To anyone who buys this machine: DO NOT USE CHEMTOOL B12 OR ANY HARSH CHEMICAL FOR THE TESTING FLUID ON THIS MACHINE!!! It will EAT away at the internal plastic parts of the tubes and tank mechanism and destroy it. I learned this the hard way, and my man here on this video learned it quietly as well. This machine is intended to be used with Isopropyl Alcohol 91% or higher for the testing fluid, and a mix of water and ultrasonic cleaning agent for the bath. I contacted Autool about my machine’s demise, and luckily they sent me a replacement seal kit, tank, and fuel pump. I also had to replace a plastic tray that directs all the liquid into the tank. It was a nasty mess… Otherwise, this is a pretty nice machine, and Autool honors the 3 year warranty. Beware of the black gooey mess 😅
I go through vehicles a lot and do a lot of highway driving so fuel milage is a must for me so this comes in handy on making sure I’m getting the max out of my milage for sure
Use injector rehab ultrasonic cleaning fluid concentrate 10:1 makes 5 gallons & denatured alcohol for testing fluid. *mineral spirits is not recommended
Second test didn't show anything. You were getting up to 50, now you were getting up to 10. If before you had 6ml difference, now it's 5 times less. You cannot see it on that scale.
Awesome! My j35 bogged down to 500 rpm for 5 seconds after revving it in park to 3500. I d k what happened except my homemade additive was a fail even at 2 ounces. from a month ago tryin to add what diesel guys did lol
Guess ill stick with lucas for higher octane and to lubricate the upper cylinders since theres no sludge in that like mcd fryer oil I did try 2 ounces of clear oil straight out the jug as additive. Im guessing that must 've given everything a coating like lucas injector cleaner bc it was quite and lean even in lift
@@rstuff1605 bestline makes the best fuel cleaner I have ever used. I used it so much they reached out to sponsor me even! So I can pass the savings. Feel free to try it www.racingadditives.com and use code Dguy20 for 20% off! If your interested.
@@GlassWerx ok. And yes i did make a fail lol. It was an experiment that i realized coagulated fluids of filtered from store fryer oil is still sludgy especially after 2 years - maybe fine sediments sticking to it -
Dude! You just made me order one of these as I sit! Ha! I will be making a video about it later once it gets here. Killer video, really good job. Thank you.
Use redline fuel system cleaner . Works better then B12. B12 came in like last place when compared with redline and other brands. The redline works like right away within seconds. Only thing I get for my Z now
Yup that’s where this machine comes in handy you can clean them E85 injectors. Not all injectors can be cleaned though unfortunately. Some just crap out when they sit too long with E in them
You have got very nice children..Prayers for them from Pakistan. Learned a lot from your video, very helpful. I have just bought a Russian made injector cleaner with manual in Russian. Looking for a good video. Found your video after a lot of time waste.
What would you want to clean a set of injectors? My dad needs to replace the injector seals on his tacoma so might as well make sure they are cleaned and flowing well while they are out.
thanks for sharing your experience and detailed explanation of machine using. i have noticed these injectors are kehin does machine helped you know their flow rate. i have another machine but no way to measure the flow rate directly as the glass cylinders capacity only 1000 mm there is no flow rate selection on the machine only idle, high, low and leak test. how can i calculate the flow rate of unknown kehin injectors or any other injector, thanks again family man.
FYI, the CT160 does have a filter sock on the internal pump. The pump and cylinder drain are not sealed to the tank, so don't tip the machine over. I'm happy with mine. Just switched to no-odor mineral spirits, kerosene stinks! Don't use the "green" mineral spirits. I've discovered several amazon/ebay special injectors that were DOA.
Just bought the CT400. Appreciate the video! It was informative. I bought some cleaner liquid off Amazon and will probably use mineral spirits for testing just like you did
That is a very nice machine man and it's very very affordable I just have to see if it will save me money and make me money in the end to compensate for the affordability
Understandable. For me doing what I do the machine pays for itself in 5 injector cleaning. After that it’s just saving money for me. I usually pay $65 per 4 injectors to get cleaned normally. Lol 😂
Hi During clining injectors in autool mine were hot even i smelled somthing burning is it normal during ultrsonic cleaning or somthing is wrong with mine autool i have ct200 Thank u
Thats pretty cool tool. Definitely not cheap. Subbed to agn as well. He's got some cool cars on there. I'd love be able build up a nice engine for mine like some of the stuff he's got.
