Keep the videos coming! As a fellow miner, I enjoy hearing about the day to day challenges & wins. Lots of saturation where I'm at. Is it something your seeing?
I’ve had one of these miners hooked up for a four month, and have not even had a single witness in Miami. Any suggestions on how to get this to actually start making some money?
Great video! I have a dumb question about installation. I can just use the indoor enclosure and just run the wire to my 8dbi antenna 55 meters up and it would work just fine correct? I don't need to have the actual unit close to the antenna via the outdoor enclosure right?
Awesome way to 3D print your own antenna mounts. I am definitely interested in seeing how your mobile unit will work. I was thinking about that setup in March when I first ordered one but I have yet to receive my SyncroBits.
@@DoItJustinKace Pretty curious since if it goes offline from a battery dying then it will have to resync again. But then again they don't use that much power is what I understand.
Hey Justin great video. I also recently received my miner and I believe I made the same mistake as you where I didn’t necessarily follow the initial set up correctly and now have blinking red lights. Any troubleshooting step recommendations you have would be amazing!
4:40 im getting red flashing also, altough i left it 1.5 hours to update before configuring it and i tought it was over because i got white blinking,.i i guess il leave it fews hours and hope its ok edit: still red flashes, and after some time it reboots ,starts orange (syncing) then again red,.
@@matthewpyro yes. it was in the wrong lan port of my internet router. if its not that diagnose it and contact syncrobit support they were very responsive
Great content again Justin! I was actually planning on using studio light stands or a tripod for my next 3 deployments before I saw this video! I Was gonna just use zip ties and velcrow straps for mounting, but those 3D printed mounts you made are slick! Any chance I could get the link to those 3D files?
@@DoItJustinKace perfect! Will be looking out for any updates in the new year. You got a lot of support in Canada! If you do decide. We taking notes lol
@@yuhu7567 I'll keep that in mind. I was about to spend $6K today for some miners in Canada, but I don't know the duty costs for them coming into the United States. Not sure if I should be worried.
1. Wow ok I have the same low earnings as you. Were those low earnings with the stock antenna? Because that's what I have and I'm only getting 0.03 hnt per day. I wonder if syncrobit just has terrible stock antennas. Did the external antenna help at all? 2. Which antenna do you recommend for the syncrobit? 3. How does the fan cool anything if the outdoor enclosure is an airtight/waterproof case with no vents?? Scared to use mine because of that.
@@DoItJustinKace hey I’m new to this mining stuff and I’ve been doing so much research on a antenna for my syncrobit indoor miner , I live in a apartment. And I’m looking to get a 5.8 antenna but I’m honestly confused on what’s the right one. Do you know where I can get a 5.8 antenna for my indoor NA syncrobit ??
@@DoItJustinKace once it's connected by ethernet and set up, can I then re-set it up by WiFi I.e. Will it now connect as its been set up with that WiFi before or will it still only need ethernet use to work?
Hey man wanna come put some of these hotspots down in fountain Colorado? They are killing the transmit scale in Colorado Springs. We need additional pylons.
Maybe I could get some help from you guys with a syncrobit miner I'm having trouble with. It is 9m in the air and PoE, with a 9bdi antenna. It seems to be connecting to wifi first and I don't know how to forget the wifi network and force it to use the Ethernet connection, the wifi is just barely in range so it's in and out, mostly out.. If I use dashb.it 1. Will I be able to change these settings and check more things? 2. I will need to be hardwired into my network with what ever computer I'm using correct? 3. What browser is a known good browser to use, anything other than Chrome? Or is there a specific one that you know works best?
They send the PoE injector but not the splitter, this is why you cannot plug directly... Get a PoE splitter and it will work fine. Anyway, is supposed to work directly via poe injector (power and data together) without splitter, as they say the device supports that feature... curious.
