TIP for the light... if you leave an extra nut on the screw and then cut the screw to size, you can back the nut off and it will remove the burrs and keep the thread where it needs to be.
i would recommend leveling out the area around/under the rack if you plan to do squats/deadlifts/olympic-lifts, a slight side-slope can cause issues when you move close to your max load
I have the same branded set, different components in the kit. They are really nice addition to the garage. I bought them pre Covid, and back then the price was a steal on a sale through Hone Depot. Recently I wanted to add another single piece to my garage and couldn’t believe that the price nearly doubled from what I paid two years ago.
High quality linesman pliers or wire cutters will have a cutter for trimming long electrical screws. I use knipex 13 72 8 wire stripper, no need to bring out the grinder. Great transformation! Mind if I ask how much the professional floor coating cost? I would also like to do that
Good tip on the pliers! I always forget about that function. And thank you! The epoxy floor cost about $3k give or take. I think it’s well worth it and I would steer clear of the diy kits as they tend not to have the same durability
Before i Cut a screw or bolt down i thread a nut on past the point of the cut, then after i cut i remove the nut and the nut natrually folds the burr down and then you dont need to worry about it.
I was driving myself crazy because I couldn't find anyone who hung the cabinets how I imagined. So, I just received my husky cabinet set (same as yours, regular duty welded) and I really wanted to hang them off the floor because I have the same protruding stem wall. How are they holding up, do you store anything heavy in them? Did you hit two studs in each cabinet on top or only one? Did you also secure on the bottom or just resting on the cement? Hoping to install mine this week, thank you!
They are holding up great! All the cabinets are full but I don't put anything extremely heaving in them. I made sure to hit 2 studs per cabinet. 1 stud would probably worry me a bit. There are no holes to screw them in at the bottom so they are just resting on the concrete, but it hasn't been an issue. Worst case scenario, you can add feet to front. hope that helps!
*I really like the flooring. Your garage setup is awesome. I hope its been working our great for your needs! I'm about to start working on mine soon . I have been looking for design inspiration!*
Nice work! Did you replace the fridge or paint it black? I'd definitely hang the TV on the wall and replace the plastic shelf with a black metal one. Lastly, consider a shed for the wood materials.
Thank you! I ordered Husky cabinets - they are linked in the description. And yes, that's a Craftsman Tool Box. I really like and had it for years. Has held up really well!
We have a very large driveway. But 2 cars can still fit in the garage as the worktables can be moved to the side and the squat rack folds against the wall
Careful. I broke my garage floor… even though I had gym flooring (thick rubber mats) and bumper plates. And my bumper plates were the really thick ones, I think that’s the rogue competition set which is thinner (less surface area means more damage it can do). It first started cracking then where I would always deadlift it dug a hole. I never noticed because it was covered by the mats. I didn’t notice until I walked over it and it felt dug out. In hindsight, I would use rubber mats and a layer of thick plywood (1 3/4) on top of the mat.
Regarding the tall husky cabinet’s, did you get lucky and where able to screw them center to a stud? And did you use the prefixed holes or cut your own through the back of the cabinet?
I was lucky enough to hit 2 studs per cabinet and I just used the predrilled holes in the cabinet. So far, they have been holding up great. Hope that helps!
@@GoldenKeyDesign Is there anything specific? I bought a power rack for $6k from Force USA but all the parts are laid out in my garage for few months now because I can't figure out which mats to get. Lots of RUclipsrs suggested horse mats, but that they would smell really bad and need to sit outside for weeks and weeks to get rid of it, but I didn't really think that made sense to me.
The squat rack is collapsible and the work table can be moved to fit 2 cars in the garage. We have a large driveway so we prefer keeping the garage open
Superb renovation! What sheen of paint (I tried to make out the cans, is it Benjamin Moore?) did you use on the walls? Do you still recommend that Graco Magnum X5 sprayer in terms of its ease of use and clean up? Did you spray the ceiling and the wall and if so, in what order and how to prevent overspray? Finally, if you had to do it all over again would you still paint the walls first before having the floor epoxied or do it the reverse order? I am greatly curious to know if the epoxying job makes a dusty mess all over the nice fresh walls. About to embark on a very similar journey in my garage, thanks!!