He is really good at what he does and thank you for that! Definitely not cheap by any means. I didn’t have enough to get the injector basket removal tool and filters so I got just the machine. Been saving forever for one lol
@@TexasHondaChannel looks like what ya got was plenty. I saved up for a while then that stimulus hit n got my last parts for my car I been waiting lol. Now if I do anything else other then interior which I wana start doing soon. ALL custom fiberglass panels n headliner ect. I'd like to j swap it n convert to manual trans. While your giving out subs send them my way lol. Anyways. Good stuff ready to see what difference decapping injectors will do.
@@GlassWerx ours went to mostly paying bills and debts off now we are caught up which helps a lot but still scraping by but no longer in debt scraping by is a way different type of scraping by.
@@TexasHondaChannel yeah we did the same thing with ours. Paid bills n got caught up. Used chuck of taxes not stimulus idk why thought it was other way around. Either way I got my goodies lol and were caught up on bills.
Unfortunately I went ahead and pulled the trigger I bought me one and I'll have it on my birthday on Tuesday I ended up getting the six cylinder one cuz I deal with a lot of v6s
after cleaning result is not good compare to before test, cause you used different program. You should run same program before and after cleaning. Then you see real difference.
Hey cool vid !! I just started watching your Channel, because I just bought a 2003 3.2 TL and It has 138000 on it and it drives like new. Lot's of Power. Plus you cant even hear the motor when its running unless i have the gas on and Vtec kickin The 85 year old lady I bought from had it religious serviced at the dealer. and she did not rag on it. from what I understand is that these cars from Honda/ Acura are built better than most. and I would like to try to Pickup the Odyssey Intake and send you my injectors for cleaning,(Name your Price)Flat rate US POSTAL. You really seem to know what your talking about. where do you find this info about these cars? Very impressive work you have Done , I am Fan boy. God Bless An be well. Thanks for sharing, I'm learning alot from you!!
Thanks for this video! It answers a lot of my questions prior to making this purchase. Some questions: I’m guessing the mineral spirits is just for testing, acting like a tank full of gas basically, correct? Are there any other chemicals that can be used that won’t harm injectors and parts? Is the mineral spirits a one time use and throw away deal? Do you throw away as it gets dirty? For the actual ultrasonic cleaning solution, any other recommended chemicals? I’ve seen folks use carb cleaner, or even the pour in tank style chemicals. What are other options? Thanks again!
You need to tell everyone if they don’t use the right cleaning fluid that B12 or any other fuel cleaner from the parts house will eat the heat shrink off the wires and then they will start touching cutting the machine off
Привет ,у меня вопросы и их очень много к автору ролика первое пожалуйста поставьте перевод субтитры с английского на русский я приобрёл такой же аппарат но не могу пока разобраться !!!
Friend, thanks for your explanation, I have a question, can I only clean and test petrol injectors with this? or can I also use diesel injectors and are there certain brands that can and cannot be tested?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
To anyone who buys this machine: DO NOT USE CHEMTOOL B12 OR ANY HARSH CHEMICAL FOR THE TESTING FLUID ON THIS MACHINE!!! It will EAT away at the internal plastic parts of the tubes and tank mechanism and destroy it. I learned this the hard way, and my man here on this video learned it quietly as well. This machine is intended to be used with Isopropyl Alcohol 91% or higher for the testing fluid, and a mix of water and ultrasonic cleaning agent for the bath. I contacted Autool about my machine’s demise, and luckily they sent me a replacement seal kit, tank, and fuel pump. I also had to replace a plastic tray that directs all the liquid into the tank. It was a nasty mess… Otherwise, this is a pretty nice machine, and Autool honors the 3 year warranty. Beware of the black gooey mess 😅
It says so in the manual by the way, but thanks for the heads up!
Can I use Isopropyl alcohol
@@AnthGott, yes, autool recommends in the manual to use isopropyl alcohol to not damage the plastic parts. worked for me.
@@joeybee2675 thanks I have some of that. Should I add any distilled water?
@@AnthGott i guess you could do it, i used 1,5 L pure alcohol instead.
