How to Dual Boot macOS Catalina and Windows 10 on a PC (Complete Hackintosh Guide)
HTML-код
- Опубликовано: 8 сен 2024
- Please follow the instructions in the video to dual boot macOS Catalina and Windows 10 on a PC.
This video will provide you'll detailed instructions to get you work done.
Software Used:-
Trancmac :- www.acutesyste...
Rufus :- rufus.ie/
Multibeast for Mojave :- www.tonymacx86...
Clover Config Tool:- www.macupdate....
Boot Argument:
-v GraphicsEnabler=Yes
If you find this Video helpful, Please Subscribe to my Channel to become a contributor to this Tech Family.
In order to support please Like,Share and Comment.
Thanks!!!
Since I am probably going to use this vid for the upcoming customization...
2:27 Bootable USB
7:31 Boot from USB
24:31 Windows 10
28:05 Win10 Bios
Did you succeed?
from where we can download Clover_v2 & EFI file ?? Also, Clover partition is not showing in windows
Tejas S You need to create a tony account then download clover
Yo thanks
@@taguotafecedric8690 I ended up using a hardware switch to toggle different hdd and sdd setups.
NOTE: Must have an Intel Processor
Brah
will ryzen 5 work???
@@adarshagnihotri2681 I have Ryzen 9 and it didn't work. I believe it will only work if you have an Intel Processor
Thanks for saving my time
@@pokgaiguaylo8962 opencore have a support chart where you can see if your amd processor will work
Awesome video. It took me 48 hours to fully setup my laptop with Dual Boot Mac OS Catalina and Windows 10. It was a pain in the butt due to multiple clover EFI files/config.plist but finally managed to do it. Just took me a day to finally boot from verbose to installer only.
hello sir .how to make clover EFI partition?thank you
Really seems like a pain in the ass...
@@leibertpuyong891 do you got answer?.. plz replay here..
He talk so fast , i need to put the video at 0.5 slower loll finally 1 week on this projet and its not finish maybee i will finish to have dual boot too
Followed this guide and successfully installed Mountain Lion on Dell OptiPlex 990! AMD Radeon R7700 HD, 8GB Ram, 1GB VRAM (Installing RN. Will update when done.)
Update: graphics card limited boots to safe mode. Removed and works fine. No onboard graphics for Intel HD Graphics 2000 though. It works flawlessly with some graphical effects in chrome and Firefox.
im planning on switching to a pc from a MacBook and going AMD based would it be a good idea to sell the Macbook so my question Is does the macOS run smooth enough and perfectly ? or would you suggest keeping the MacBook
@@yahyaahmed1539 where are those 3 files he pasted there I cannot find them ?
Would have been helpful if you told people where to find a copy of Catalina. All the versions I have found are ISO not DMG which I'm not sure will work
Opencore is more stable and its only 700mb (its online installer) its safer since these iso’s/dmg/raws are modified where with opencore you install directly from Apple just like a Mac installing installer tool
Hey Man , Thanks for the video. Just wanted to share that if anyone out there has Lenovo G580 Laptop , this tutorial works. Just have to change graphics card from bios setting to use onboard graphics. The Bluetooth and Wifi doesn't work. The onboard Intel Graphics works fine. For sound install the latest VoodooHDA with classic settings. Feel free to ask if you have question. Once again Thanks for the Video.
excuse me how do you make your intel graphics works
@@user-vs3uu7mk5f first remember to chose UMA instead of switchable graphics in bios setting. Then follow the video and instead of choosing AMD (which is his graphic card) chose inject Intel . That's it
@@MahdiPourRahim but i don't have uma in my bios settings?
@@MahdiPourRahim i can only boot when i inject intel and use 0x12345678 , however this way my graphics card will never avaliable to use
Unable to find the clover files :/
Thanks!!! I actually followed the internet install on reddit and made a usb on mac using one of the utilities (forgot what its called, sorry) and then followed the rest of the guide. Worked perfectly!!!
My you please tell me about your laptop specs? thank you
so i dont need an actual usb drive for this to work?
