Thanks you for this video. Yesterday I have cleaned my fuel injector after watching your video carefully. The most hard part was to take the fuel injector out from the car. After this things were much simpler. I buy a 5cc syringe from the pharmacy and cut the far end of it. Then I took the o ring from the injector inlet and push tight the injector into the syringe. I fill the syringe with the carbon removal fluid, which I buy it from a local auto store, and put the the syringe push piston inside. I took two alligator type wire and hooks the end into injector electric point. I connect the wire to car battery, to open the injector valve, and push the syringe piston. the injector start throughing fluid from other end, hence cleaning done. I did it with rest of 3 injecotor and put it back and car start in single self :-). One thing which I regret that I should have clearned but passing the fluid from other side as I feel that it will clean the injector throughly. Two of my car injectors, out of four, were not working but after doing this few of the injector nozzles open. SO if I do it both ways may be all of them open. May be next time when car give me injector problem :-)
Good evening you are actually a teacher in cleaning the sprays is very sweet and very very very easy way to clean the sprays but in a note now cleaning sprays need to change the filter sprays is better and not for the sprayer 👌👌👌
This is exactly how I cleaned and fixed an open injector. I had 6, cleaned them all and the last one was stuck open causing issues, I managed to fix it and close it using this method. I had actually purchased one of those kits on ebay with the battery contacts and piece to put the injectors into, used a 9 volt battery and carb cleaner. The ones I have are genuine Chrysler ones for my Jeep, they are impossible to get now (I live in Australia), and the replacement ones are no good. Good as new now.
So your suggestion is to force the debris into and through the injector nozzles, not push the debris out by pressurizing backwards. What if the debris is bigger than the injector passage? Won't it get stuck and wedged into the injector? Yours is one of the only videos that doesn't clean them backwards first. Just wondering why.
Thanks, this looks like a really good way of doing it. When I do mine, I'll probably use an air compressor to get more pressure in there. (But not too much!) Flushing with gas is completely unnecessary. The gas will flush them out for you when you hook everything back up. You can even run an engine on gumout.
Brilliant. I did something similar, except I actually used compressed air. You can see if the spray pattern is good and you can see it get better when cleaning a dirty injector. I use silicon spray on orings. Whatever you do, use some kind of lubricant on them so they stay seated during installation.
Are there any safer ways of doing this? I don't really consider gasoline (even small amounts) and the possibility of sparks from the 9V battery a good combination. Looks like you did it no problem though. Stay safe!
I really wish youtubers would stop caring what people give you shit about in the comments. Don’t even give them the satisfaction of mentioning their issue, let them freaking worry themselves to death about why your using that product straight in the injectors. Just like the gun guys, they always mention That they’ve cleared the weapon and its checked twice and it’s totally safe. Who gives a shit, it ain’t going to shoot you through the damn video, if the guy survived to post the video, then he don’t need you to armchair quarterback his work.
I cleaned the injectors and the throttle body on my toyota tercel the same way as you but when i put everything back together it idle over 1000 rpm as before it was close to 800 rpm what could i have done wrong for it to do that ?
Instead of using lube..Kilmer says to 'dip the head side o-ring in gasoline before inserting them, then they won't leak'...can anyone comment if this sounds ok? thx
I drove a Saturn throughout high school (No car payment, easy to work on, good gas mileage), while saving for my Cuda. Was able to pay cash for the Cuda, and still have the Saturn for winter driving! Don't hate on Saturns!
If the only car you had and could only afford was a saturn and no money for a different car would you say "all that for a saturn"? Gotta do what you gotta do to keep your wheels running.
You may have forgot to say a few things in your video... 1. need to tell some of the FREAKING IDIOTS out there not to SUCK on the fuel injectors! 2. Then lastly you are not responsible for them blowing up their cars/houses. LOL
So you have very flammable fuel that you also make in aerosol form and then you have a battery which can cause a spark. I think you haven't thought this through very well. Usually, a carb cleaner is used or a brake cleaner but this cleaner is not flammable. But really, fuel and a battery and getting your face up there, sounds like you could end up with severe burns all over your face if you get the wrong situation or just a small spark.
