I don't normally watch the ENTIRE video that people post of builds, but, this. Wow. Absolutely beautiful. I have no clue why there are ANY thumbs down. Bravo.
@@KingMinhvuong --- A very easy and low costs EMI "shield" is to use twisted pair signal lines and power lines. I am sure there are plenty of examples on the Internet. The antenna line is probably well shielded but I would make sure the shield is getting connected to a good ground. I do not know if you are getting any kind of "hum" or static (especially when other noisy electronics are around) but if you are EMI shielding will take care of that. If you are not getting any kind of interference, I suppose no additional shielding is required.
Очень красиво получилось, вообще-то я это нарисовал год назад, но смотрю в живую очень красиво получилось!!! Вот красный цвет сногщибательно получилось бы!😍😍😍 Молодец автор!
Поющая табуретка? чувак, да ты гений)))) только регуляторы перепаяй на какой нибудь кабель с экраном! круто, однозначно лайк! на эпоксидку ещё подсветку бы сделал, вааще огонь!
Beyond good. W/o question the best build video I've seen on RUclips. Insane talent with a mitre saw (20:30); invovles fine woodwork, electronics, hifi, wireless, and resin! And every one of them nailed. Truly a great device here.
amazing work tbh looking at the video even speed up was painful, because someone who knows the amount of effort it takes to get every attention to detail to the level you did yet alone doing the actual work. kudos on getting so well done to the last detail. looking at the size of the sub, it looks powerful enough to explode that box. hopefully the amp doesn't drive it that hard :) cannot think of anything you could do better nice job
It's almost an art form, building stuff up from pieces of wood and glue and a few electrical components making stuff that is better than stuff you'd get shopping
Love this video, definitely one of your best works. I was wondering something (still watching it). I'm an audiophile, so I know there is a big difference in electronics in various stereos, amps, etc. (not saying you used cheap stuff, just going with an idea here). What about picking up something like a used Yamaha stereo receiver, open that up and taking out the internals from that. You'd have something pretty decent for quality sound, and you'd have the amp, power supply, controller, etc. You could use something that has Bluetooth already, or even get an older model and just add Bluetooth for the input.
Stunning piece of furniture combined with a great electronics build. I am very envious of your talents. You not only seem talented and detail oriented, but you share your designs and techniques. Thank you.
Super cool stuff man, it's about time I saw someone do a super legit job on one of these, you have something that will last more than a few months and won't rattle apart,. Well done,,BRAVO!!
Congratulations. It was an excellent craftsmanship and handicraft work. (I can hear those who say that if I had those technical tools you have, I would do it myself. Tools alone are useless. The important thing is craftsmanship.)
I really like this design!!! It looks so nice but I was sure you would put LED strips in the corners and behind the ring around the charger. Not so it did a crazy club light show, but just something soft and glowing. Wow, great work and ideas. I hope you and those special to you stay happy and healthy.
This was an amazing piece of craftsmanship and artistry at it's best. I would love to build one myself. But I don't have the professional tools that you have. And to be frank I would need a detailed instruction manual of everything that you did. Especially for all of the electronics that you installed in this work of (Art). Congratulations on your abilities to create this.
I watched from beginning to finish I enjoyed watching you create and build on a modern artist and like to build things to thank you for posting your creative work I got a big pleasure out of watching thank you
GREAT wood working skills. I would have put some LED lights behind the blue epoxy. That would have really been cool and would have showed off your epoxy work. Great job!!!
Amigo esto es espectacular con un trabajo ilimitado por su parte y una calidad inusual en un ser humano con un sin fin de genialidades , un gran 👏 👏 👏 👏 👏 por sus características , ventajas y beneficio del producto elaborado por usted .
You are really a brilliant inventor. I wish you a lot of innovation and success in your beautiful work 🇩🇿I would really like to get this device. I was impressed by your work, your brother from Algeria
When you showed us that you cut something wrong you did not edit that out. It lets me know that we all make mistakes and can still work with them. Excellent work. I love this. Make me one. :D
I have been watching King MinhVuong for a while. I love every single project you've shown on your channel. I would love to know what city you are located in VietNam so that I could stop by to say Hi and bring you some gifts.
