rotated chamber
cheers
Was the valve spring package the same? The AFR may have been slightly better at controlling valves (bounce at the seat). Maybe it had lighter valves and retainers or a little more appropriate spring for the combination.
Valve float dyno curves don’t look like that
@@cedricwilson2055 Where do I say float? i didn't say valve float, I said bounce. Clearly the spring wasn't in full float but a proper spring/valve comb is worth power on a like for like situation.
Because Brian Tooley doesn’t work at Trick Flow anymore?
Don’t AFR’s come with a hollow stem valve vs TFS coming with solid SS intake valve?
I would honestly like to see the differences of a ported head and cam on the ford fiesta's 1.6 ecoboost, because there have been zero documented runs with a head and cam 1.6 eco boost.
Did you mention they’re both 12 degree heads? The AFRs are 5cc bigger and have a different shape in the ports.
Valve location? Maybe afr are further from cylinder wall?
Difference in valve jobs? Slightly different angles?
Thanks again Richard for these tests. Quick question, would the afr head be good for a stock bottom end LS3 with mild cam and a eaton tvs2300 PD blower to achieve a power goal of 650 to 700whp?
you don't need ported heads for that
@@richardholdener1727 the shop and tuner I'm working with said that because I'm constrained to using only 93 pump gas without methanol or e85 fuel, getting maximum flow without restriction to keep boost down would be needed to make over 600whp with a 6.2
600 should be easily accomplished @@KNS_Racing
Alloy disperses heat sink better than iron which equals more timing but maybe one alloy head disperses better than the other alloy head. Interesting to see the timing graph overlay between the two alloy heads cheers Richy from 🇦🇺
same timing on both
Hey brother, I work for a performance shop and one question I’m super curious about and we’ve never had a back to back test is Frankenstein’s and Brodix heads in the mix. That would be awesome if you could do that. Thank you sir for all your hard work!
Frankesteins wont out flow brodix heads not in mid flow not in max flow. but would be nice to see i got a set of brodix heads bx 300 , we had frakinestiens befor changing over
you need a lot of motor for those heads
Yeah, most of the setups are the supercharged motors.
@@richardholdener1727 Facts we switch over because we felt the mid range was soft for a 434 tall deck lsx twin 85mm turbos. pick up big time everywhere on the brodix heads.
@@loundclear9279switching from what head to Brodix??
valve angle? TF has always played with valve angle and spacing, I remember when the first set of twisted wedge heads came out for the old 5.0....
Maybe the difference in power was the camshaft favored the AFR with the exhaust split. Perhaps TFS did not need as much exhaust split.
AFR Flow numbers:
LIft Value Intake CFM Exhaust flow CFM
.200 159 112
.300 234 158
.400 293 207
.500 336 235
.600 366 248
.700 384 255
TFS Flow numbers:
Lift Value Intake Flow CFM Exhaust Flow CFM
.200" 146 113
.300" 231 171
.400" 294 215
.500" 334 240
.600" 363 252
.700" 382 258
AFR also has 13 more cfm on intake @.200".
I had time to think about it. I believe the .100 and .200 lift points of the afr had more flow enough to let the camshaft act slightly bigger due to more effective flow at low lifts. This increased power at higher rpm. I'm also curious as to the intake port entry vs the manifold.
Could be the valve shape, gow air flows off the short side, fuel distribution or combinations of all.........
What about oil pressure? I don’t remember this being mentioned but my thought is maybe if the way the oil flows through the heads is different there may be slightly more resistance. Or is that a long shot? Possibly the same idea with coolant through the heads. More heat, less power.
Richard, I'm building a 6.0 LS 408 stroker with twin VS Racing 7875 turbos and Texas Speed Titan intake. And really don't know what heads to run. I'm not trying to set it up for the street just the track. Should I run the Rec port or the Cath port? And can you received what ones to run?
after market heads with thick decks if you plan to turn the 7875s all the way up
AFR or Trick Flow?
Thank you so much for your reference
Check valve angle, valve spacing, and chamber shrouding
Valves, tulip or back cut variances or valve job variances. Port shape or finish, where are those 5 cc'?, chamber shape, finish, afr lends itself to better swirl and tumble or better quench for better fuel mixture/atomization.
Maybe bowl and throat percentages
Now do this TFS vs AFR on a SBF pretty please 🙏
What injectors did u use? For the price of the heads i would sick with the stock head
Are the chamber shapes different? Discharge coeficient?
Valve cut can make a difference. I've read the 823 heads had a 3 angle valve grind and the 821 had 2 angle. I'm not sure how true it is. You know how the internet is. Valve angles do make a difference for flow.
The 821s are better
Thank you, Richard, for the information 😊
My guess would be air speed difference over the short turn or more of a variation port to port for whatever reason. 😅
Would like to see a similar test on a SBF between TFS 170 11R and AFR 165 Renegade. Maybe a 331, about 220 degree duration cam and Performer RPM intake.
