We use these for huge 160db systems with multiple large subs and 10’s of thousands of watts. Ain’t no 3/4 inch silk gonna keep up with that. So you need mids and highs like this.
I have these same prv tweeters I'm about to install into my doors for my build. I'm sure they are insanely crisp. I have 5 skar pax 6.5. Then two prv 6mr500ndy mids also. Then my subs are two incriminator audio death penalty 12s. I'm trying to be loud. Just cost alot and takes time lol. It's fun though.
Mark.404 cross them high so they can take power and get loud! Like 3k-15k! With pro audio the midrange helps reinforce the tweeter if it has a high FS itself and it can obviously play lower and louder!
These are used primarily in Brazilian systems. They face a whole bunch of speakers outside to the crowd and blast it loud. I like mine on the A pillars of my car. You need a serious audio system for these to match, and on top of that, you must be used to very loud music in order to listen to these at high volume lol
Nice video brother, my ear likes the Pioneer though it is reproducing clear HF than the PRV. Tweeter is doing its duty, if we want to add some mids, we can add a midrange. Good work Mike.
@@Harposidious the pioneer plays higher than the prv you know doing what a tweeter is meant to do. mind you the prv has a lower crossover point letting more lower frequencies through with the same value cap they would be identical with the pioneer playing more linear above 12khz
I'm employing these for a resto-mod of some pattern built Harkness folded horn cabs from 1959. These are 3 way cabinets with crossovers and EVM12-L Woofs. Industrial strength audio.
Please try the Peerless by Tymphany H25TG05-04 1" Titanium Dome Tweeter against those two Dayton Audio PA200- 8 inch in a 8 inch test Both found at parts express
Scream ok but does it gives nice quality sound?? Many telling me to stay away from pioneer and get hertz or deaf bonce instead. Not even SP audio. But heard the pioneer and I also have pioneer in the door, I can say that its nice. But need to compare live to know if the other make are better..
with a quick google i couldn't find any replacement diaphragms for the Pioneer. i would never buy a bullet tweeter if replacement diaphragms aren't available. i had a Beyma bullet dead out of the box once but luckily was able to replace a diaphragm on that.
Hi there. Came back to watch video again, noticed some things would like to point out. To make a fair comparison it would be good to have tweeters with the same ohms, and also use the same capacitor on both. Thanks for the video.
Hi do you have a test with tweeters that will fit a factory tweeter location because these are huge. I have a Cadillac ATS and would like to change mine out
Not a good demo. These are best at 5k to 22k Hertz. You have too much distortion feeding through. Believe me the pioneer pro gets unbelievably loud. But you got to filter them with eq. I'm running 4 pros 2x 3.5" and 2 4 inch. And I dont run the bass blocker. Using kicker kxa 400x4 with a Rockford dsr1 maestro for processing the clear sound
Overseers Twentyfour I want to learn about this so I can have very clear music in my house and in my car. How can I learn about these things you talk about?
Im trying to put a nice music in my car I have all prv for my voice but I'm thinking about switching to 8, 6x9 pioneers and I order six of them tweeters what kind of pioneer amps are good for eight six by nines and the six tweeters.sorry to ask I'm just trying to make sure it sounds like it pro i was thinking about putting everything pioneer I already have the radio double DIN The Equalizer the base box all pioneer
Hello i have same pioneer tweeters and for best hpf setting frequency it should be set at 5000 hz .m running it on pioneer 8604 which have hpf setting from 40-500 hz.kindly suggest me best frequency setting on my amplifier
they're both made in China. (i ithink) the Chinese copy everything LOL including the F35. you have to take in account. that Pioneer is 4 ohm speaker. while the PRV is 8 ohms more is more ment for use with home audio. rather car audio. At the same input voltage a - driver will draw 3db more power - driver. If both drivers have the same SPL at a given watt , yes, the 4 ohm - is going to sound louder . Both have the same efficiency. that's why the Pioneer is louder.