Really nice I’ve seen a lot of improvement since your first video of doing speaker. Hope to see u soon doing a DIY TWS speaker try to use a 6.5 sub to handle and produce that perfect bass punch and some 4 inch driver for midtone
I must say I really like this masterpiece do you have plans and measurements on this design? So I could do one just like it really like the quality of the build and the speaker quality is excellent. The type of wood that you have chosen and the epoxy blue really makes it pop.
What nationality are you and where do you live? Your craftsmanship is another level, appreciate the works of a perfectionist like you. It's just not creativity, it also shows hard work, precision skills, consistency and discipline.
Really awesome build, watched the entire video couldn't look away it was addictive! Kinda hurt my feelings a tiny bit because the blue epoxy wasn't translucent and lighted.
Hey man, great video. Awesome piece of kit. The sped up footage/sound of the things like the router makes for ear bleed material. Maybe mess with the EQ in the mix
Highest end construction detail. I love the stand and the wireless charger. Not sure about the choice of drivers, especially since everything else is so high end. Very instructional video. I like the colored epoxy but in small areas of detail only. Love your logo in it, not a huge fan of the dovetails but its all good. This is an amazing piece and I would love to hear it in person.
Well done sir.. It's looking so beautiful, thank you and appreciate your hard work. Can I buy this one? I really want this type of customize speaker with wireless charger.. Please reply me ..
Tbh it’s like he’s rushing it, I know it looks good but a bit more focus and it wood look amazing. Idk maybe I’m just mean. Going to check out some more of his stuff.
I don't normally watch the ENTIRE video that people post of builds, but, this. Wow. Absolutely beautiful. I have no clue why there are ANY thumbs down. Bravo.
Thank you!
Epoxy Inside in.............
Iesejws9wj2mwjiwiwkwiwiqk1ow91181i1kqo1oq9wkkwow91k1o1owiwowo1ow9w8wiiwiqowo1kwi1iq91iw82iwi1iw91i1ii191i1iq81i1i1jkowowiwiwiwiiw9wiwiwow9wiwi1i182j1j2jw82i2j2ij2ii1ii2i1192i1i1i191i1k1i2iiww2ii2iwi2i2iwi2iw9w2jwiw8wijwi1o1jwiwiwiwiwiwiwiwiwiwwiwiiwwo9wi2iwiwiiw9owow9w9w2k1iwiwiwiwow9iwj1iwi2i1wi1iw9i22iw92iwiw9wi1o29wiwiiw
Me too.
@@nathankimutai8135 pshshshsh ne heren e
Attention to detail is off the scale. This thing is a work of art, inside and out. And runs on battery power too? GENIUS!
Thank you!
Absolutely mint craftsmanship. A machine will never replace this level of skill and attention to detail.
Thank you!
A very enjoyable 49.24 minutes.. a masterpiece.. Thx for share this art.. Peace from Indonesia.. 🇮🇩
woi tod
Wow ternyata bukan cuman saya yg tersesat di sini😂
Creativity, art and taste, God willing, for Halide, who mastered the manufacture
Мастер, ты великолепен во всем! Идея устройства, материалы, кабель-менеджмент… и даже Айфон у тебя самой удачной модели!!! Жму руку! Уважаю!
Thank you!
Hi friends! What do you think about this idea. Do you like it?
Absolutely
Pretty much
Yeah that was awesome
Can you try JBL flip like speakers please
Yes
Now that’s 45 minutes of my time extremely well spent. Super Super project congratulations
Nicely done. I would probably add two features.
1. EMI shielding to the electronics - especially the antenna cable.
2. Lighting effects.
Thank for your advice! I will try to do that.