Can we update macOS Catalina to macOS Big Sur ? Also I wanted to know if wifi will work in my mac OS? Please answer 🙏🙏
Fantastic content bro, your explanation is good, the way you record things is also good, overall even someone without computer knowledge can understand these videos
clover partition not showing up help
Same. Did anyone figure it out?
In W10, go to search, type in Computer management and select it. In the left sidebar under "Storage" group you should have Disk management. Right click to CLOVER partition, and select Change drive letter and path -> Add. And then select some letter you want. After that, I was able to see the Clover efi partition.
Assuming I install ios correctly on my AMD-Win10 machine, would iMessage work with my iPhone even though it's a dualboot running on a non-apple build? How would that look with a wired connection on my PC and lte data being used for the connection on my iphone? I'm assuming it would work okay, but i'm not sure where in the network layer my phone recieves the text to be messaged. It's probably more work than it's worth if imessage needs a shared network wireless connection or something sticky like that.
Nice video Bro.....Thank you so much for this Very Helpful Tutorial.Clean and Detailed.More power Bro.All The Best...!!!
so for installing macos you have do delete/backup your files on windows?
I don't think so. If you already have windows running we can install Catalina on a specific partitioned disk like D: But NOT C: which contains windows os.
@@ExclusiveTechniques can u show us how with a tutorio so tht we wont crush our already installed windows
where is the link for Clover_V2_5k_r5097.pkg and cloverx64.efi???
I created a Bootable USB using TransMac However I can only see the drive on my PC not the CLOVER Partition that should have been created.
Thx bro it's work for me.
Just getting issue in installing bootloader but fix that one by installing latest version on multibeast.
And three files that people were saying is of multibeast skip them all just install new version of Catalina multibeast instead of Mojave version.
Thanks.
CosminSefuVostru
Opa cosmineee ce ai făcut tataaaa
After I restored the USB to the dmg in TransMac it was nonexistent in file explorer, so I couldn't continue any further. Anyone else have this?
Yeah it went from the to all of a sudden you should have clover. I was like wtf
the longest video ever ... but it worth my time ... thanks ...
I'm confused, at around 5:46 he says "The partition we just created" when did that happen- And I don't have it-
For Dell laptops make sure to disable speedstep to proceed with the installation
why?
@@sodorfootage not sure but it would not work until I disabled it.
@@jellyjiggler5311 ok i have a dell too
@@jellyjiggler5311 my hackintosh never loaded
@@sodorfootage really, my dell xps 9580 loaded ok
where did you get that clover partition?
Where does the files inside it came from?
Epic! Check the description
And what's with the description?
Epic! The clover download
@@totalld3274 Okay but he gives zero description about how to actually user clover to create the partition
@@Shisueh did you find a solution waiting for your response
Long process but it works!!!! Nice video
cool big suport keep it up hop you the best in futur piece
Currently running catalina 10.15.4 . Tried to install windows using bootcamp. But halfway through the windows setup. my mac crashes and i got a flickering screen on my mac. And the windows disk is not available upon startup :(
says without any further ado, let's get started; plays a 12 seconds long intro.
*without wasting any further adieu*
Who cares? The dude explained a lot of things and showed a few useful tricks to handle that finicky mac os installation
Stop moaning! be grateful to anyone investing theirs time so people can benefit.if you can do better then create your own videos insted of nagging .
yes, I can install dual Os (mac+win).
--
However, I have problem in sharing the files between the Os.
For example, the Ms Word file I created in MacOS can not be opened smoothly in Windows. Sometimes the content of the file is corrupted.
--
fyi, I am using ExFAT format for the drive.
Ahh I can't seem to make the EFI clover partition. After the mac image is there on the USB it won't show anything in This PC. can't go any further than that now can I?
same, did you solve it?
can u give us the link for clover files that needs to be copied to the mac os pendrive
Thanks a LOT... working perfectly in HP ELITE 8470P
How's the performance? And how was your experience?
@@TheWohnJick completely migrated to mac os in hp elite 8200 and 8470p.... bootloader clover only working perfectly... some problems facing in open core.. lot of errrors during configuration
@@Dr.kc.Gowtham.mds-prostho I see.