Definitely need to invest in that, with myself and the kids we have 20 vehicles all together and only adding more,
I go through vehicles a lot and do a lot of highway driving so fuel milage is a must for me so this comes in handy on making sure I’m getting the max out of my milage for sure
I got the older version the ct150, chemtool will melt all the plastic off the machine, I would beware using them.
What solution do you recommend?
From my research diluted simple green
Use injector rehab ultrasonic cleaning fluid concentrate 10:1 makes 5 gallons & denatured alcohol for testing fluid.
*mineral spirits is not recommended
Second test didn't show anything. You were getting up to 50, now you were getting up to 10. If before you had 6ml difference, now it's 5 times less. You cannot see it on that scale.
Yeah other than a machine like this i tell all my customers to do a good distance drive and it'll work wonders👍
Any update @TexasHondaChannel ? Would love to know how it is operating 2 years later
Awesome! My j35 bogged down to 500 rpm for 5 seconds after revving it in park to 3500. I d k what happened except my homemade additive was a fail even at 2 ounces. from a month ago tryin to add what diesel guys did lol
Guess ill stick with lucas for higher octane and to lubricate the upper cylinders since theres no sludge in that like mcd fryer oil
I did try 2 ounces of clear oil straight out the jug as additive. Im guessing that must 've given everything a coating like lucas injector cleaner bc it was quite and lean even in lift
@@rstuff1605 bestline makes the best fuel cleaner I have ever used. I used it so much they reached out to sponsor me even! So I can pass the savings. Feel free to try it www.racingadditives.com and use code Dguy20 for 20% off! If your interested.
@@rstuff1605 check out his video on the lubricant test he did with that bestline. It was amazing results
@@GlassWerx ok. And yes i did make a fail lol. It was an experiment that i realized coagulated fluids of filtered from store fryer oil is still sludgy especially after 2 years - maybe fine sediments sticking to it -
@@rstuff1605 thats cool that you tried tho. Hopefully it didn't damage your engine. Keep trying never know what u can come up with.
How long or how many times can the mineral spirits be used for ?
Excellent video, thank you. I have a Beley FXM-4C it's just the same unit :)
i saw a new ct-500 or ct-800 one of the two and it had a way to test up to 8 fuel injectors at one time!
There are 2 types of Berryman's. One you put in the fuel tank, the other is concentrated for direct injection into the fuel injector.
Great demo I will be buying this year. Thanks!
Dude! You just made me order one of these as I sit! Ha! I will be making a video about it later once it gets here. Killer video, really good job. Thank you.
Still workin?
I have a po302 on my 2006 Subaru sti. Next stop fuel injector troubleshooting
Use redline fuel system cleaner . Works better then B12. B12 came in like last place when compared with redline and other brands. The redline works like right away within seconds. Only thing I get for my Z now
Also, to note with an injector cleaner, when you run E85, injectors tend not to flow the same if you let them sit for too long!
Yup that’s where this machine comes in handy you can clean them E85 injectors. Not all injectors can be cleaned though unfortunately. Some just crap out when they sit too long with E in them
I have the sdt 206 smoke machine. I cleared a po442 and 456 on my 2006 Subaru sti on hard to find hoses
When u said "decapped injectors" what are u refererring to and what are the advantages of this
They remove the screen of the injector tip. Makes the injector a little bigger
Hey bro have you had any leak problem using mineral spirits? I have read that it is too strong for the seal /o rings in the machine
Learning alot. So if you want to go FI you probably want to look at your injectors and transmission before slapping on anything.
Yea for sure. You wanna look at everything that would be a weak link.
You have got very nice children..Prayers for them from Pakistan. Learned a lot from your video, very helpful. I have just bought a Russian made injector cleaner with manual in Russian. Looking for a good video. Found your video after a lot of time waste.
What would you want to clean a set of injectors? My dad needs to replace the injector seals on his tacoma so might as well make sure they are cleaned and flowing well while they are out.
Message me on Instagram. 👀 people watch my channel that like to complain about things I do so message me man.
@@TexasHondaChannel I fully understand. No problem
@@TexasHondaChannel I fully understand. No problem
thanks for sharing your experience and detailed explanation of machine using. i have noticed these injectors are kehin does machine helped you know their flow rate. i have another machine but no way to measure the flow rate directly as the glass cylinders capacity only 1000 mm there is no flow rate selection on the machine only idle, high, low and leak test. how can i calculate the flow rate of unknown kehin injectors or any other injector, thanks again family man.