@@KingMinhvuong --- A very easy and low costs EMI "shield" is to use twisted pair signal lines and power lines. I am sure there are plenty of examples on the Internet. The antenna line is probably well shielded but I would make sure the shield is getting connected to a good ground. I do not know if you are getting any kind of "hum" or static (especially when other noisy electronics are around) but if you are EMI shielding will take care of that. If you are not getting any kind of interference, I suppose no additional shielding is required.
Audio meets woodworking. You won my heart, love those dovetails
Thank you!
Очень красиво получилось, вообще-то я это нарисовал год назад, но смотрю в живую очень красиво получилось!!! Вот красный цвет сногщибательно получилось бы!😍😍😍 Молодец автор!
,,,,p
Không còn gì để nói.Đẹp hài hòa tinh tế và tay thợ hoàn hảo
That's The Most Beautiful Table Speaker I've Ever Seen And It's Completely Home Made. I'm Very Impressed. 😍⚡🔊
Thank you!
@@KingMinhvuong 😊
@Xavier Simon Sure
@Jalen Korbin that's Awesome. ^^
You have some quality tools and the skills to go with it. Nice work
Thank you!
It
Mui lindo ese parlate cuando sale a la venta
@@wilkashinya5143be
By far the best speaker system i have seen so far on youtube...perfect design
Thank you!
Holy moly when i finished watching the video i just realized i'm watching 49:23 mins video. Good work!!!!!!!!!!!
I don't notice it is 49:29 till I saw your comment lol 😂
I thought it is 10 min
same
@@Moroccanespressoclub me too😂
It was definitely one of the best videos that I've ever watched on youtube. I enjoyed every minute of it and watched like a tv show. Great job👏🤝
Поющая табуретка? чувак, да ты гений)))) только регуляторы перепаяй на какой нибудь кабель с экраном! круто, однозначно лайк! на эпоксидку ещё подсветку бы сделал, вааще огонь!
Editing is so smooth I didn't even realise video is 50 minutes long great work
Thank you!
Oi
Quanto custa uma caixa 10
16993813648
Beyond good. W/o question the best build video I've seen on RUclips. Insane talent with a mitre saw (20:30); invovles fine woodwork, electronics, hifi, wireless, and resin! And every one of them nailed. Truly a great device here.
Thank you!
I would love to learn and work at your workshop
Hats off
Standing ovation
💯/💯
amazing work
tbh looking at the video even speed up was painful, because someone who knows the amount of effort it takes to get every attention to detail to the level you did yet alone doing the actual work.
kudos on getting so well done to the last detail.
looking at the size of the sub, it looks powerful enough to explode that box. hopefully the amp doesn't drive it that hard :)
cannot think of anything you could do better
nice job
Thank so much for your comment!
I am really glad that you are using chisels made in the Czech Republic ❤
It not too bad. Thank you!
taky jsem si všiml že má Narexy.
@@sHpy00n je hezké vidět kam až se dostane České nářadí :)
This is not woodwork this is brain work 🤯🤯🤯😎👋☝👌
Thank you so much!
This looks like something that would come out of a DIY perks video the bluetooth speaker is so finely built .
It is always a joy to see the King at work, you want to watch in all in one hit!
The grade of the wood is very nice! This is a work of art indeed.
Thank a lot!
Great work with lot of tools, after watching the video no one will go without comment, your effort is priceless, just great. Love it ❤
Thank you!
ñn
ññ
;ññmññ ññ mo
Ur way of doing dis project was marvellous.... U r simply gre
Olmo! I watched 49 mins long handcraft video without skip.
Amazing bro!
Thumbs Up!
Thank you!
It's almost an art form, building stuff up from pieces of wood and glue and a few electrical components making stuff that is better than stuff you'd get shopping
That’s the point
almost?