@@JB-qu7gp no no that is not the best comment ever it is never good to call anybody to douche either be positive or don't take to making comments cuz you got nothing else to do.
Seriously? Then use a longer tube. All you idiots with no ability to think for yourselves. It's a good idea and if you're afraid, change that you think is dangerous. Sounds like you're using YT instead of reasoning skills.
Thanks you for this video. Yesterday I have cleaned my fuel injector after watching your video carefully. The most hard part was to take the fuel injector out from the car. After this things were much simpler. I buy a 5cc syringe from the pharmacy and cut the far end of it. Then I took the o ring from the injector inlet and push tight the injector into the syringe. I fill the syringe with the carbon removal fluid, which I buy it from a local auto store, and put the the syringe push piston inside. I took two alligator type wire and hooks the end into injector electric point. I connect the wire to car battery, to open the injector valve, and push the syringe piston. the injector start throughing fluid from other end, hence cleaning done. I did it with rest of 3 injecotor and put it back and car start in single self :-). One thing which I regret that I should have clearned but passing the fluid from other side as I feel that it will clean the injector throughly. Two of my car injectors, out of four, were not working but after doing this few of the injector nozzles open. SO if I do it both ways may be all of them open. May be next time when car give me injector problem :-)
Good evening you are actually a teacher in cleaning the sprays is very sweet and very very very easy way to clean the sprays but in a note now cleaning sprays need to change the filter sprays is better and not for the sprayer 👌👌👌
This is exactly how I cleaned and fixed an open injector. I had 6, cleaned them all and the last one was stuck open causing issues, I managed to fix it and close it using this method. I had actually purchased one of those kits on ebay with the battery contacts and piece to put the injectors into, used a 9 volt battery and carb cleaner. The ones I have are genuine Chrysler ones for my Jeep, they are impossible to get now (I live in Australia), and the replacement ones are no good. Good as new now.
I Like it!!, I use all the 'PRO' stuff and at times I do the bojang stuff too, It works!
Great Presentation!
So your suggestion is to force the debris into and through the injector nozzles, not push the debris out by pressurizing backwards. What if the debris is bigger than the injector passage? Won't it get stuck and wedged into the injector? Yours is one of the only videos that doesn't clean them backwards first. Just wondering why.
Right! Back flush first.
been looking for video for an easy alternative way to check each fuel injector when u dont have the proper tools..going to be trying this..ty
Love it! Simple, straight forward and easy to do. Works for me!
Thanks, this looks like a really good way of doing it. When I do mine, I'll probably use an air compressor to get more pressure in there. (But not too much!) Flushing with gas is completely unnecessary. The gas will flush them out for you when you hook everything back up. You can even run an engine on gumout.
Thank you sir! Imma bout to clean my injectors soon and was wondering if a 9v battery would work
Fantastic job!!! Results of monshine effects!!!
that's correct most people have only two hands
Thanks so much! I've got a rough idle I'm going to try this method this weekend!
Brilliant. I did something similar, except I actually used compressed air. You can see if the spray pattern is good and you can see it get better when cleaning a dirty injector.
I use silicon spray on orings. Whatever you do, use some kind of lubricant on them so they stay seated during installation.
Great low buck solution! Thanks for the great video!
Are there any safer ways of doing this? I don't really consider gasoline (even small amounts) and the possibility of sparks from the 9V battery a good combination. Looks like you did it no problem though. Stay safe!
My kind of Work...simple , easy and effective.
Good job. A plastic bottle that is squeezable is another way to build pressure.
Nice man. I cant wait to see you first drive it. Keep up the good work!
it lacks pressure but sure the 9v battery is a good idea ! tks
very simple, thanks for sharing the info.
I really wish youtubers would stop caring what people give you shit about in the comments. Don’t even give them the satisfaction of mentioning their issue, let them freaking worry themselves to death about why your using that product straight in the injectors. Just like the gun guys, they always mention That they’ve cleared the weapon and its checked twice and it’s totally safe. Who gives a shit, it ain’t going to shoot you through the damn video, if the guy survived to post the video, then he don’t need you to armchair quarterback his work.