Next time the circle on your wire strippers that have numbers where is that connection point is you can thread the screw into the air and then cut off was not needed some thing you don’t have to re-grind it to make sure it’s stays threaded true
Not sure if someone has asked this yet, but how’s the “cleanliness” level on the gym side when you’re using the workshop side and you’re cutting wood & stuff. Does it get all over the gym side? I’m thinking of doing this and I do a lot of wood projects but just not sure if wood shavings would get all over the equipment
If you plan to cut wood inside the garage, you will probably need to hook dust collection. I mainly use the garage to store my tools and use the workbench on occasion. But I cut the majority of my wood in the driveway
I don’t park any in there at the moment since we have such a large driveway, but with the collapsible squat rack, you can fit one car with lots of extra space. If the workbench was on wheels I think I found fit 2 cars if needed. The idea was for the space to be adaptable which I think I achieved. Thanks for watching!
TIP for the light... if you leave an extra nut on the screw and then cut the screw to size, you can back the nut off and it will remove the burrs and keep the thread where it needs to be.
Great tip, thank you!
Cut the head off the screw on the back side of bracket after you unscrew it to the proper length.
Such a nice end result, that is some fine work mate.
Glad you enjoyed it - thanks!!
Exactly what I was looking for, a garage gym with space for wood work/working on the cars! Thanks for sharing your build/garage makeover
Thank you, I'm glad you enjoyed it! Thanks for watching!
At today’s prices, you are now a rich man with that saved lumber :-)
I know! I’m glad I’ve kept all of it! It’s so hard to throw it away
Your house is coming together. The exterior house color goes well with your style!
I think so too!
Looks good. It feels better when you do it yourself.
Labor of love.
Professional quality
I’m so happy for you.
Thank you for sharing.
Love the Rogue stuff. Wheels on your weight tree never seem that. Innovative
Thanks! Rogue rack is great and having the tree on wheels make it so much easier when moving things around
i would recommend leveling out the area around/under the rack if you plan to do squats/deadlifts/olympic-lifts, a slight side-slope can cause issues when you move close to your max load
Good tip! Thanks!
Well done. I'm almost sold on the cabinets. Color choice on the house was very nice. Very sharp finish.
Thank you, appreciate it! I say buy the cabinets - they’ve been great 😁
Great video composition, appreciated the clear explanation of your efforts, and approved all the aesthetic and material choices you made.
Damn this is like the manliest thing ever 💪🏾💪🏾
I have the same branded set, different components in the kit. They are really nice addition to the garage. I bought them pre Covid, and back then the price was a steal on a sale through Hone Depot. Recently I wanted to add another single piece to my garage and couldn’t believe that the price nearly doubled from what I paid two years ago.
Great minds think alike haha! They are awesome cabinets and I was surprised they looked so good! That's crazy it's nearly doubled in price
I just want to clean up the garage.......
Leave the nut screwed in when you cut a stud. It cleans the threads when you back it out.
Great tip, thanks!
Nicely done man! As a garage gym-er and DIYer myself, this is an excellent blend of space.
Thank you! I love having both my hobbies in one space. Just need an extra bay for a car haha!
For the lights. Most of those bolts are a 8/32 bolt. Most strippers have screw holes for them. Screw them in and cut to length
That new colour on the exteriour is seeeexxyyyyyyyy! Fun fact: we basically have the same setup and smiliar choices for machines :D
When cutting threaded rod I always thread the nuts on passed where I’m cutting. Then you can take them off and you don’t need to clean up the burs.
Great tip!
This turned out fantastic!
Thank you! Really happy with the end result 😁
Nice job - have you thought about painting the refrigerator black? Easy DIY -
Thank you! I didn’t think of that, but that’s a great idea!
More LED strips will definitely make the garage look like a showroom
High quality linesman pliers or wire cutters will have a cutter for trimming long electrical screws. I use knipex 13 72 8 wire stripper, no need to bring out the grinder. Great transformation! Mind if I ask how much the professional floor coating cost? I would also like to do that
Good tip on the pliers! I always forget about that function. And thank you! The epoxy floor cost about $3k give or take. I think it’s well worth it and I would steer clear of the diy kits as they tend not to have the same durability
Bandsaw makes cutting threaded pipe/ bolts super easy
Yes they do! Still working my way to purchasing one🤞 thanks for watching!
Very nice outcome
Thank you!
Before i Cut a screw or bolt down i thread a nut on past the point of the cut, then after i cut i remove the nut and the nut natrually folds the burr down and then you dont need to worry about it.
Great tip! Thanks 😊
Congrats dude.. THAT LOOKS AMAZING.. driveway looks awesome and the gym its what I need :)... good taste!
Turned out great! I love your choice of lights, same one's my brother and I went with.
Thank you! The lights are awesome!
aw great work man
Wow, what a huge difference! Great Job! Which is the home gym in the corner? Thanks, Candy
Thanks for watching! The cable machine in the corner is by Body Solid. We bought it at a local gym equipment retailer. Works great!