@@squishyflac ៀឥឹៀឹឥៀៀឥឹៀឥឥៀៀឥឹឥឹៀៀឥឹឥៀៀឹឥឹឥឹៀឥឹៀឹឥឹៀៀឹឥឹឥៀៀៀឹៀឹឥ២ឥឹៀឹ២ឹៀឹឹឥៀឹៀឹៀឹៀឹៀឹឥឹឹឹៀឥឹឥៀៀឹឥឹឥឹៀៀ២ឹៀៀឹៀឹៀឹៀៀឹៀឥឹឹៀៀឥឹៀឹឹឥ២ឹៀឹឥ២ឹឥឥឹឥឹឹៀឥឹៀឹឹឹៀឥៀឹឥៀឹឥៀៀឥឹៀឥឹឥឥឹ២ឥឥឹៀឥ២ឥឹៀឹៀៀឹឥឹៀឹឥៀឹឥ២ឥឹឥឹៀឹៀឹ២ឥឥឹៀៀឹៀឹឹៀឹឹៀេៀឹៀឥៀៀឹឹៀឹឥឥឥឹឥៀឥឥឹៀៀឥៀឹៀឹៀៀឥឹឥៀឹៀឥ៣ឹៀៀឹ២ៀឥឥឥឹឥឹឥឹឥៀឹឥឥឹៀៀឥឹឹឥៀឹឹឥ២ឹឥឹឥឹៀៀឥៀ២២ៀឥ២ឹៀឥឥឹឥឹឥ២ឹ២ៀ៣ៀឹឥឹៀៀឹឥឹៀឹឥៀឹឥៀឹៀឹៀឹឹឥឹឥឹៀ២ៀឹឥៀឹៀឹៀៀឹៀៀឹឹឥឥឹឥៀ២ឥឹឥៀឥឥសឹៀឥៀៀឹឥឹឹឥៀៀឹឥឹឹឥៀឹៀឥឹឥ២ឹឥឹឹ៣ៀ
Love this video, definitely one of your best works.
I was wondering something (still watching it). I'm an audiophile, so I know there is a big difference in electronics in various stereos, amps, etc. (not saying you used cheap stuff, just going with an idea here). What about picking up something like a used Yamaha stereo receiver, open that up and taking out the internals from that. You'd have something pretty decent for quality sound, and you'd have the amp, power supply, controller, etc. You could use something that has Bluetooth already, or even get an older model and just add Bluetooth for the input.
Thank so much for your comment!
Gorgeous 😍!
Stunning piece of furniture combined with a great electronics build. I am very envious of your talents. You not only seem talented and detail oriented, but you share your designs and techniques. Thank you.
Sorry! I don't have drawing for it
Super cool stuff man, it's about time I saw someone do a super legit job on one of these, you have something that will last more than a few months and won't rattle apart,. Well done,,BRAVO!!
Thank you!
These 50 minutes of my live. Well spend. This is a masterpiece. I enjoyed the video 😊
Congratulations. It was an excellent craftsmanship and handicraft work. (I can hear those who say that if I had those technical tools you have, I would do it myself. Tools alone are useless. The important thing is craftsmanship.)
Thank so much for your comment. Respect!
Wow, I wish I have half of your skills. Best chair I have ever seen. Lol
The chair powered the ass 😆
SUPER. СУПЕР. Молодца, просто супер. Мастер на все руки. С меня лайк и естественно подписка.
Bagus skali bang
I really like this design!!! It looks so nice but I was sure you would put LED strips in the corners and behind the ring around the charger. Not so it did a crazy club light show, but just something soft and glowing. Wow, great work and ideas. I hope you and those special to you stay happy and healthy.
Thank you so much!
This was an amazing piece of craftsmanship and artistry at it's best. I would love to build one myself. But I don't have the professional tools that you have. And to be frank I would need a detailed instruction manual of everything that you did. Especially for all of the electronics that you installed in this work of (Art). Congratulations on your abilities to create this.
Thank you so much!
หข
หจ
Kon o Jaana bpi kk join look kon io kk ok j kk JJ oo Vikki oo j kk kk jjj oo jk oo
K kk kj
A masterpiece of workmanship, thank you
I watched from beginning to finish I enjoyed watching you create and build on a modern artist and like to build things to thank you for posting your creative work I got a big pleasure out of watching thank you
Thank you so much!
GREAT wood working skills. I would have put some LED lights behind the blue epoxy. That would have really been cool and would have showed off your epoxy work. Great job!!!