What website or software are you going to be using for mining earnings for taxes? Some of my miners are used so I also need to find a way to edit whatever csv file the program exports. Maybe a video idea
yeah I have used that. My example would be the first miner I received was Nov 1 and was brand new the second and third one I had to transfer and setup on the Nov 10 and Nov 20. I didn’t see an easy way to isolate miner 2 and 3 to those dates. I would end up having to go through hundreds of transactions between Nov 1 and Nov 20 to see which miner it was for
I did same mistake as you, i didnt give it an hour to update, now its only all red - what exactly did you do? So far i only registered hotspot, should i just give it couple of hours ?
@@DoItJustinKace ye got it today but it has missing parts.. there is no power cable whatsoever only one ethernet cable in box.. is that supose to be lika that?
anyone having issues with miner not to connecting to wifi. I have xfinity and when i try to connect to my network, it just tells me password is incorrect even though im inputting the right password
@@408427 xfinity is a pain for me. I have one that when the system restarts it won't re-connect to xfinity. I have to go to the house to manually fix it. And this place earns me .6 HNT a day so I wanna keep it running!
It seems like those in or close to large metro areas are flooding those areas to divide the pie of rewards more and more, while those on the outskirts or rural areas receive little or no mined currency. With all the same investment. Can the network burn out? Reward structure is not equal to all investors, if the network needs to expand for the good of the network there has to be a way to get insensitive to spread out. Limits in hexagons might be necessary in order to spread the coverage.
I know, comrade, I'm kidding we have a long wait of 12 to 20 weeks if you happen to know how to get there quickly let me know otherwise the video is great greeting😇
Keep the videos coming! As a fellow miner, I enjoy hearing about the day to day challenges & wins. Lots of saturation where I'm at. Is it something your seeing?
Yes. Oversaturation at an amazing pace!
Was it a slot for a sim or a Microsd card on the mainboard?
Are you supposed to install a sad card in the syncrobit? If not what is the port on the board on the left side? Just a diagnostic/software connection?
Where did you get your antennae?
Hope mine arrives soon fingers crossed xx
bobcat beat the delivery time but still stoked actual miners are being sent.
I’ve had one of these miners hooked up for a four month, and have not even had a single witness in Miami. Any suggestions on how to get this to actually start making some money?
A syncrobit? I'd need to know more about the situation. Did you mod the LoRa and system settings from the dashboard?
Your channel is amazing man, keep it up!🍻
Thanks, will do!
Great video! I have a dumb question about installation. I can just use the indoor enclosure and just run the wire to my 8dbi antenna 55 meters up and it would work just fine correct? I don't need to have the actual unit close to the antenna via the outdoor enclosure right?
How long ago did you order the SyncroBit? and who did you order it from?
Scapler. Found it on Facebook Marketplace.
Where does the black cables end go to?
What model Mifi hotspot are you using in this video? I have an 8800L, and I can’t get port 44158 to open.
Awesome way to 3D print your own antenna mounts. I am definitely interested in seeing how your mobile unit will work. I was thinking about that setup in March when I first ordered one but I have yet to receive my SyncroBits.
If this works I'll be designing a system and testing it out. But I want to know how long these batteries last.
@@DoItJustinKace Pretty curious since if it goes offline from a battery dying then it will have to resync again. But then again they don't use that much power is what I understand.
Do you know if the outdoor enclosure is good enough for the cold weather
Can you connect wifi for setup or do you have to have the hardwire ethernet connection?
Hi there, what exact pigtail cable r u using for the outdoor rig? Or which one is the best?
Hey Justin great video. I also recently received my miner and I believe I made the same mistake as you where I didn’t necessarily follow the initial set up correctly and now have blinking red lights. Any troubleshooting step recommendations you have would be amazing!
After leaving it alone and connected via ethernet for 4 hours it was fixed. How about you?
@@DoItJustinKace ditto eventually went green on its own over time. Appreciate the response!
Question can you run this directly off wifi?? Besides ethernet power?
Looking to install my Miner outside
How do you do for entry in dashport ? Bcs always is a mistake
4:40 im getting red flashing also, altough i left it 1.5 hours to update
before configuring it and i tought it was over because i got white
blinking,.i i guess il leave it fews hours and hope its ok edit: still red flashes, and after some time it reboots ,starts orange (syncing) then again red,.
