PTP Lava Blanket INSTALL & TESTING (Turbo & Downpipe) // 10th Gen Honda Accord
HTML-код
- Опубликовано: 25 авг 2024
- Do Turbo Blankets really add any performance benefit? I'll take you through the How-to Install of the PTP Lava Blanket / Turbo Blanket for our Honda Accord project car, the 2019 Honda Accord 2.0. Will the turbo blanket and downpipe blanket from PTP really help in reducing the engine bay heat? We perform before and after temperature tests as part of our Turbo Blanket review. Whether you have a Honda Accord 1.5 or 2.0, 6-speed manual, or 10-speed AUTO, you may find performance benefits in installing a turbo blanket and downpipe blanket from as a performance mod for your 10th Gen Honda Accord. Whether you buy a turbo blanket from Funk Motorsport, Full Race, Mishimoto, or PTP, the performance claims include; turbo blankets help increase turbo spool-up / reduce turbo lag, turbo blankets decrease air intake temperatures resulting in horsepower gains, and turbo blankets increase the longevity of underhood parts / components by reducing the engine bay air temperatures. Let's find out if a Turbo Blanket & Downpipe Blanket from PTP are the right mods for YOUR 10th Gen Honda Accord!?!
Looking for ways to gain horsepower on YOUR 10th Gen (2018, 2019, 2020, 2021, 2022) Honda Accord 2.0 or 1.5 turbocharged car - this video / channel will give you the information you need to help you make an informed decision regarding the best modifications for your 10th Gen. Honda Accord 2.0 or Accord 1.5 project car!
#hondaaccord #modifiedcars #prl #fk8
Checkout the NEW Merch (Etsy)
www.etsy.com/s...
Become a channel MEMBER*, click on *"JOIN" under any video to see unique features and benefits!
Amazon Affiliate Links:
Dragy Performance Meter - amzn.to/3OHNhOQ
KTUNER V2 ECU Flash Tuner - amzn.to/3cUyDX8
Mishimoto Intercooler - amzn.to/3yjMrTF
PRL Intercooler - amzn.to/3xVUnsR
Associated Channel Videos:
Do ENGINE MOUNTS Improve Traction on the Honda Accord? [Motor Mounts, Engine Mounts, Torque Mounts] - • Do ENGINE MOUNTS Impro...
PROs & CONs to INSTALLING Motor Mounts on YOUR 10th Gen Honda Accord!?! - • PROs & CONs to INSTALL...
How-to improve TRACTION of YOUR modified car when RACING - quickest 0-60mph & 1/4 mile times! - • (How-To): Improve TRAC...
(REVIEW): Michelin Pilot Sport 4S Tires - Still the Performance Tire LEADER!?! - • (REVIEW): Michelin Pil...
1/4 Mile TRACK TEST! - How FAST is the NEW 27WON KURO (FK8 Hybrid Turbo)? // 10th Gen Honda Accord - • 1/4 Mile TRACK TEST! -...
FAILED Testing Session! 0-60mph TESTING - 27WON KURO (FK8 Hybrid Turbo)! // 10th Gen Honda Accord - • FAILED Testing Session...
(How-To): Automatic Transmission Fluid (ATF) Change! // 10th Gen Honda Accord - • (How-To): Automatic Tr...
Ethanol (E85) Tuned Big Turbo Honda Accord - DYNO TESTED! // 10th Gen Honda Accord - • Ethanol (E85) Tuned Bi...
Honda Accord Maintenance Schedule Changes! // 10th Gen Honda Accord - • Honda Accord Maintenan...
27WON Kuro Turbo (FK8 Hybrid Turbo) - DYNO TESTED! // 10th Gen Honda Accord - • 27WON Kuro Turbo (FK8 ...
Visit the Channel for MANY more VIDEOS...
DISCLOSURE: This video and description contains affiliate links, which means that if you click on one of the product links and purchase an item from Amazon (and/or others), I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
DISCLAIMER: Due to factors beyond the control of The Lemon Factor! LLC (Chad), I cannot guarantee against improper use or unauthorized modifications of this information. The Lemon Factor! LLC (Chad) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Lemon Factor! LLC (Chad) recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of The Lemon Factor! LLC (Chad), no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Lemon Factor! LLC (Chad).
I installed the same set a few weeks ago. I'm happy with it. Helps spool on my FK8 turbo. Not sure how much it helps temps, but every bit helps
You actually notice a difference in spoolup? I don’t notice any change 🤷♂️
@@TheLemonFactor while I have no hard data, I perceive quicker spool. I also find it easier to get the turbo whistle with less throttle input. Could be in my head 🤨
it’s going to be a cold winter. make sure get a blankey for your turbo 👍🏾
🥶😁
How much did all the mods cost?
Love the content keep it up
Why not just pull the housings and downpipe and have them ceramic coated?
Should’ve done thermal images aswell
Thanks for the video. I was gonna ask you. Your Honda has more power than stock. What engine oil do you use now ? 0w20 or another ?
I am currently running Pennzoil Ultra Premium 0w-20.