Thank you!
Amigo esto es espectacular con un trabajo ilimitado por su parte y una calidad inusual en un ser humano con un sin fin de genialidades , un gran 👏 👏 👏 👏 👏 por sus características , ventajas y beneficio del producto elaborado por usted .
Love Your Videos Bro.
Love From ASSAM (INDIA) 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
Baground music neme please,,,NCS ??? which sing
Очень приятно брынчат и шумят детали. Звук качественный. И качество видео оставляет желать лучшего) залип я на долго )))
Походу тут один русскоязычный человек. Буду вторым).
Being a carpenter myself those dovetails are at a new level so sweet!
Thank you!
Наверное данная работа стоит бешенныз денег!!!браво!!!
фигню сделал
@@Антонз-р7я ты сам что сделал?
@@МихаилЛебедев-ч2ф Да ни че оно само не сделало. Только срать в коментах может, вот и все его призвание.
@@Антонз-р7я а сам то ты что сделал ? Домик в майнкрафте ?
You are really a brilliant inventor. I wish you a lot of innovation and success in your beautiful work 🇩🇿I would really like to get this device. I was impressed by your work, your brother from Algeria
Thank so much for your support!
Wow what a work of art. Absolutely beautiful. True craftsmanship. Thanks for sharing.😀
it looks fantastic I'm quite sure it sounds nice but there's no real stereo separation not that today's music really need it
Very well thought out and a lot of planning into that!!! I would rock out to the 70’s though!!
PLEASE LET ME KNOW WHERE CAN I BUY ONE OF THESE SPEAKERS THERE…do you sell them ?
That is gonna cost you a few buck. I guess.
Un sublime matadon de trabajo , con resultados EXQUISITOS Felicidades y a disfrutarlo pero con música de calidad lo merece, un abrazo, ☀️☀️☀️
When you showed us that you cut something wrong you did not edit that out. It lets me know that we all make mistakes and can still work with them. Excellent work. I love this. Make me one. :D
Thank you!
EXCELLENT Only one detail was missing, inserting some LEDs in the resin to give it a touch of light. but otherwise my most sincere congratulations.
I have been watching King MinhVuong for a while. I love every single project you've shown on your channel. I would love to know what city you are located in VietNam so that I could stop by to say Hi and bring you some gifts.
V!b!bn
Thank you so much!
Người thợ Việt Nam làm tuyệt quá! Chúc mừng!
C est du très bon travail !!👍🔧🔧🔧,un éclairage a led aurait été le bienvenu !! Vous devez fabriquer et vendre sur eBay !!👍👍👍👌
Really nice I’ve seen a lot of improvement since your first video of doing speaker. Hope to see u soon doing a DIY TWS speaker try to use a 6.5 sub to handle and produce that perfect bass punch and some 4 inch driver for midtone
Worth watching! Amazing work! Wish I had those skills! 😅
Tu taller a de estar muy chingon y muy actualizado 👌 salidos desde México y tú ingenio en hacer bocinas son lo máximo
người việt nam khéo tay,thông minh
Dude your hand work is outstanding! ✌️
Thank you for sharing your content and your passion.
I love you for doing what you love and for the passion you put forth in your life
I must say I really like this masterpiece do you have plans and measurements on this design? So I could do one just like it really like the quality of the build and the speaker quality is excellent. The type of wood that you have chosen and the epoxy blue really makes it pop.
What nationality are you and where do you live? Your craftsmanship is another level, appreciate the works of a perfectionist like you. It's just not creativity, it also shows hard work, precision skills, consistency and discipline.
i was a little high of weed, but this was like watching real magic happening
Thank you!
@@KingMinhvuong DYb
@@imrangujjar3247 y6y6g ggggggggg66tggtgggggggggggggggggtggggggggggggggggggggggggtggggggggg
@@KingMinhvuong "
great build - love the wireless chargers
Thank you!
Brother you are an artist from another planet. Keep it up!
Thank you!