Thank you for sharing!! Looking forward getting myself one of these. But in 6 cylinders. I was skipical bout Autool reviews
This thing is awesome!
Does this do reverse flushing like CT150?
Como se drenas el líquido de pruebas?
lleva un deposito y cn la llave del medio entre los tubos abres el desahogo
FYI, the CT160 does have a filter sock on the internal pump. The pump and cylinder drain are not sealed to the tank, so don't tip the machine over. I'm happy with mine. Just switched to no-odor mineral spirits, kerosene stinks! Don't use the "green" mineral spirits. I've discovered several amazon/ebay special injectors that were DOA.
Hello, is this device only for petrol injectors or also for diesel?
Any updates on how this is holding up? Been wanting to get one
Just bought the CT400. Appreciate the video! It was informative. I bought some cleaner liquid off Amazon and will probably use mineral spirits for testing just like you did
Use denatured alcohol for testing mineral spirits is not recommended
That is a very nice machine man and it's very very affordable I just have to see if it will save me money and make me money in the end to compensate for the affordability
Understandable. For me doing what I do the machine pays for itself in 5 injector cleaning. After that it’s just saving money for me. I usually pay $65 per 4 injectors to get cleaned normally. Lol 😂
Where i can buy tester liquid and cleaner liquid
i use one of these at my work. for the tesrer liquid we use mineral spirits, for the cleaner we use simple green mixed with water.
Hi
During clining injectors in autool mine were hot even i smelled somthing burning is it normal during ultrsonic cleaning or somthing is wrong with mine autool i have ct200
Thank u
Most likely some wrong or it’s burning inside kinda a hit or miss sometimes they come broken as far as I know watching multiple reviews
Thats pretty cool tool. Definitely not cheap. Subbed to agn as well. He's got some cool cars on there. I'd love be able build up a nice engine for mine like some of the stuff he's got.
He is really good at what he does and thank you for that! Definitely not cheap by any means. I didn’t have enough to get the injector basket removal tool and filters so I got just the machine. Been saving forever for one lol
@@TexasHondaChannel looks like what ya got was plenty. I saved up for a while then that stimulus hit n got my last parts for my car I been waiting lol. Now if I do anything else other then interior which I wana start doing soon. ALL custom fiberglass panels n headliner ect. I'd like to j swap it n convert to manual trans. While your giving out subs send them my way lol. Anyways. Good stuff ready to see what difference decapping injectors will do.
@@GlassWerx ours went to mostly paying bills and debts off now we are caught up which helps a lot but still scraping by but no longer in debt scraping by is a way different type of scraping by.
@@TexasHondaChannel yeah we did the same thing with ours. Paid bills n got caught up. Used chuck of taxes not stimulus idk why thought it was other way around. Either way I got my goodies lol and were caught up on bills.
I want to get this injector cleaner tester as I saw it. It is so nice
i have ,dear.i am also the manufacturer of this machine
A friend query the machine autool ct 160 with how much voltage works 220 or 110v. I have doubts about burning my new machine
a normal house outlet.
Their website stated that its operating voltage is 110-230 v.
Where do you buy your replacement filters and o rings for your injectors.
Any parts store has them or can order
I’m planning on buying one and was wondering which one is worth the money!
Thanks for sharing
Definitely this one for sure! I love it! The link is in the description of the one I have!
Unfortunately I went ahead and pulled the trigger I bought me one and I'll have it on my birthday on Tuesday I ended up getting the six cylinder one cuz I deal with a lot of v6s
Awesome!!! You will love it!!
Is there a machine like it for diesel injectors?
after cleaning result is not good compare to before test, cause you used different program. You should run same program before and after cleaning. Then you see real difference.
Love your kids.
Really enjoyed this super informative video my friend!
Yeahh brother I have the same
One
What Kind of fluid do you use for cleaning and testing?
AUTOOL CT-160 Injector so how tou use on common rail injector ? AUTOOL CT-160 only for petrol injectors ?
I use berryman b-12 clean work great.