Hi, can you help me. Im stuck at ACPI ERROR: 6 tables load failures.
u need to select ahci mode instead of acpi mode
the W in windows is because of the FAT filesystem character limit
why choose catalina though? u cant run 32 bit program on it, and it becomes limited
Then install the Mojave image...
Would I be able to use an iPad Air 5th generation like I would be able to in the stock Apple ecosystem?
Is there a way to install OSX on a pc that already has windows on it without formating the hard drive, but instead just splitting the disk to 2 partitions? also will i be able to update my Catalina?
did you figure this out?
@@ahmedel-akkad6587 didnt even attempt without knowledge
@@miodozer4678 I am looking for same answer, please respond to this thread when you find out 🙏
@@rahulsonvane8141 sure will, if i will have some spare time maybe i will figure this out by myself, doesn't seem too easy to get this all to work perfectly, im sure its possible yet i am not expirienced at all if it comes to hackintoshing
@@miodozer4678 You create a new partition for your disk then you split it inside of the mac os installer and then you are able to install it on the other partition and to keep windows, then you may use clover to make it recognize both Os's
where you have installed catalina image
Another life saver
Please make same video for Big Sur
Heyy I already made one please check it out: ruclips.net/video/kUNc_3O4DyY/видео.html
At time 6:00 you copy some file into the USB key, but where can I find them? You say "in the description", but there's only Multibeast and Clover Config Tool!
bro i think you have to extract multibeast file from zip.
Did you find it?
Nice tutorial! Does this work with nvidia? I heard something about nvidia doesn't support this ?
6XX and 7XX series cards will work with all versions of MacOS, 9XX and 10XX series cards will not work after high Sierra , 16XX, 20XX and 30XX are not supported in any version of macos
Where did you get the catalina file bro.
While making video you should give every information about what you have downloaded
Whenever I get to my boot menu in clover there is just a 3 2 1 count down but I can't move the mouse or pressing any key doesn't do anything
Check in your system bios is there any mouse lock checked
Someone help me out. can't see the efi partition of the usb drive after the restore process. Could i be missing something? Anyone with similar problem
This guide is somewhat of a deception.
Every hackintosher with some fair knowledge knows that the Clover bootloader files and settings (efi, config.plist) is the most important early part to hackintosh_install via a bootloading usb. At 4: 30, guy just said '...your Mac image file...". It is not; it already has pre-installed Clover (with settings) plus the actual macOS installer. The Clover will not work for all PCs as set; it needs to be fine-tuned specific to PC hardware. I can tell you the "Catalina Mac image file" (if the guy downloaded it from the site I suspect) will fail if you try hackintoshing an ASUS A555L laptop.
Pro
Yeah..
You kind of skipped how to and where to get the macOS files and creating the partitions.
THEGAMINGSENSATION 2486 I think so yes. Go to the hachintosh website and you can get it there. I would share a link but I am not at my computer at the moment.
Sir aapka dual boot video mein jo bataya woh maina kar liya
Lekin problem hai ki waha par usb, internet,audio drivers load hi nehi huya issiliya hackintosh mera usb,mobile kuch bhi detect nehi kar raha hai
Help i am stuck in end randomseed
why anyone didnt help?
Bad oc/clover config.plist
What's ur PC configuration
Is it possible to use the window seat drive for windows, and use my flash drive for macOS?
where you downloaded the catalina.dmg image file
did u found
Check hikintosh website in that search catalina dmg file
Opened but the trackpad WiFi Ethernet speaker and usb are not working basically useless
where to download the system??????? no link bruh
Help! There is no Clover partition after restoring USB with Catalina dmg file.
Hi! Great guide! Shoud it work on any Intel based machine? For i.e. on a Mini PC EliteDesk Intel i3 6100U? Thanks in advance for your time!
I’m stuck at the second boot, I’m using over 30min here
Can't I just install an OS on an existing partition on my windows PC without doing the whole process?
yes,but with a virtual machine
How long does it usually take until the Apple logo comes up? For me it never comes up, and it looks like the booting is stuck, but then it would print a line or two once in a while... Is it stuck or it actually takes this long to boot?