This is really Master piece
A true example of what a mind can do
I would like to buy it if possible.pls tell
Sorry. I don't make for sale. You can buy materials in description of video to build one. Thank you!
@@KingMinhvuong what about cost?
Really awesome build, watched the entire video couldn't look away it was addictive! Kinda hurt my feelings a tiny bit because the blue epoxy wasn't translucent and lighted.
u
When you master your work professionally, it will be a beautiful memory
Thank you!
chapeau au Maestro de la bricole, beau travail, belle finition et un très bon descritif .trop cool !!!!
Thank you!
AWESOME DOING
You finally gave me an idea to home made my own Speaker.. best of the rest...
This guy works like a machine so precise and accurate. It's so beautiful just watching you work.
Excelente, não adiantei um só segundo, atento a cada detalhe. 👏🏼
L
Lp
Lp
0
I cannot applaud you enough, or give you enough thumbs up. I am astonished, truly. The best 49:23 💙💙💙 Subscribed 👍🏾💙
One of the best how too videos I have seen. 👍🏻💯🎶🎶🎶.
Thank you!
Uns dos meus planos é abrir uma empresa de construção de caixas personalizadas, igual você faz, muito top man, parabéns pelo trabalho
Thank you so much!
@@KingMinhvuong Wou, I didn't think you would answer, thanks!
Naprawdę cudowna robota👏👍😍
Very Nice!! Be cool to add a light inside to make the dovetails glow.
Parabéns uma bela obra de arte, sem palavras!
I really like the product you made, it's amazing and I'm interested in buying it can I have it?
Sorry! I don't make for sale. You can buy materials in description of video to build one. Good luck to you!
What a satisfying art 😍
This is incredible. Absolutely beautiful job.
Best one I've seen yet, and that's saying something.
Hey man, great video. Awesome piece of kit. The sped up footage/sound of the things like the router makes for ear bleed material. Maybe mess with the EQ in the mix
Haber como me queda, uno que solo cuenta con martillo, taladro y segueta, 🤷♂️.
Saludos y excelente video
y tenes bastante, mejor lo compro echo
Since 8 months i'm waiting till he drops a new video😍 cant wait to see his new project
Thank you!
good job, your bluetooth woofer is too classy, how much could it cost if i want one at home? i'm in africa.
wowww... Hola King Minhvuong como siempre amigo haciendo proyectos espectaculares felicitaciones. que buen speaker. Saludos desde COLOMBIA
Dem seeing all the details currently done it's like I wanna be there vibing to every part of the making process great Job I just subscribed 🎵🎵🎶🎶🎶🎼🎼👌👌
Thank you!
Супер Wi-Fi, просто класс и высший, и столярка и электроника.
Man this is amazing! sure wish there were some plans or even dimensions to go along with this. id love to have a speaker like this
Highest end construction detail. I love the stand and the wireless charger. Not sure about the choice of drivers, especially since everything else is so high end. Very instructional video. I like the colored epoxy but in small areas of detail only. Love your logo in it, not a huge fan of the dovetails but its all good. This is an amazing piece and I would love to hear it in person.
Iiiii
Iii oo
Iiiiii
I iiii
I iiiii
Well done sir.. It's looking so beautiful, thank you and appreciate your hard work. Can I buy this one? I really want this type of customize speaker with wireless charger.. Please reply me ..
Same to same
ന്ത
ക്കു
Me too want to buy it
Plz deliver it to Varansi UP INDIA.
一
Tbh it’s like he’s rushing it, I know it looks good but a bit more focus and it wood look amazing. Idk maybe I’m just mean. Going to check out some more of his stuff.
Hahahahaha.... I hope you're fucking kidding!
Wtf, wheres yours
Высокотехнологичная музыкальная "табуретка"! неплохо неплохо!
I stay with mothers, a question. What are the names of the songs that you put with bluetooth?
Ok.. I thought this was a video about making a table... No no no...
This is a video of someone just showing off...
Well played sir
Muy hermoso!!!
El mejor... Yo súper impresionado...