Awesome transformation! What cable machine gym is that?
Thank you! the cable machine is from Body Solid. We bought it from a local gym equipment wholesaler.
Great upgrades. I love it!!
Looks really good man
Thank you so much 😊
Now that's an awesome transformation!
Thank you 😁
Nicely done, good work.
Thank you very much!
Amazing turnout! What are the garage dimensions?
Amazing transformation. What was your total spend here for the inside of the garage?
Thanks! I would say roughly $5k
I was driving myself crazy because I couldn't find anyone who hung the cabinets how I imagined.
So, I just received my husky cabinet set (same as yours, regular duty welded) and I really wanted to hang them off the floor because I have the same protruding stem wall. How are they holding up, do you store anything heavy in them? Did you hit two studs in each cabinet on top or only one? Did you also secure on the bottom or just resting on the cement? Hoping to install mine this week, thank you!
?
They are holding up great! All the cabinets are full but I don't put anything extremely heaving in them. I made sure to hit 2 studs per cabinet. 1 stud would probably worry me a bit. There are no holes to screw them in at the bottom so they are just resting on the concrete, but it hasn't been an issue. Worst case scenario, you can add feet to front. hope that helps!
Excellent job
Thank you very much!
Wow ! Awesome job, looks great!
Nice job guys.
Thank you, appreciate it!
Great job!! Best regards from Norway
Thank you!
Dude you nail it every time
*I really like the flooring. Your garage setup is awesome. I hope its been working our great for your needs! I'm about to start working on mine soon . I have been looking for design inspiration!*
Thank you so much! Good luck with your project!
What were the black cabinets? Are those the husky heavy duty or regular duty? Just curious as I just Installed heavy duty in my garage.
These ones are the regular duty. I linked them in the description. What features do the heavy duty ones have?
@@GoldenKeyDesign textured matte black finish, and the tall cabinets have 2 shelfs and 1 pullout drawer.
Nice work! Did you replace the fridge or paint it black? I'd definitely hang the TV on the wall and replace the plastic shelf with a black metal one. Lastly, consider a shed for the wood materials.
I need a place for gym, place to smoke, and maybe some gaming and ofcourse store all my tools
Home Gym ftw
💪
Awesome job! What type of cabinets did you order and is that a Craftsman tool storage unit? How do you like it?
Thank you! I ordered Husky cabinets - they are linked in the description. And yes, that's a Craftsman Tool Box. I really like and had it for years. Has held up really well!
Thanks for the cheat code on the garage lights
Of course haha! They work great!
Did the cabinets come already assembled like I see?? That's rare..
Did it come with the French cleat option already?
Where did you get those black floating cabinets?
They are husky cabinets from Home Depot
Good job dude
Thank you, I appreciate it!
Does no one park their vehicles in the garage anymore!?
We have a very large driveway. But 2 cars can still fit in the garage as the worktables can be moved to the side and the squat rack folds against the wall
Not if you want to turn your garage into a more useful space.
@@triploc87 leave the 76,000 dollar truck outside lol. Nice idea
Light screws...alot of wire strippers have a spot to thread the screws in and cut them as well.
Thanks for the tip!
Careful. I broke my garage floor… even though I had gym flooring (thick rubber mats) and bumper plates. And my bumper plates were the really thick ones, I think that’s the rogue competition set which is thinner (less surface area means more damage it can do). It first started cracking then where I would always deadlift it dug a hole. I never noticed because it was covered by the mats. I didn’t notice until I walked over it and it felt dug out. In hindsight, I would use rubber mats and a layer of thick plywood (1 3/4) on top of the mat.
Nice 👌 What was the cost of the commercial epoxy?
It was around $3k but well worth it in my opinion to have it done right
Great job
Thank you 😊
Regarding the tall husky cabinet’s, did you get lucky and where able to screw them center to a stud? And did you use the prefixed holes or cut your own through the back of the cabinet?
I was lucky enough to hit 2 studs per cabinet and I just used the predrilled holes in the cabinet. So far, they have been holding up great. Hope that helps!
Awesome bro👌🏻, congrats. I wish I have enough $ 2 b doing all of those renovation
Thank you! Hopefully you can live vicariously through my videos 😅
Looks amazing
Thank you!
The Music i love it what are they called?😊
They are all royalty free songs in the RUclips music library 😁
How much did they charge to do the floor?
I believe it was around $3k
Great job man!!
You definitely need to find a way to hang all of the wood above everything and section it when you need it
Put the nut on the bolt wind down past where your going to cut then you wind off cleaning thread
Great tip!
