question: Is it possible to make it go slower? I am trying to make something like this but something can go way slower. if that's possible please let me know how. Thanks
The pulsed current per driver is 1.2A. Driving 2 DC motors with one driver will cause the driver to overheat. The dual L293D provides 1.2A per motor. Of course, you can use one driver for the hobby motors in the video, but this will be a problem for motors that require higher torque. It can also run 2 bipolar stepper motors other than DC motor 😇
Not variable, but the RPM (speed) of both DC motors are not compatible with each other, but the speed can be adjusted using the enable pins. On the board, the enable legs are Digital 5 and Digital 3 PWM pins. I did not use the enable pin in the code, but you can provide the synchronization by specifying the RPM value for both DC motors yourself. 😇
Do you have video about Bi-Directional NRF24L01 communication? I tried to send data back and forth between 2 modules and struggled with it. I was able to send only 1 way data through the module. My project is about pushing button on 1st device and light up LED on 2nd device while able to turn potentiometer on 2nd device and rotate servo on 1st device.
Hey Mert, I have problems with my programming as Im unable to code a lot of the modules and sensors. What would you recommend me to do. Your help would be highly appreciated. BTW great videos, keep it coming
Please I need to contact you for this. It’s so nice 😊 I met you at a point I want to order massive quantities of hobby kits for schools in my country. Can you please 🙏 let chat 💬 off this place probably hold an online meetings to address my needs thanks 🙏 for your quick response!!!!!
Source Code, PCB Files and Circuit Diagrams:
www.pcbway.com/project/shareproject/Wireless_Dual_Motor_Driver_Board_880183f3.html
www.instructables.com/Wireless-Arduino-Motor-Driver-and-Joystick-Control/
www.hackster.io/mertarduino/wireless-arduino-motor-driver-and-joystick-controller-5e4a55
Amazing production quality! It was very pleasing to watch it, thanks to the clean visuals and soothing audio. Keep up the good work!
you are the best at how to projects with the Arduino
Thanks for nice comment
Tam bu konuyu araştırırken attınız. Çok teşekkürler.
Ne güzel denk gelmiş, bir sorunla karşılaşırsanız lütfen bildirin. Kolay gelsin 😇
@@maker101io Teşekkürler :)
_Cool project & Pleasant musics_ ... 👍
_Thanks for sharing_ ... 🙋♂️
Thanks 🙏🏻😊
You are opening my mind! Thanks for the Tutorial.
Thanks for comment ♥️
nice project
Thanks
Can you make an InMoov robot hand control using flexible sensors
I will make it
Güzel bir çalışma
Çok teşekkür ederim 😇
This is really helpful thank you 🙏🙏
Thank you 😇
Joystick action same as using buttons?
Very nice video keep going the good work
Please could you please tell me how is the range control?
Can you make more arduino wireless projects
I will make.. Thanks
question: Is it possible to make it go slower? I am trying to make something like this but something can go way slower. if that's possible please let me know how. Thanks
Hi, why 2 L293 motor drivers when one is all that is needed, "DUAL L293D MOTOR DRIVER"
The pulsed current per driver is 1.2A. Driving 2 DC motors with one driver will cause the driver to overheat. The dual L293D provides 1.2A per motor. Of course, you can use one driver for the hobby motors in the video, but this will be a problem for motors that require higher torque. It can also run 2 bipolar stepper motors other than DC motor 😇
@@maker101io Ok i didn't see that coming, thank you
Can you please make driver drowsiness detection system using raspberry pi and usb camera
Good idea, thanks 😇
I think you will make it am waiting for it
Please, tell me how to remote XOD programming?
Please have a look at this link xod.io/docs/tutorial/ I'll post a tutorial if I find the free time 😇
I will get this PCB and make the own arduino robot
Wow thanks
Are the forward, reverse and turn speeds variable?
Not variable, but the RPM (speed) of both DC motors are not compatible with each other, but the speed can be adjusted using the enable pins. On the board, the enable legs are Digital 5 and Digital 3 PWM pins. I did not use the enable pin in the code, but you can provide the synchronization by specifying the RPM value for both DC motors yourself. 😇
Please make a 6 dof or 4 dof robotic arm too using nrf24l01. I have been trying to make one but i keep getting stuck in errors in my coding.🙂
Woow good idea 💥 ok I will try to it 👍🏻 thanks
Do you have video about Bi-Directional NRF24L01 communication? I tried to send data back and forth between 2 modules and struggled with it.
I was able to send only 1 way data through the module.
My project is about pushing button on 1st device and light up LED on 2nd device while able to turn potentiometer on 2nd device and rotate servo on 1st device.
Hey Mert, I have problems with my programming as Im unable to code a lot of the modules and sensors. What would you recommend me to do. Your help would be highly appreciated. BTW great videos, keep it coming
Bro can I use L293D moter driver in this project please reply
SAMM MARKETTEN GELDİM
Late ?
What do you mean by late? 😇
Please I need to contact you for this. It’s so nice 😊 I met you at a point I want to order massive quantities of hobby kits for schools in my country. Can you please 🙏 let chat 💬 off this place probably hold an online meetings to address my needs thanks 🙏 for your quick response!!!!!