I just finished rebuilding my starter as per your video. My starter was a little different inside than yours, but they operate the same way. I am confident when I bench test this tomorrow that it will work just fine. Then it goes back in the car to replace the aftermarket one that I bought. I may ever check it out to see why it’s not working like it should. Thanks again for a great video. No jokes, no swearing, no nonsense. Just a great video.
Thank you so much for making this! I followed this and rebuilt my girlfriend's Honda Element starter. Did exactly what you described and showed and, when I did the test, it roared to life like a brand new starter, stronger than ever. Thanks again for making this and the great explanation that you provided.
Thank you so much for putting this very informative video together. Although my car was crv 2015 this video helped a lot in rebuilding the starter motor. I had to order a new brush assembly. The first time I forgot to put on the little plastic on plunger and had to redo it the second day 😢. Finally it worked. Thank you so much.
Great video guide. My 2014 honda civic starter died. So instead of spending a fortune on a new one. I rather just had it rebuild and reuse it. Thank you for the video, it's really helpful. Keep up the great guide. Very much appreciated for this awesome guide in rebuilding a starter. The new one are just not worth spending an arm and a leg for it. There's just no real value investing into a new if the old one can be rebuild to last another lifetime with proper maintenance.
Awesome video! My 2015 Honda CRV has 90,000 miles on it and the starter would only click. I replaced my OEM starter with a new aftermarket starter and within a month it started acting up. I will be trying to rebuild my factory starter as per this great video. I’m hoping my only problem is worn out brushes. I’ll find out when I take it apart. Thanks again for this awesome video. This gives me confidence that I can rebuild mine.
great tutorial on those Honda-Mitsuba soft brushes starters. I really like your wisdom with epoxy and grease to keep a clean ground path. I tend to favor high-temp SILICONE (brake pin lube) over petroleum grease that evaporate with engine heat. Thank you Mike. 👍👍👍
Thanks for the video I have an aftermarket made in Mexico piece of junk the first one died completely after a month this next one is giving me problems already...would sanding the copper contact points with 600 grit sandpaper help at all ?
If the contacts are black, then yes, they need cleaned. Also, remove battery, take to a battery vender, have it charged and checked. Black contacts are a result of low voltage to the starter.
If you watched the video, and you feel like this is something you'd like to do, then yes. If you don't have any tools, and don't like to work on cars, then no.
Plug it in, then cover with RTV silicone would be a lot easier. Don't like to encourage doing things wrong, but replacing the plastic on that one could go badly.
Thanks for the reply. I have a second starter and will just use the nose with the intact plastic connector. I’m kinda kicking myself for not being more careful and breaking that housing. Live and learn
Don't support doing this at home, too complicated to explain in words and there is a good chance the coil or diode will fail from dis assembly stress. If your bendix is junk, we advise buying a new or used starter (car-parts.com)
Mikey would have helped my troubleshooting a little bit if you had owned up to putting the ride on backwards in this video. You corrected the problem when you drop the starter putting it back together but didn't say anything about it and it was barely on the camera
I just finished rebuilding my starter as per your video. My starter was a little different inside than yours, but they operate the same way. I am confident when I bench test this tomorrow that it will work just fine. Then it goes back in the car to replace the aftermarket one that I bought. I may ever check it out to see why it’s not working like it should. Thanks again for a great video. No jokes, no swearing, no nonsense. Just a great video.
Thank you so much for making this! I followed this and rebuilt my girlfriend's Honda Element starter. Did exactly what you described and showed and, when I did the test, it roared to life like a brand new starter, stronger than ever. Thanks again for making this and the great explanation that you provided.
Thank you so much for putting this very informative video together. Although my car was crv 2015 this video helped a lot in rebuilding the starter motor. I had to order a new brush assembly. The first time I forgot to put on the little plastic on plunger and had to redo it the second day 😢. Finally it worked. Thank you so much.
Great video guide. My 2014 honda civic starter died. So instead of spending a fortune on a new one. I rather just had it rebuild and reuse it. Thank you for the video, it's really helpful. Keep up the great guide. Very much appreciated for this awesome guide in rebuilding a starter. The new one are just not worth spending an arm and a leg for it. There's just no real value investing into a new if the old one can be rebuild to last another lifetime with proper maintenance.
