Installing R1 Concepts Brake Rotors & Pads On My 10th Gen Civic Si
HTML-код
- Опубликовано: 7 сен 2024
- IG: @elpinche97
Like, Share, & Subscribe for more videos!
Use code 'PINCHE10' for 10% off any product from the sponsorships below!
Lasfit Mats/LEDs: lddy.no/zhdt
Boslla Lighting: www.boslla.com...
Ultimate Motorsports: ultimatemotors...
Use My Referral Link To Purchase Your Car Parts from MAPerformance: rwrd.io/ug1qd5q?c
Outro Song: • Kid Cudi - Switchin La...
+Twitter+
ElPinche: / lasgproductionz
+Support The Other Channels+
ElPinche97 Gaming: / @lasg97elpinche
LASG Productionz (Music): / triplex1997
MC Indy (Gaming): / @indy7025
Thanks for supporting!
#10thgencivicsi #10thgencivic #2020civicsi
└ASG Productionz. 2021 ©
Excellent installation
Stainless steel lines will help a lot with the sponginess, from what I’ve heard.
Sponginess has been removed a lot just with this!!
For stainless steel brake lines don’t they require more maintenance?
@@ElPinche97 I’m not 100%. I’ve heard it’s not that difficult, especially for someone with the tools and patience to do the job.
Great video! Love the new set up, those rotors look good bro! I was looking at the R1 pads for my 2017 Si the other day. Definitely need to get those!!🔥
Definitely man!!
@@ElPinche97 how did you like them, looking into these !
Just hit that wheel well spot with some undercoating or better yet bedliner spray
I’ll look into that!
fire video keep grinding with the SI you’ve taught me alot about mine🤞
Hell yeah thank you man! 🙏🏽 glad to help !
Did you bleed it?
For 14 bucks you can by an impact screwdriver then wack it with a mallet
did you have to put it in maintenance mode or no ?
nope! not for the fronts. for the rears I believe you do
Yes only the rears there is a manual way to do it you have to disconnect the electrical harness to the e brake there two screws in the electronic e brake hub when you open that there is a spindle that you turn clockwise so it can retract the mechanical for the piston to be pushed in freely. I repeat Do not push the piston in without retract the mechanism within
From what I hear, you can just keep the e-brake disengaged and put it in gear and some wheel chocks.