Sounds like you tasted it lol great video though. I'm on a low low budget and this will save me a bit. Thank you...
Can we connect battery Negative and positive charge terminals to injector randomly. Does injector will work or it blow off ?? Please do reply
Refueled And Boosted you can but just remember to connect only one terminal to the battery and tap the other one quickly
What would be the case if you hear the click but nothing comes out
What did u use to lube up the orings
Good idea with the 9 volt, thanks. And I too only have two hands ... lol
saturn injectors? :3
Love it ! Nothing much wrong with that
"most people only have two hands" hahaha
My thoughts aswell
does the battery polarity matter when connecting to the injector?
Nope, either way activates the injector.
I've seen Chemtool turn a blue fuel funnel, white due to the ingredients in it.
What is a month to month lease?
I cleaned the injectors and the throttle body on my toyota tercel the same way as you but when i put everything back together it idle over 1000 rpm as before it was close to 800 rpm what could i have done wrong for it to do that ?
Vacuum line hose
simple, nice and easy... thanks
Neat trick, quick and effective.
how did he took the car apart from the car
Easy and beautiful lol!
Im going to do just this thanks
Gracias
Quote of the day: "Most people only have two hands" 😊
great job thanks
You sounded a bit different after blowing on the injector :)
Instead of using lube..Kilmer says to 'dip the head side o-ring in gasoline before inserting them, then they won't leak'...can anyone comment if this sounds ok? thx
Ford says use clean motor oil.
“Most people only have two hands”.. I wanna meet the person who has more than two hands!
all this for a *Saturn* ? .................. a Saturn
I drove a Saturn throughout high school (No car payment, easy to work on, good gas mileage), while saving for my Cuda. Was able to pay cash for the Cuda, and still have the Saturn for winter driving! Don't hate on Saturns!
Yea i got a saturn,saturn redline supercharged good car
If the only car you had and could only afford was a saturn and no money for a different car would you say "all that for a saturn"?
Gotta do what you gotta do to keep your wheels running.
Thanks homy
You may have forgot to say a few things in your video... 1. need to tell some of the FREAKING IDIOTS out there not to SUCK on the fuel injectors! 2. Then lastly you are not responsible for them blowing up their cars/houses. LOL
Hi my car if you drive is backfire i change coilpak purkpak and petrol pump but steel mike semiting please guys
So you have very flammable fuel that you also make in aerosol form and then you have a battery which can cause a spark. I think you haven't thought this through very well. Usually, a carb cleaner is used or a brake cleaner but this cleaner is not flammable. But really, fuel and a battery and getting your face up there, sounds like you could end up with severe burns all over your face if you get the wrong situation or just a small spark.
Red Rum beat comment ever
@@JB-qu7gp no no that is not the best comment ever it is never good to call anybody to douche either be positive or don't take to making comments cuz you got nothing else to do.
Seriously? Then use a longer tube. All you idiots with no ability to think for yourselves. It's a good idea and if you're afraid, change that you think is dangerous. Sounds like you're using YT instead of reasoning skills.
I would use compressed air instead of blowing in them with my mouth.
A bullet? Please don't shoot them !!!
my motorcycle injector its not work with 9 volt battery 😞 it work with 12 volt battery
Yes they will.
What dat mouth do
are you the fire arm guy
that built a Ak 47 from scrap
+Hale Cooley the ammo channel
Hell... Yeah yeah you got so much pressure in your blowing lips. Just playing man thanks for the video I'm going to copy exactly how you did it
Nice
Hell Yeah!!!
THX :)
B-12 chemtol is way too harsh and will damage the inside if you don't install the injectors on the engine right after the cleaning.
What would you recommend instead?
I'm sorry, but anyone who thinks gas and 9volt batteries are an accident waiting to happen is seriously suffering in the IQ department.
you are lucky you did not light your hands and/or face on fire
lol i have actually done that. i had nitrile gloves on and i guess the fumes had gotten in there.
mantap
it good
Black screen. Don’t show much
dont set yourself on fire. jkjk
My god you guys are slow . It's common sense get to the point/