I dont trust specs as u can see with my test specs dosnt mean nothing on most cases will test them soon You dont need lower then pioneer gets on tweeter and depending what other speakers you running so on
@@LIFEINSPEED i need loud music. Have 4 1675v2 speaker and 4 ts20 tweeter. Now want to add 2 or 4 speaker and 2 tweeter in trunk. Either 4 pioneer 6900 pro (100watt each) or 4 hertz 165.1(200 watt each) or 2 sv200. 1(250 watt each). Abt the tweeter, either 2 pioneer b400 (200 watt each) or 2 hertz st44(100 watt each)
Buy the diaphram . There should be a screw under the sticker on the bottom. Hold the bullet in place and remove. Then unscrew the tweeter flare. The blown diaphram pops right out . Then place the new one in and screw the tweeter back together . Wala... brand new. A diaphram should be like 15-30$
Pioneer is not available for sale anywhere online. Only through pioneer direct and for $70 each. Not $46. At that price prv is the better choice for $40. MHO
That pioneer plays up to 27khz the prv only 20 kHz the higher the kHz the finer amd sweeter it will play I don't care about mids that's not a super tweeter job to play mids pioneer wins full stop
On this video Mike says the pioneer 4in Pro tweeter is Amazing 😲and it's the one he prefers. In a previous video Mike say He DOESN'T like the pioneer 3.5 Pros tweeters 😔...😒
@@LIFEINSPEED WOW they heavy with a big magnet now im waiting on my 4 pioneers 6 .5 to go with them babies can't wait to hear the clarity of them mids and highs thanks
Pioneer🤘🏾hands down
We use these for huge 160db systems with multiple large subs and 10’s of thousands of watts. Ain’t no 3/4 inch silk gonna keep up with that. So you need mids and highs like this.
I have these same prv tweeters I'm about to install into my doors for my build. I'm sure they are insanely crisp. I have 5 skar pax 6.5. Then two prv 6mr500ndy mids also. Then my subs are two incriminator audio death penalty 12s. I'm trying to be loud. Just cost alot and takes time lol. It's fun though.
But they seem to have very high fs. What do you cross them to?
Mark.404 cross them high so they can take power and get loud! Like 3k-15k! With pro audio the midrange helps reinforce the tweeter if it has a high FS itself and it can obviously play lower and louder!
Passive or active? Are the included caps for the PRVs any good? Dont wanna have to take it apart to switch them out later on
Run them on separate amps, high, mod, low.
I bet it sounds good with the full range.
These are used primarily in Brazilian systems. They face a whole bunch of speakers outside to the crowd and blast it loud. I like mine on the A pillars of my car. You need a serious audio system for these to match, and on top of that, you must be used to very loud music in order to listen to these at high volume lol
Nice video brother, my ear likes the Pioneer though it is reproducing clear HF than the PRV. Tweeter is doing its duty, if we want to add some mids, we can add a midrange. Good work Mike.
No offence, but the PRV outclasses the the Poopeneer by miles!
@@Harposidious the pioneer plays higher than the prv you know doing what a tweeter is meant to do. mind you the prv has a lower crossover point letting more lower frequencies through with the same value cap they would be identical with the pioneer playing more linear above 12khz
the prv cap sounds like it's letting to much lower frequency in.
Pioneer for this all day...piomeer is more smoother...
I use 2 prv tweeters on my chuchero along with 2 mc10ii massive audio on a 2000 watt orion amp and these tweeters scream
This is the PRV TW700Ti . nice video!
I'm employing these for a resto-mod of some pattern built Harkness folded horn cabs from 1959. These are 3 way cabinets with crossovers and EVM12-L Woofs. Industrial strength audio.
I love the PRV speaker
Make 1 video about 3inc mid-range speakers
You do great work man, but I would to see competition on compression Horn Drivers
Pioneer loud and Clear and clean
I love your choice . this pioneer will better match the midrange (Pioneer TS-M650PRO) 👍👍😍
Hey mark can u please do this prv vs the timpano tweeter
Please try the
Peerless by Tymphany H25TG05-04 1" Titanium Dome Tweeter against those two Dayton Audio PA200- 8 inch in a 8 inch test
Both found at parts express
I’m about to run two of those Pioneer tweeters in a headache rache application with 4 Deaf Bonce Arnold mids. Going to be loud!!
Running two of the pioneer in the dash of my truck. These things scream had to change up the rest of my system cuz these were drowning out my mids
Scream ok but does it gives nice quality sound?? Many telling me to stay away from pioneer and get hertz or deaf bonce instead. Not even SP audio. But heard the pioneer and I also have pioneer in the door, I can say that its nice. But need to compare live to know if the other make are better..
Is there a big difference between the b400 and the b350 in terms of loudness and quality?
with a quick google i couldn't find any replacement diaphragms for the Pioneer. i would never buy a bullet tweeter if replacement diaphragms aren't available. i had a Beyma bullet dead out of the box once but luckily was able to replace a diaphragm on that.
I agree, cant repair.
Pioneer best🥇💯
Hi there. Came back to watch video again, noticed some things would like to point out. To make a fair comparison it would be good to have tweeters with the same ohms, and also use the same capacitor on both. Thanks for the video.
Hey bro you gotta watch my other videos where I'm changing caps )
I agree co's prv sounds cheap but I think is due to cheap crossover (capacitor ) being used
@@LIFEINSPEED did you make the comparison of them with the same cap?
@@LIFEINSPEED what is the name of that video?
@@LIFEINSPEED I saw with the one you changing the whole speaker basket
the pioneer sends higher frequency clearer thats why i am picking it
i have a pioneer tweeter similar to yours and i don't know how to replace the coil.it doesn't have any screws to open it.