Where can I get the Catalina software
Download in Google Chrome sir
while on the Mac OS is it ok to update the Mac if an update is available say from Catalina to Monterey and nice job on the tutorial by the way
thanks for you, i like it..
@8:25, how do i configure hp motherboards?
cause i have an hp prodesk 600 gm.
I subscribes bro. Nice content 👍
I am unable to boot from the USB on my computer. It's a DELL laptop. It says no bootable device found. I had made changes on the bios but still gives errors. Can someone please
help?
@All Rounders GamingThanks for replying.! yes, it's uefi!
I also want to know how I can have multiple OS on the same efi.. I now only have my ubuntu
@All Rounders Gaming Can you please tell me how?
@All Rounders Gaming more than 4 is great if it works seamlessly..
@All Rounders Gaming DELL inspiron 3537, I have an external drive as well.
@All Rounders Gaming what;s your opinion of putting Big Sur on i5 processor on external drive?
Good job Adams
In addition, you mention a clover partition that appears after creating the flash drive for mac os. We are still in windows at that point, creating a partition doesn't come from creating a bootable flash drive??
right, I didn't find any EFI partition either :(
I don't know why but I keep getting "error allocating 0x8488a pages at 0x0000000017107000 alloc type 2" "couldn't allocate runtime area"
Anyone know why?
i created the bootable usb with Catalina (via TransMac), did all the changes in BIOS .. tried to boot up with the usb .. but it only shows black screen with white bar flashing and nothing is happening .. :( why can't i go into installation process?
Hey this is great- however I’m wondering if it is normal for the first install from clover boot loader of macOS to be constantly automatically rebooting after every page? ( also I have had to manually reboot a couple of times as it would stop and not go forward) It usually freezes or stops at
HID: Legacy shim 2 then I reboot and it goes to next page and continues and then auto reboots after every page for a while again. It’s not the same page rebooting but doesn’t seem normal
hey bro I'm using hp Omen 15, my internal mouse and WIFI isn't working thirdly My PC isn't booting direct from hard-drive but if I plug the USB, can you help me please
How did clover partition?.. how to do?.which disk did partition?. i think u skipped it in this video..
ok, tour installation should work but you didn't put the right files in the description so I can't bring back clover_v2 ,nor CLOVERx64.efi properly..... greetings, gg
No not UEFI because some people use the old Legacy format (Me) so let people open msinfo32 (Win+R and type msifo32 and look for UEFI or Legacy)
Hi, simple question but important. I have windows installed with everything, I'd rather not re-install windows and begin again. Can I create a partition/2nd drive, install mac os/catalina & still boot into my existing windows via dual boot?
of course, as long as you don't do any mistakes in the partition settings. killed my laptop with that trying to install linux on it.
Hello, Will Mac OS Catalina support in my laptop with Nvidia MX940 GPU?
Running both OSs on the same drive is not advised. Always use separate drives and ensure the Windows update service can't access the Mac EFI partition.
Why
What if i have a 128gb drive for windows and 2tb hard drive for games but i split it so i have 1tb for games and 1tb for OSX?
@@hasj because an update can screw up your efi and then your system won’t mount or boot
Great video but I have tried to find the Catalin dmg but can't find it anywhere without coming across trojans etc... Any help would be appreciated
OK I found it eventually and it is all working. Thanks
@@stephenriley1565 Where did you find it at? If you dont mind me asking
Go to hackintosh zone
NO COLVER DRIVE FOR ME :( :(
Make a tutorial for laptop please.
How the F can you open the USB-Drive after writing the mac-dmg onto it? If I want to open it, my windows shows me: "You have to format this drive to open it"
After you install clover , a new ufi partition is created, that you can access on windows
shritij dighe does not work for me :c
Thanks man, now I can use both os , best video for dual boot (MAC &WIN).
drive has been locked by another program when pressing "restore with disk image" and after succesfull mac format
anyone ??
What's the name of the music you used in your intro? By the way great video :-)
Lol
I still cannot do the EFI partition thing. can someone help me?
hey guys, do you know if it's possible to do same steps but save my current windows and install this new Mac OS on other harddrive?
efi file not showing up after creating a usb boot disk for MacOS on windows in transmac. No way i can see a EFI folder, so what do i need to do if no EFI was created?