@@TheLemonFactorI’m pretty sure with an after market turbo you’re supposed to run thicker oil. Like 5w-30 I believe
Hi! Im currently doing a ctr swap with my dp and civic type r turbo inlet, I noticed you didnt utilize the accord heatshield or/and the ctr heat shield. instead using the blanket. assuming you've done testing, this must be a better solution? I was going to drill a hole through my accord heat shield so the 02 sensor would line up, but also ordering the ctr heatshield to put the blanket on top. but u didnt, so I guess it works?
Do you have a insulation video for FK8 Titanium Turbocharger Inlet Pipe Kit ?
You can find how to install the inlet in the turbo install video… (How-To): 27WON Kuro Turbo (FK8 Hybrid) Install // 10th Gen (2018-2022) Honda Accord
ruclips.net/video/qLUWie0LOvw/видео.html
Hey Why not try get Design Engineering Reflect-A-GOLD High-Temperature Heat Reflective wrap on your air cold intake maybe it would help too. you can test on gold tape work or not. thanks
That's a possibility, but I really don't think the air gets heat soaked from the air inlet pipe, thus I doubt it will add any significant power benefits.
@@TheLemonFactor I used the heat wrap on the v2 box and have it on the inlet I’ve dropped around 3-4 degrees ambient temperature
hi this doesn’t have much to do with the video but i have a 2019 accord 2.0t and just put the stage 2 base map on it and was wondering what kind of K count i should be looking for like what number do i want be around and what does it mean
Email me directly and I’ll provide you with what I know.
Hey chad can you link the Mitsmoto blanket
checkout HeeltoeAuto, he's got Mishimoto turbo blankets and a bunch of other great things! Ask for Marcus and tell 'em I sent you!
hey bro, not sure if your still using ktuner, if you are can you share what quick adjustments settings you currently using please? spent a night googling and no one has really spoke to what settings they like using... at least for accord 2.0
Just off the top of my head, I have the lightest throttle padding, and early spool enabled 👍
@@TheLemonFactor appreciate you bro, maybe going over those settings and your thoughts behind the choices I think would make great content. All forums and vids don't highlight it at all .
Hey u have a part # for the blankets
If you put the down pipe on tighter, would it work better?
I doubt it as I don’t think you can get it any more fitting than what it is now 🤷♂️
@@TheLemonFactor can you make a video how to install the prl inlet
You can find out how to install the air inlet by checking the video in which I installed the Kuro turbo…👍
How did you get the turbo heat shield off
Checkout this video for the removal… (How-To): PRL DOWNPIPE Install! // 10th Gen (2018+) Honda Accord
ruclips.net/video/Zbp6EEHqZEQ/видео.html
did you take a before measurement?
Yes, it’s in the video
Hey chad do you have any links to other blankets, or can anyone find specs on the turbo size to find a blanket. Id like to do my research first, I checked identifix Alldata oecreparlink and nothing.
I call out a couple brands in the videos description. Checkout there websites for details 👍
@@TheLemonFactor thanks Sir🤌🏽
Is there any concern about the turbo blanket damaging the turbo itself over continued usage?
I don’t see why it would be 🤔🤷♂️. Is there a specific reason why you’re concerned?
@TheLemonFactor one video out there said the turbo would peal away like potato chips: the turbo casing itself
ruclips.net/video/GuVAzORoUMQ/видео.htmlsi=2ZoGrMUuJ3p6edCI
I've never seen, or heard this happening with a turbo blanket. However, I have heard of issues related to wrapping exhaust manifolds, downpipes, etc. in which moisture can find its way into and be trapped by the wrap thus causing premature rusting of metals.
@TheLemonFactor cool thank you. I trust you so yeah I'll be purchasing the blanket. I'd love to share my build with you
@thosetwodudes if you’d like to email me, that would be great 👍. You can find my email address under the About section of The Lemon Factor RUclips channel page.
if you don’t like the blankets you can give it to me lol
I'll be sure to keep you in mind ; )
Guys Doy you have the Fk8 Air inlet pipe Install video ? It’s the PRL Inlet for TypeR right ?
You can find out how to install the FK8 inlet pipe as part of this video… (How-To): 27WON Kuro Turbo (FK8 Hybrid) Install // 10th Gen (2018-2022) Honda Accord
ruclips.net/video/qLUWie0LOvw/видео.html
Did you just use the FK8 turbo blanket, or a universal type one?
FK8 turbo blanket and downpipe blanket 👍
Running the same setup, my temps rose which kind of makes sense. Usually sat at three bars on temp gauge and now I’m at 4. Could also be since I run e85, and had to disable ECT1
@@labelmeaking9408 I’ve always sat at 4 bars?
@@TEAracing I’ve always sat at three in Arizona, and Vegas. Once all those parts were installed it hit 4 within 5-10 mins of driving. 2019 2.0t, 18k miles.
@@labelmeaking9408 interesting in Midwest always at 4 and a 19 2.0t
would this fit the stock turbo?
As I have an FK8 based turbo, the oxygen sensor placement is different than a stock Accord turbo, which means it will not fit. With that said, PTP may sell a turbo blanket that could fit the stock Accord turbo 🤔🤷♂️
ptp PN# FPRO35-128-01 is the number for stock accords. Its made for 1.5 civics but has the 02 sensor in the right spot