Hi do you have a test with tweeters that will fit a factory tweeter location because these are huge. I have a Cadillac ATS and would like to change mine out
Just bought 4 of the prv and a 400x4 would that be fine
How about some silk dome tweeters
Pioneer 4 inch tweeters or pioneer 4inch 3 way speakers replacing factor tweeters
Add some Crossfire audio in the mix. Love crossfire
Bro is the tweeters capacitor on the plus + side only one per tweeter thanks 🙏 great videos
Yes only on + side
So I guess what you are getting at is these tweeters are way too much for a car truck door application?
On the pillars of my car. A pillar.
Why don't u test premium components like JL c7, STEG Mss series etc.
pioneer pro series ts-b400pro vs ds18 tw120 which would you guys pick?
Not a good demo. These are best at 5k to 22k Hertz. You have too much distortion feeding through. Believe me the pioneer pro gets unbelievably loud. But you got to filter them with eq. I'm running 4 pros 2x 3.5" and 2 4 inch. And I dont run the bass blocker. Using kicker kxa 400x4 with a Rockford dsr1 maestro for processing the clear sound
Overseers Twentyfour I want to learn about this so I can have very clear music in my house and in my car. How can I learn about these things you talk about?
Pioneer #1
Sir can you please help me I'm searching 6 Ohms Silk Dome Tweeter Max RMS, which one is best and from where I can get the item 🙏😇
Try some silk dome tweeters.
Im trying to put a nice music in my car I have all prv for my voice but I'm thinking about switching to 8, 6x9 pioneers and I order six of them tweeters what kind of pioneer amps are good for eight six by nines and the six tweeters.sorry to ask I'm just trying to make sure it sounds like it pro i was thinking about putting everything pioneer I already have the radio double DIN The Equalizer the base box all pioneer
Edwin Perez damn why so much tweeter
I recommend apocalypse silvester 6.5
Is it possible to still get the Pioneer? cannot find in UK
i cant stand this kind of high freq tweeter...any input for rock & tecno music tweeter or fullrange
Hi what about the jbl st400blk his it good for a car sound system!!!!
I just brought 4 prv tweeters. Will be hooking up soon and making a video.
They aight. I got these orion HCCA neo tweeters and its a night and day difference. But there out of stock everywhere since they filed bankruptcy
@@skankhunt-jc6yx , are you serious !!! They filed bankruptcy....wow
@@hakeem6929 that was the word , but I just recently seen them restock a few things so who knows
@@skankhunt-jc6yx ok then...lol
I have them on my front doors, ST600
Had to level them down, they're just too loud. 🙉
Hello i have same pioneer tweeters and for best hpf setting frequency it should be set at 5000 hz .m running it on pioneer 8604 which have hpf setting from 40-500 hz.kindly suggest me best frequency setting on my amplifier
Does it mater to conect + or - since one connection
What do you have crossover setting at?? That makes a big difference also
Sounds kinda low in frequency
Prv so7nds the best
I have 4 of the prv with the 6.5 deaf bounce m60v2 on a skar rp150 it's stupid loud
Prv is more musical the pioneer just plays higher iv had both in my ride and the prv just plays better over all
Yo what crossover networks do we need for these tweeters ?
Can you try the jbl selenium st 450 and eminence apt 80
Turnt Up rather get the pioneer they better than the jbl
Did you test the XTR Orion XTW950FD ?
Can i connect this straight to mid range speakers and then the amp or do i need a crossover ?
Yep you can do it it come with high pass filter Only problem it can be louder then your speaker or opposite
THE PRV TW700TI IS SMOOTHER BUT THE PIONEER HAS MORE like a crash sound
Edit: but both are good for sound battle
I need some 6x9 i least one and one Twitters and a big fan of you work
It's for Mobile PA applications
Pioneer sounds less harsh. Sounds smoother
Yes it does
The prv sounds like it has huge bump in the fr
Pyle PDBT19 vs Pioneer pro Series TS-B400PRO
they're both made in China. (i ithink) the Chinese copy everything LOL including the F35.
you have to take in account. that Pioneer is 4 ohm speaker. while the PRV is 8 ohms more is more ment for use with home audio. rather car audio.
At the same input voltage a - driver will draw 3db more power - driver. If both drivers have the same SPL at a given watt , yes, the 4 ohm - is going to sound louder . Both have the same efficiency.
that's why the Pioneer is louder.
What pioneer amp would you recomend for 2 tweeters just like in the video and 4 6.5 TS-M650PRO Pioneer all speackers are 500 watts max
pioneer 9604 or 9704
@@geerishramloll7632 thats a monoblock.. bass amp... unless u referencing the 8..604.. 8... 704..