Did you ever fix it? Mine is doing the same
@@matthewpyro yes. it was in the wrong lan port of my internet router. if its not that diagnose it and contact syncrobit support they were very responsive
Great content again Justin! I was actually planning on using studio light stands or a tripod for my next 3 deployments before I saw this video! I Was gonna just use zip ties and velcrow straps for mounting, but those 3D printed mounts you made are slick! Any chance I could get the link to those 3D files?
Thanks and enjoy! www.thingiverse.com/thing:5102429/files
Would you recommend this over the bobcat?
mine did not come with the POE adapter. just the standard power port power supply ... oh well.
Where can we purchase your 3D prints and which tripods you recommend to set up antenna in the attic ???
As I said in the video, I don't sell them. If I do, probably after the new year.
@@DoItJustinKace perfect! Will be looking out for any updates in the new year. You got a lot of support in Canada! If you do decide. We taking notes lol
@@yuhu7567 I'll keep that in mind. I was about to spend $6K today for some miners in Canada, but I don't know the duty costs for them coming into the United States. Not sure if I should be worried.
Just mount it on the frame if you have no base. I can also tell you I got on the roof and now I do double the witnessing.
My units fan was so loud. How does your fan sound?
Pretty quiet. Not loud.
@@DoItJustinKace mine sounds like a small plane
1. Wow ok I have the same low earnings as you. Were those low earnings with the stock antenna? Because that's what I have and I'm only getting 0.03 hnt per day. I wonder if syncrobit just has terrible stock antennas. Did the external antenna help at all?
2. Which antenna do you recommend for the syncrobit?
3. How does the fan cool anything if the outdoor enclosure is an airtight/waterproof case with no vents?? Scared to use mine because of that.
I have a 8dbi RAK but am only making .1 HNT a day in an area I should be making .4 HNT. Not sure what the problem is.
@@DoItJustinKace hey I’m new to this mining stuff and I’ve been doing so much research on a antenna for my syncrobit indoor miner , I live in a apartment. And I’m looking to get a 5.8 antenna but I’m honestly confused on what’s the right one. Do you know where I can get a 5.8 antenna for my indoor NA syncrobit ??
Any reason you decided not to use POE for power?
Because it would have tried to access internet in the same manner.
Just answered my own question...your running it remote off of a battery and solar panels. Nice!
Can you link to the power adapter that you got instead? Thanks!
@@hohum911 it's just a 12v 1a pulled off some other device.
How many rewards are you getting from SB? I heard the rewards are low.
Hi, can you set it up without the ethernet cable? I.e using the WiFi only
At the moment that's how it's working.
@@DoItJustinKace once it's connected by ethernet and set up, can I then re-set it up by WiFi I.e. Will it now connect as its been set up with that WiFi before or will it still only need ethernet use to work?
Hi , pls ,you how can i restart the SyncroBit . thank you
Hey man wanna come put some of these hotspots down in fountain Colorado? They are killing the transmit scale in Colorado Springs. We need additional pylons.
You find the locations, I'll drop some bobcats there!
How to access the Dashboard or link please or link access
Whee did you pick one up from?
Facebook Marketplace
Maybe I could get some help from you guys with a syncrobit miner I'm having trouble with.
It is 9m in the air and PoE, with a 9bdi antenna. It seems to be connecting to wifi first and I don't know how to forget the wifi network and force it to use the Ethernet connection, the wifi is just barely in range so it's in and out, mostly out..
If I use dashb.it
1. Will I be able to change these settings and check more things?
2. I will need to be hardwired into my network with what ever computer I'm using correct?
3. What browser is a known good browser to use, anything other than Chrome? Or is there a specific one that you know works best?
They send the PoE injector but not the splitter, this is why you cannot plug directly... Get a PoE splitter and it will work fine. Anyway, is supposed to work directly via poe injector (power and data together) without splitter, as they say the device supports that feature... curious.