You have to use 'Niresh Catalina' image if you want to follow the exact steps, both partitions are included in the image. If you use official image you have create the partition manually and put clover files along with proper kexts and all. I hope this makes sense. Thanks!
great job... Where can I find the catalina iso that you used in this video?, please
Torrent
@@tylerdaniels9000 please help me
@@miguellucio7093 Hackintosh Zone
@@brattys.4687 got a link? I went to hackintosh zone and couldnt find it, the file is Niresh-catalina right?
@@lukehyland2643 Niresh Catalina indeed. Thats the most common downloaded i believe
Does this work on Lenevo laptop that has basic intel graphics card and i3 processor
i keep getting “error allocating 0x116b8 at 0x0000000006f03000 alloc type 2 Couldn’t allocate runtime area” not understanding what’s going wrong. I’m using intel 7700k, gtx 1080 msi z270 pro A
Hi, Can you please share the screen shot or image with me by hosting it and sharing the link. Ill check what best i can do in that case,
Adams Tech Guide same issue
Works perfect thanks my guy!
Little Update since i made my Hackintosh ! So im Basically ruinnin Lenovo - IdeaCentre 520 All-In-One - Intel 'Core i5 - 8GB Memory - 1TB HDD .
First Problem i had was that i wasn't getting my wifi to work but turns out Qualcomm Atheros cards don't work, so i just use a android phone with Bluetooth tethering not the best speed but decent enough for me .
Second problem is that i keep reading how Intel HD 610 Graphic cards aren't supported with hackintoshes so some applications don't work Properly .
just thought i put this out here incase anyone is also using this machine or close to the specs .
but other than that no issues at all ! i did this for fun anyways !
after this work can we download logic pro ? i want to use logic pro but i have windows
Hi thanks I installed it on my Dell optiplex 990 and it working but I have issues with the resolution can't change it. Please can you help on that please, and varibios mode how to remove it
Hey, the clover boot loader is not opening...after booting from USB its black screen???? Any solution please
hi can you help me guys ! when i enter disk utility he doesnt showing partitions ! i want to make it dual boot with windows i dont find a solution and i dont want to format the hole disk & thank you
Do you need a Mac to run clover? I don't have one only a PC hence why I am trying to install MacOS so I can run .dmg files like clover. Help pls!!!!!!
Hello what about if you don’t use any video card integrated video from the chipset i54690k intel HD Graphics 4600 I know this is compatible and the Gigabyte GA-97-Gaming3
Can i use this os in my Asus vivobook s14 s430fa core i5 8 gen. I am use dual boot one's is windows(Which install 240GB SSD)and other is ubuntu(Which install 100GB HDD). please tell me can i use Catalina in my laptop if i delete my ubuntu and install in this partition.
my PC motherboard does not have UFIE. It also runs on an AMD cpu. Can I still install Catalina on my PC?
I have 2 hard drives 1 has windows already installed i want to install mac os on the second one... so the question is can i keep both the hard drives plugged when i need to use one of the os’s or if not is there a way to disable them?
Also do i HAVE to install windows again?
Yes, you can keep both of the drives plugged when you need to use only one of the operating systems, and there are some methods to run only one operating system (either windows or macOS) And you don't need to install windows again. BTW I do not know how but I know that you can my friend has 4 hdd and uses like 4 different operatyng systems.
Edit: I recommend you to use Mojave macOS, it has less problems than Catalina
Hello, mine is Dell Laptop Inspiron 5370, i-core5, 8 GB RAM, Intel Graphics 620, 256 SSD running Windows 10 and along side Windows Ubuntu installed. I created the usb flash drives as mentioned in the video. After entering the boot parameters a verbose screen comes up and then again after few seconds reboots to boot selection menu. (while booting also made sure to boot with selected options).
disabled - speedstep and ahci enabled by default.
any help???
Does this work with pre-installed windows?
I am not getting Clover Partition after restoring catalina image file in USB
everything was nice until i saw clover Partition which not discussed in the video