How much to clean my injectors
Hey cool vid !! I just started watching your Channel, because I just bought a 2003 3.2 TL and It has 138000 on it and it drives like new. Lot's of Power. Plus you cant even hear the motor when its running unless i have the gas on and Vtec kickin The 85 year old lady I bought from had it religious serviced at the dealer. and she did not rag on it. from what I understand is that these cars from Honda/ Acura are built better than most. and I would like to try to Pickup the Odyssey Intake and send you my injectors for cleaning,(Name your Price)Flat rate US POSTAL. You really seem to know what your talking about. where do you find this info about these cars? Very impressive work you have Done , I am Fan boy. God Bless An be well. Thanks for sharing, I'm learning alot from you!!
Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
hi can i use white spirit for testing?
Hey was wondering if you still have the machine and if it’s still working out great for you? Do you need any type of compressor to run it?
Great video man, im sold!
What cleaner do you need to use the heating function please?
CT-160
Amazing video, very insightful. Can u do the reverse method. I'm gonna get the CT200 One myself. U make it so easy to.learn once I get mine.
Lovely video man. Almost ordered the Autool CT150, but then I saw the CT160... So I assume the 160 is the new one. Will order one too. Cheers!
Me too. I think that CT150 is the same model, but without heating function.
Nice James 👍
Anybody have an issue when using the ultrasonic cleaning Method lights on the testing tube flickering on and off ?
Well explained bro…..
What are your thoughts on cleaning ID 1060s? Thanks for posting!
Why didn't you use the heat function?
Because he isn't using proper (water based) injector cleaning fluid. Not safe to hear flammable liquid.
@@ryancrisp6786what is the correct fluid to use? Anything I can buy from the store and not mix?
Awesome 👍
Is this company reliable and is it of high quality that can withstand the working conditions in the workshops? Please can you give me advice?
Great video thank you:
Good video though man I appreciate this!
Hell yea man that’s awesome
Thanks bro
Its now been a couple of years. How is the machine going and have you had any issues with it?
Most probably returned it a week later.
@@tsoukalloswhy?
Hey I’m looking into buying one of these. Do you still recommend? Any issues
this tool still holding up?
this is what brought me here and i'd look elsewhere, he's here to sell you shit thats all
Great video thank you:)
Thanks for this video! It answers a lot of my questions prior to making this purchase. Some questions: I’m guessing the mineral spirits is just for testing, acting like a tank full of gas basically, correct? Are there any other chemicals that can be used that won’t harm injectors and parts? Is the mineral spirits a one time use and throw away deal? Do you throw away as it gets dirty?
For the actual ultrasonic cleaning solution, any other recommended chemicals? I’ve seen folks use carb cleaner, or even the pour in tank style chemicals. What are other options? Thanks again!
injector rehab ultrasonic injectior cleaning concentrate 10:1 makes 5 gallons
Great video.
Good job
Привет из России!Полезное и нужное видео !Спасибо! руки в грязи, лицо в мыле ,я люблю автомобили )))
You need to tell everyone if they don’t use the right cleaning fluid that B12 or any other fuel cleaner from the parts house will eat the heat shrink off the wires and then they will start touching cutting the machine off
Nice tool
Need one for the shop and I would ask how reliable the tool is but its an affiliate sales link, he's here to make money
It’s good man my buddies have one at their shop I’m buying one myself
This will pay for itself in no time.
Got these injector cleaner for $130 bucks off Taobao, totally worth it
Which vendor? Best price I saw was 1788 Yaun.
does it need a compressor ?
No
COOL, many views and comments.
Can this clean side feed injectors ?
good Nice ❤
Yeah don’t use b12
What do you use?
Big 💖
I run a turbo j in my delsol. These engines are bad about carbon build up.
👍🏿👍🏿👍🏿👍🏿
Привет ,у меня вопросы и их очень много к автору ролика первое пожалуйста поставьте перевод субтитры с английского на русский я приобрёл такой же аппарат но не могу пока разобраться !!!
В ютубе есть автоматический перевод субтитров.
@@der_pinguin44 уже разобрался спасибо))
Friend, thanks for your explanation, I have a question, can I only clean and test petrol injectors with this? or can I also use diesel injectors and are there certain brands that can and cannot be tested?
There is no restriction on the brands that can be cleaned, but the interfaces are replaceable if tested.
i also got a cheaper machine than autool.if someone need ,you can contact me
What’s the name
@@karveemorrow6116 it's seems called SUMMARY GDI S4,I got the contact way of this sales,I purchase this machine from her