What website or software are you going to be using for mining earnings for taxes? Some of my miners are used so I also need to find a way to edit whatever csv file the program exports. Maybe a video idea
davetapley.com/helium-tax/
yeah I have used that. My example would be the first miner I received was Nov 1 and was brand new the second and third one I had to transfer and setup on the Nov 10 and Nov 20. I didn’t see an easy way to isolate miner 2 and 3 to those dates. I would end up having to go through hundreds of transactions between Nov 1 and Nov 20 to see which miner it was for
Sponsored by the group Facebook page lol. By the way those stands you build are really nice
Thanks! But you can see the cat hairs sticking out of them!
How much have you made? I just bought one and want to know if it's worth it
I did same mistake as you, i didnt give it an hour to update, now its only all red - what exactly did you do? So far i only registered hotspot, should i just give it couple of hours ?
didnt assert location yet
I dunno. Tech support made me assert the location. Maybe you really do need to.
Ordered mine on the 15th of June and I'm still waiting
Mine took a year to ship. Hang in there.
goin to get mine in few days so this could be useful
Syncrobit? Nice.
@@DoItJustinKace ye got it today but it has missing parts.. there is no power cable whatsoever only one ethernet cable in box.. is that supose to be lika that?
Mine won’t even let me add it to the helium app it says contact manufacturer i tried with and without the ethernet cord.😬
Ordered my in April still waiting for it to be shipped
I bought off a scalper in order to get one to do a video on.
@@DoItJustinKace great video! Thanks for taking one for the team!
Got it yesterday .8 month late april 18 order .73xx
Glad you got one, I cancelled my order with that crap company roll out. Hope it works for you though...
You cancelled with Bobcat? I thought they didn't allow it.
@@DoItJustinKace Nope, my Syncroshit order
Have you heard of $TIME Wonderland
I haven't expanded to learning alot about crypto to be honest.
⏳⌛️👀
Yes i heard invested in it ! 70 percent down now! stay away!
@@KK-iq4bi you’re not thinking long term. Don’t get into projects you’re not gonna believe in long term. $TIME is not a two week flip LOL
That shit Is a rug. Your gonna lose all your money
Only fools would believe those percentages are sustainable.
I’m ready for the off grid !! How much for the Wi-Fi a month
I guess we'll see in that video.
anyone having issues with miner not to connecting to wifi. I have xfinity and when i try to connect to my network, it just tells me password is incorrect even though im inputting the right password
Can you connect it with an Ethernet cable? Try that and then restart it and enter wifi info. Then pull the cable out and restart it again.
@@DoItJustinKace i have the same issue. I have finestra miner and it doesnt have ethernet port so only wifi and i cant connect it xfinity internet
@@408427 xfinity is a pain for me. I have one that when the system restarts it won't re-connect to xfinity. I have to go to the house to manually fix it. And this place earns me .6 HNT a day so I wanna keep it running!
It seems like those in or close to large metro areas are flooding those areas to divide the pie of rewards more and more, while those on the outskirts or rural areas receive little or no mined currency. With all the same investment. Can the network burn out? Reward structure is not equal to all investors, if the network needs to expand for the good of the network there has to be a way to get insensitive to spread out. Limits in hexagons might be necessary in order to spread the coverage.
We'll see what proposals might happen to make better infrastructure.
Not a bad unboxing pretty darn good. Very interested to see how well synchro bit does for you
It's starting to stabilize. Patience is always tough.
I’m guessing your not getting any rewards on your syncrobit lol.
Were the fuck is. Mine. Ivw been waiting since April 10th
Best to email support.
Had the chance to get one. I didn’t know it came with outdoor enclosure
Yours did not?
@@DoItJustinKace got bobcat instead. If I would’ve known it came with outdoor enclosure I would’ve gotten it
I have one ordered looks like a nice unit will be going on the roof setup as poe with a 5.8dbi
Send me one in belgrade serbia
Tnx😇😇😇😇
Well I got use for this one! :)
I know, comrade, I'm kidding
we have a long wait of 12 to 20 weeks
if you happen to know how to get there quickly let me know
otherwise the video is great
greeting😇
dont order any from them this is a scam you will never see your miner they just send it to youtuber to scam you
Does this still work? I have two still unopened
You can. Next month they will start making HNT again. But I doubt it will be much.