Awesome video! My 2015 Honda CRV has 90,000 miles on it and the starter would only click. I replaced my OEM starter with a new aftermarket starter and within a month it started acting up. I will be trying to rebuild my factory starter as per this great video. I’m hoping my only problem is worn out brushes. I’ll find out when I take it apart. Thanks again for this awesome video. This gives me confidence that I can rebuild mine.
You are a great teacher. This is the best instructional video I ever watched.
Thank you very much.
Mike excellent. I just love it. Greeting from San Diego. I got a new starter but next time I will rebuild it because you.
great tutorial on those Honda-Mitsuba soft brushes starters.
I really like your wisdom with epoxy and grease to keep a clean ground path.
I tend to favor high-temp SILICONE (brake pin lube) over petroleum grease that evaporate with engine heat.
Thank you Mike.
👍👍👍
White Lith is the cheapest and works as good as anything out there. It's not petro.
Thanks for the well explained and detailed video, greatly appreciated!!!
Awesome step by step! Thanks very much.
Great video Mike. Thank you for sharing.
Thanks for the info! I just orderd my oem parts to rebuild mine
Tinted ignition sealer for the armature? What product did you use ? Thanks again
Just installed a rebuild kit on my 13' accord exl 4cyl. Take note of the old one before tearing it apart. Starts first push again. Thanks
Thanks for the video I have an aftermarket made in Mexico piece of junk the first one died completely after a month this next one is giving me problems already...would sanding the copper contact points with 600 grit sandpaper help at all ?
If the contacts are black, then yes, they need cleaned. Also, remove battery, take to a battery vender, have it charged and checked. Black contacts are a result of low voltage to the starter.
Doesn't bearing grease work better for the planetary gears or... Maybe that red Lucas stuff?
This should also work on crv 2005 right?
Thanks bud. You save me $500!
Buen video master. A mi me toco cambiar el bendix y eso es una webeo gigante. Saludos y gracias por compartir.
Como lo cambiaste?
Very helpful video, have a 2006 Honda Civic coupe automatic, any idea if I should go with a rebuild or no? Thanks
If you watched the video, and you feel like this is something you'd like to do, then yes. If you don't have any tools, and don't like to work on cars, then no.
@@rebuilderinabox thanks, would it be same for SM-71001 Mitsuba starter too?
@@rebuilderinabox can similar instructions be used for SM-71001 Mitsuba? Thank you
@@maverickperson5443 Yes
@@rebuilderinabox thanks, is brush holder assembly same too? One you listed in your description.
You teach very nice and great job
Is the small spade connector on the nose easily replaced? The plastic housing on mine is damaged.
Plug it in, then cover with RTV silicone would be a lot easier. Don't like to encourage doing things wrong, but replacing the plastic on that one could go badly.
Thanks for the reply. I have a second starter and will just use the nose with the intact plastic connector. I’m kinda kicking myself for not being more careful and breaking that housing. Live and learn
Immensely helpful, thank you.
Would
Like to know how to order the parts
In Australia 🇦🇺
What happens if u don't have the three small springs?
Don't really know for sure. Obviously it may not function properly. Something like that could only be known by experiment.
I rebuild starters and alternators for a living. I remove the diode and the Bendix. The diode is usually 50/50 good or bad.
You mean the coil right?
@@rebuilderinabox well yes I remove the solenoid coil to get to the Bendix. And I also replace the diode. The one that's held by a tiny screw.
Can you make a video on how to remove the bendix??
Right now, we don't plan on going there. 99% re-usable and don't want you to do that un necessarily. It would cause problems.
How open Sol. switch and bendex drive
Please how do you get the Bendix out please help
Don't support doing this at home, too complicated to explain in words and there is a good chance the coil or diode will fail from dis assembly stress. If your bendix is junk, we advise buying a new or used starter (car-parts.com)
Where to you buy a kit
alternatorstarterrebuildkits.com
thanks Mike
very good teacher
Mikey would have helped my troubleshooting a little bit if you had owned up to putting the ride on backwards in this video. You corrected the problem when you drop the starter putting it back together but didn't say anything about it and it was barely on the camera
saludos amigo.
Muito obrigado
😎👍