True it was really important whether you made 350hp or 360hp back in 1995
I also want this, but I wanna see it on a 306 and a 331/347
Yes, I'm sure that they would be close to each other, but is one actually superior or the other? Is one better on the low end? High rpm? And people do actually still build these, as well as 350 Chevys, 383 Mopars, etc. If these don't interest you, then stick with the LS, Gen III Hemis, or Coyotes. I happen to like all of them.
I’m going to say valve springs. Everyone always forgets about valve train. Springs make a difference.
My guesses would be either the shape inside the ports or valve chambers or perhaps if there is variation in the surfaces of the intake ports.
What about the exhaust ports? Is there something there that could lead to the difference.
The afr head has better flow most likely because of valve angle they have less flow restrictions because they have less shrouding when the intake vale pops off the seat.
Maybe valve spring rates were just that much different? Or the combustion chamber was a little different?
Valve train is the difference. It takes less horsepower to run the AFR's valves and springs.
Looking back at your previous LS3 tests, it seems the baseline was down on power. After valve jobbing LS heads with some heat cycles, there's always a couple valves not sealing 100 percent
that was mentioned
This is great information, this will be one of my last mods after I go blower/boost for better efficiency and not cranking up psi. I wonder how much of an increase we will see if this was running on 10 psi, you think it will be similar 40hp gain or a lot more?
He has tests up for what you’re asking. More na hp more blower/ turbo hp.
@richardholdener1727, do you think it would make much difference if fed by a 3L whipple on a street engine?
either of these heads will work well
@@richardholdener1727 thank you for the response!
What is the water jacket size on the 3 sets of heads? There could be a heat difference. 😊
I'm going to guess valvetrain control on the most minuscule scale. A little wobble somewhere.
Perhaps the valve guides are more streamlined in the AFR
Richard, have you done any testing with the Frankenstein M311 heads?
no sir
@@richardholdener1727 I just bought a set that I'm putting on my 416" LS3 with a D1X and a Holley Hi-Ram pushing 17psi. I made 940whp with that set up on the stock heads. Hoping to see a decent gain with these M311 Boost heads.
Btw I made my choice for intake manifold based on your great videos! Kepp up the great work.
Is it valve angle? I believe the TFS allows a little larger cam due to altered valve angle. With that in mind, if you ran the largest cam you could in each would the tfs then come out on top? I’m curious how my ported LS3 heads would stack up to these two.
As usual we have answered a question and have new questions.
Depends on who ported them. But in his ls head shootout stock heads CNC ,’d didn’t out power aftermarket heads
I feel the Trickflow is stalling, air speed is definitely a factor here in my opinion, short turn radius ill bet the afr heads short turn is layed back alot further than the Trickflow, either that or minimal cross section pinch being the culprit
AFR relocated the valves in the combustion chamber thus reducing their shrouding.
#TeamAFR 🏁
Curious what the cost and availability difference is between these two very nice heads?? Thanks for a great video!
just go to Summit racing-they sell both
Was valve throat ported the same?
One has better valve job and guide clearance ?
Great vid, Thanks sir.
I don’t know why AFR is better but I will give all this vid viewer an advice:
Do not buy TFS in any case I tried them on 2 cars and always rocker arms are moving from their location, intake valve not open and making a big misfire in the engine.
Bad quality heads unfortunately.
we never had issues with either
I can share with you the picture 😢
You should have ran a bigger cam why have a head that peaks at 700 lift and not use it. Especially with that big ci.
Maybe valve shape? Maybe valve angles?
1 1/2 * of valve angle. TFS is 13.5* VS AFR 12*
Let’s look right above the valves I bet afr is more direct
Could maybe be valve materials and or weights
Intake and or exhaust port alignment.
Do you have videos where you test heads on stock engines? Without mods?
yes but why would you?
Because I have a stock engine. I love your videos. But I would still like to see the difference in power between heads on an ls3 before I make any other upgrades.
I think you will find that TFS fudge their numbers on flow. Have heard that from a few cylinder head shops in Australia.
we flow tested both
@richardholdener1727 so you can confirm that they flow what TFS say they flow. As a few companies here in Australia have said AFR are just about spot on and TFS are out by upro 15cfm
Valve angle the same?
You should ask David visard but my guess is different port velocity
Combustion chamber ? And Quenching ?
chamber size was the same
Well it comes down to doing the research on the airflow. Some may call it the "air flow research".
Lol
How could you not have Mast Black Label heads?
Because they dont donate them for testing
Mast Black label heads were tested many times in the past-see the big head test videos
@@richardholdener1727 Ok
Chamber design maybe?
What was the amount of timing for each head ? Curious on the differences.
SAME
@@richardholdener1727 how much ? Or is that a trade secret ?
30 degrees at the hp peak-there are no secrets here
This is great thanks