Видео

@@P.D8249 I have heard some people tell me about hyper flash and everyone so far has contacted Morimoto for replacements. I know I had an issue with my V1s when I first got them and they sent out a replacement immediately.

@@ElPinche97 got it. Bro bought a resistor and came in yesterday i wonder if its better to just hook that up or replace the whole light.

Dont really wanna wait for the replacement at all. Just curious what color the turn signal is on the driver side do you know?

@@FC2Dani any springs may blow out your stock shocks due to their age. If you put springs on they may not blow until you hit 200k or until 160k. I’d suggest some less aggressive ones such as Skunk2 or Eibach. D2 is the most aggressive so it’ll be the most wear on your car.

@@ElPinche97 I see. Some people cut the yellow dampers, is that necessary? I want better handling without blowing tons of money for coils, I think d2 is the best choice but I’m not sure.

@@kylegentles2270 not necessary, they provide self tap screws if you don’t have the rivet tool. But I highly recommend the rivet tool. Incase you ever need to take it off for like the transmission fluid or clutch job, etc.

@@Gmelo17_6spds Fumoto Oil Drain Valve. Makes oil changes way easier and I don’t have to worry about the little gasket every time.

Thank you I’m going to look into it

@@Jcancel54 I did that on one side and it worked. It on the other side it didn’t so I had to splice it open a bit so that it makes contact with the actual copper. So I suggest splicing it a bit before to make sure it has direct contact

@@madchillerofficial yessir! Just realized I gotta remove for transmission fluid 😅 But hell yeahhh great investment!

@@drydreams8513 helll yeahhh!!! Having this on now makes me more confident on the road, I know debris won’t go under and mess anything up! I know it’ll get scratched up but that’s way better than having my oil pan or motor mount or front pipe getting hit!

@@Boosted10th902 ever since I put it on I can’t tell a big big difference because I already had the front strut bar , type r brace, and white line rear sway bar. But I know the front feels stiffer than before on turns. It’s worth it. I’m going to get the rear one that Ultra racing makes that goes near the exhaust hangers

I have a full exhaust system from MAPerformance

@@ElPinche97 full 3inch?

@@TheRealityChannel7-h7ryessir! 27won 3 inch catted downpipe, PLM 3inch front pipe, and 3inch MAPerformance Race exhaust. It does have drone when stepping on it, but when I’m cruising there’s minimal drone.

@@ElPinche97 cool, you have any mufflers on it

No issues here! Car starts up great everytime! It’s not a power mod it’s more of a maintenance mod and I haven’t had any issues with these. The car starts up better and runs great.

@@ElPinche97 cool, I'm going to get those coils then soon.

The jacks I have are for 3ton And going from the side to the center one or center to side one is easy, just lower it down slowly After so many times of doing this it’s easy like a second hand skill haha

Aye Ark has a pretty badass one I was looking at theirs heavily back when deciding on an exhaust. But I saw the quad tips and wanted to be different than dual or tri tip. The new version MAP is releasing does look ugly but this one I love it.

Should be the same!

@@zmagnft I made my mishimoto intake have a ram tube that goes down there so the intake box gets more air and the temps are lower now! I believe with the PRL Cobra it would be super beneficial also! For the module, it’s an order form and I believe they’re out of stock currently. You’d have to keep a look out for them docs.google.com/forms/d/e/1FAIpQLSdtCmInNeZf9X0T1VM04fYuVM2tek2cABaLlR_FFdFsx181QA/closedform

@@BADxSNAKE helll yeahhhh

It happens!! 😂😅

Stainless steel Goodridge lines for the Si from Unity Performances’ website

@@ElPinche97 Thank you

@@charlieconway7884 Bumper Plugs is what they’re called! You can have them match your paint code and they fit in the holes perfectly. They’re like $30 though

Someone told me they’re supposed to go on before I put the rotors on, I haven’t had any issues but I did get a larger spacer that has a hub centric center(12mm) and some hub centric rings for my wheels and it’s all lined up perfectly!

If your car is lowered, I’d try to turn the wheel all the way to the right, and remove the fender liner where the intake is. It may be a tight area to work with but I was able to remove it like that 2x when I had it. No jacking up the car

@@ElPinche97 Is removing the fender liner a bitch to do? Either way I'm doing it Saturday, but just curious what I'm walking into here

@@fliggle10super easy, how I showed in this video , just the front portion of it has to be pulled back to access the filter

it only stays on white if you have your accessory lights turn on, and when your low beams/high beams are on. If you have your light switch on AUTO during the day or OFF, then the sidemarker light is off.

it is 1 screw and then you just pop them out

Thank you my brothaaa. It looks Amazing !!! ​@@ElPinche97

With stock lights no it doesn’t have to be cut

Time for a whole new car.

You have to have your ebrake off, the light switch has to be on Auto, and it has to be during the day. That’s what they said. Because at night the animation gets canceled out to make the low beams turn on since it’s dark.

@@ElPinche97 i must've done it wrong the first time when i installed them, retried that same method again since you mentioned it in the video and it worked lol kinda weird

@@HondaRider4Lyfeyeah weird I wish the animation also goes on at night haha oh well though they’re still sick AF

Yeah we’ve tried everything and even making it be on just the parking lights not on Auto, and the animation won’t go. It’s weird. The DRL bar does the animation at night but the jewels do not , it gets canceled out due to it being night

@@ElPinche97 thanks man I really appreciate it

Yess that’s what happens haha it’s not that bothersome anymore