What type of flooring is that for the gym area?
Just some rubber mats
@@GoldenKeyDesign Is there anything specific? I bought a power rack for $6k from Force USA but all the parts are laid out in my garage for few months now because I can't figure out which mats to get. Lots of RUclipsrs suggested horse mats, but that they would smell really bad and need to sit outside for weeks and weeks to get rid of it, but I didn't really think that made sense to me.
@@ShinuriGaming I don't recall the brand but we bought them from a fitness equipment store. They are each about 4'x6' and lock together at the edges
Great presentation! Mind sharing the dimensions of your garage? I’m going to attempt to mimic something similar to what you have. Thank you!
Thank you! The garage is 20x20
@@GoldenKeyDesign awesome thanks for the reply I’ve got the same size!
What is the brand of the functional trainer you got?
It’s from Body Solid
Dope upgrades!
Appreciate it, thanks!
Where you put your junk at ?
In the cabinets 😂
thanks for posting great video
Glad you enjoyed it!
What kind of cabinets are those
They are husky cabinets and are linked in the description 😁
@@GoldenKeyDesign thank you. Trying to upgrade my garage.
so where do you park your cars?
The squat rack is collapsible and the work table can be moved to fit 2 cars in the garage. We have a large driveway so we prefer keeping the garage open
Nice job!
How much was the weights, dumbbells, etc ?
The dumbbells we have had for years so I’m not sure on that. But the plates were about $2/3 a pound
Superb renovation! What sheen of paint (I tried to make out the cans, is it Benjamin Moore?) did you use on the walls? Do you still recommend that Graco Magnum X5 sprayer in terms of its ease of use and clean up? Did you spray the ceiling and the wall and if so, in what order and how to prevent overspray? Finally, if you had to do it all over again would you still paint the walls first before having the floor epoxied or do it the reverse order? I am greatly curious to know if the epoxying job makes a dusty mess all over the nice fresh walls. About to embark on a very similar journey in my garage, thanks!!
What happened to the motorcycle?
Still have it, don’t worry haha
Please tell me you kept your Ducati.
Next time the circle on your wire strippers that have numbers where is that connection point is you can thread the screw into the air and then cut off was not needed some thing you don’t have to re-grind it to make sure it’s stays threaded true
Great tip, thank you!
What was the name of those matte black cabinets?
What cable machine did you purchase?
It’s from Body Solid. I really like it, but wish it was a little taller. But it’s a great machine for a garage gym
What make is the black workshop cabinets you use?
They are Husky cabinets. Link is in the description.
What type or brand of the matt floor that you used for the gym?
Nice work
How much did it cost for the epoxy?
Amazing transformation! 👏
Epic squat rack! 💪🏼
What brand cable system did you go with??
Thank you! Cable system is by Body Solid. We got it from a local fitness wholesaler. Works great!
is your garage sloped? how do you manage it/deal with it if so?
man! American switches look so funny compared to the UK 🇬🇧 😂but nice content 👍
😂 Thank you!
Not sure if someone has asked this yet, but how’s the “cleanliness” level on the gym side when you’re using the workshop side and you’re cutting wood & stuff. Does it get all over the gym side? I’m thinking of doing this and I do a lot of wood projects but just not sure if wood shavings would get all over the equipment
If you plan to cut wood inside the garage, you will probably need to hook dust collection. I mainly use the garage to store my tools and use the workbench on occasion. But I cut the majority of my wood in the driveway
@@GoldenKeyDesign oh I see, thanks for the reply
Clean 🦾
Thank you!
What state you live? MN?
Nope, IL
What brand are those cabinets?
Beast
Thanks!
where do you park your cars?....
I don’t park any in there at the moment since we have such a large driveway, but with the collapsible squat rack, you can fit one car with lots of extra space. If the workbench was on wheels I think I found fit 2 cars if needed. The idea was for the space to be adaptable which I think I achieved. Thanks for watching!
Where did the Ducati go!?
Great eye! It’s still here, don’t worry 😉 Excited for the weather to warm up to take her out for a spin!
how big is your garage?
It's a standard 2 car garage. About 20 feet wide and 20 feet deep
@@GoldenKeyDesign thank you!! so about 6 x 6 mts if anyone not in imperial system :)
Offer this house to me!!!! ❤
Haha! I wish!
What kind of level is that? It looks like it just sticks to the wall.
Would of updated the center light on the second floor to match the two next to the garage. It looks great. Congratulations 🎉
Thank you and good eye! We do plan to update that as well, just didn’t have time to fit in this video
awesome~!
Thank you!