Seems a typo n there.. 9 series are bass amps
Prv sounds beter? Or just me
Sound difference because different values in capacitor use the same value so we can hear the difference
Kinda scared to put these in my silverado now😂😂😂 that's loud af
B400(200 watt rms) or hertz st44(100 watt rms) but where the hertz price is 2x the price of the pioneer. Which one to choose???????
Pay for name or pay for product you chose)
@@LIFEINSPEED dont understand. What you suggest?? Indeed if u have been able to compare both.
@@LIFEINSPEED also, just saw that even though the hertz is 100watt rms, it has a lower(best) frequency and a higher sensitivity than the pioneer
I dont trust specs as u can see with my test specs dosnt mean nothing on most cases will test them soon
You dont need lower then pioneer gets on tweeter and depending what other speakers you running so on
@@LIFEINSPEED i need loud music. Have 4 1675v2 speaker and 4 ts20 tweeter. Now want to add 2 or 4 speaker and 2 tweeter in trunk. Either 4 pioneer 6900 pro (100watt each) or 4 hertz 165.1(200 watt each) or 2 sv200. 1(250 watt each). Abt the tweeter, either 2 pioneer b400 (200 watt each) or 2 hertz st44(100 watt each)
Can find this ones any wear
Why did you try subwoofer test
Which sound better?
Pioneer all day )
Prv all day
Can you install these tweeters directly to a amplifier?
Yes they all comes with capacitors
@@LIFEINSPEED These Pioneer tweeters do they sell them in 3.5”?? Or just in 4”??
I have 2 of prv tw700ti in my car and when I tell you people jump out of my car when I turn it up.
My pioneer just stop working
How do I fix or repair it?
Buy the diaphram . There should be a screw under the sticker on the bottom. Hold the bullet in place and remove. Then unscrew the tweeter flare. The blown diaphram pops right out . Then place the new one in and screw the tweeter back together . Wala... brand new. A diaphram should be like 15-30$
Better than drivers
How much po
Those tweeter's need to be crossed at 5Khz (abt the end of some people's hearing). What speaker do I cross then to?
Pioneer is not available for sale anywhere online. Only through pioneer direct and for $70 each. Not $46. At that price prv is the better choice for $40. MHO
Yes everything Im reviewing after while sold out and price goes up
Yes dont think get prvs same sound just design is different
@@LIFEINSPEED Yes I got the PRV's since long ago. would've liked to try those pioneer s as well. they soung good
@@hitemup85 yes. discontinued there
eBay for $35 a piece. Look harder
That pioneer plays up to 27khz the prv only 20 kHz the higher the kHz the finer amd sweeter it will play I don't care about mids that's not a super tweeter job to play mids pioneer wins full stop
#Mike wich Speakers 6×9 are the best and good duality and good sound which one is your recommendation for the best speakers ???
Jbl and kappa all day
@@LIFEINSPEED #wich Jbl ??
@@LIFEINSPEED JBL gto939 corrects ??
@@1cesarrobles jbl gto 939
@@LIFEINSPEED thank you #Mike I really appreciate them.
Hello friend i want 6.5 inch coaxil speaker hows jbl gto 629 or dd ex 6.5
Ill chose JBL all day
@@LIFEINSPEEDcan you hook them up directly to a pioneer radio or do i need a amp
On Brazilian Chuchero.
Puerto Rican bro..... puerto rican.
PRV 8 ohms, pioneer 4 ohms 🤔
I'm gonna use it for a boombox
On this video Mike says the pioneer 4in Pro tweeter is Amazing 😲and it's the one he prefers. In a previous video Mike say He DOESN'T like the pioneer 3.5 Pros tweeters 😔...😒
Pioneer win?
Get you a PayPal account and I will donate and I bet others will to.
That's a Great Idea Bro, Never thought about it. Let me try it Links will be on the Description
esos tipos balas de cualquier marca, son para destrozar los oidos
Pioneer wins
I ordered 2of them
Now ull enjoy real good sound )
@@LIFEINSPEED WOW they heavy with a big magnet now im waiting on my 4 pioneers 6 .5 to go with them babies can't wait to hear the clarity of them mids and highs thanks
Man who always test prv
Hobart Expressway
PRV ALL DAY, comparison over :p
The prv sounds better
Pioneer hands down the prv sucks
PRV is for SPL systems. That pioneer wont keep up. Also, PRV is at a higher ohm rating, which changes everything.
@@sethh8892 he capped it to even the impedence
Ray Island
Bode Turnpike
Those aren't the right value capacitors on them!
The PRV sounds louder
That's waaay too much tweeter for me.
You cannot test with different capacitors it doesn’t make sense.
I can not? I just did you just watch the videos LOL
@@LIFEINSPEED you said they had different capacitors.
WINER PIONEER : 1 FAILURE PRV : 0