Zwrap Tutorial: How to Combine Sculpted Geo and Scan Data
HTML-код
- Опубликовано: 11 дек 2022
- UPDATE 1-28-2023: As of recently, it was brought up to my attention that Zwrap is not supported in Zbrush 2023. Let's hope that is resolved soon. For all those, such as myself, who are still using 2022 and earlier, we can still benefit from this awesome plugin. cheers!
Here is a brief walk through of how I combine scan data plus sculpted geometry. When using Zwrap, you wrap preexisting geometry/topology to the shape of your model. However, what if you want to combine sculpted details along with the scan data. This tutorial will basically show you how I use layers to make that possible. It's basic, it's simple, it works.
For those who previously asked for me to explain this process, sorry for the delay. Work, life and everything else in between made 2022 a busy one but I always had intentions of making this video and explaining the simple method I use.
For more content:
www.artstation.com/somuch3d
/ somuch3d
Zwrap:
www.russian3dscanner.com/zwrap
3D Scan Store:
www.3dscanstore.com 
Кино
Great work! When projecting scan data, any reason why u use smooth brush instead of morph brush?
Hello and thank you for the kind words and support. As far as your question, normally at this stage, I've just created a new surface details that are transferred from a separate mesh. Thus changing the surface and with new topology. Which means no previous state for me to have saved a more target. That said, i do save a morph target with that tertiary detail/data so that i have it saved by painting it on a new layer. I hope that makes sense as i type it out, haha.
@@somuch3dthank you for reply. It's clearer now! :) When I project stuff on mesh, I store MT before projecting so when I'm fixing projected details morph brush returns to original mesh, cuz sometimes smooth brush wont fix it that well .Sometimes I cheat and I use smooth brush haha
A scan and a scupt 3D printed. Poured rubber with best of both worlds?
Dear instructor，I've one question. As I can see, there are two heads in the subtools and both have useful details so will you transfer the detail textures from one to another or just merge them together in zbrush (does this make sense btw?) in order to get into the next steps such as rendering. Thanks a lot.
transfer details from one to another
Yeah, as the reply stated, we're transferring surface details from one mesh to another.
hello. what is the purpose of combining scanned and sculpted? or what are some uses? sorry i am new to 3d. is it just mainly for adding details super fast?
Hello and thank you for not only watching my video but for your question as well. So there are a few reasons for taking this approach. For some, it yields great results with less time. Also, typically in the gaming industry, working under in a collaborative effort with multiple departments and a production timeline, taking the time to create tertiary details and full custom skin details is a luxury you don't often have. So this alleviates much of that time. However, you still want the model to have its own identity or specific details that make it unique and not just a perfect skin match to scan data. So this helps create a blend of custom detail and fine tertiary details. Personally, when I have the time, I prefer to create /sculpt my own details. From wrinkles, pores and imperfections, I find it more rewarding and I enjoy the process. 🙂🤓
@@somuch3d thanks so much - will try these techniques soon!
hey, I have a question for u.
Lets say I have a good retopo model with mouth bag and all and I want to wrap it around a zbrush model sculpted without a mouth bag. Both have closed mouth.
I'll pin all the point but will the mouth bag get where it should be ?
Hi! so sorry for my delay in response. I've actually tried doing that some thing before and it caused issues as zwrap didn't know where to put that geo and gave me wonky results. There are two solutions I would try. First one, mask the mouth in zbrush first before trying to wrap and that should prevent it from trying to wrap to geo that doesn't exist. My other would be, to detach or cut the edges where the mouth bag starts and zwrap the rest. Once you have a good wrap, stitch the mouth back. See if that works. Thank you for the support as well, my friend!
@@somuch3d it's ok, thank you, i will try with the trial version
After sculpt it and wrap it with a 3dscanstore scan geometry and then add some extra details by using texturing xyz maps for skin pores and wrap it process tutorial
If u want resources i am gonna give u
do the same with a body scan!!
hello sir, I am unable to understand what you did after plotting points in zwrap what settings you did can you please tell us what to do after plotting points because I am not able to get the scan detail to my mesh after plotting details, thanks
Hi! Thank you for your question. So I was trying to not make a full zwrap demo since there are quite a few that can explain much better than me, I'm sure. Haha. That said, upon plotting points in zwrap on both respective models, it's a matter of pressing the "wrapping" button at the bottom and once at that screen, press "start wrapping" in the top left. I'll drop a link below for a quick demo of this. I hope this helps, my friend. 🙂
Watch this quick video:
ruclips.net/video/uGvofMIC9Ak/видео.html&ab_channel=CGPlugins
Thank you so much now I am able to transfer the details.. much appreciated 🙏
I lost all the scan dettails using zwrap. I don't know what is going on
I have a problem, first mesh have a tongue, and wrap fucked up.
How can I remove the tongue from wrapping? or hide or what?
Thanks
Thank you for your comment and question. Yes, easy solution. Mask off the area like the mouth so it's not included in the wrapping process. I forget to do this sometimes as well. 😉
@@somuch3d yeah I've solved thanks, i'm new to zBrush, I moved from Blender recently, zBrush UI make me crazy.
Thanks for your answer!
Absolutely. Yes, the zbrush ui can be a bit jarring at first but customization really helps make it your own. Happy zbrushing and thank you again for your support!
hi, im a college student in Korea and I've a question. Do you know the reason why when I select the point and apply a wrap, the mouth part doesn't apply beautifully and breaks?
I'm asking you a question because there aren't people to ask here.
you have to use the select polygons node to isolate polygons that you don't want to wrap and want to stay in position like the inside of the eyes and the mouth bag
Leoking is right. Another easy method is masking the area you don't want to wrap. Great question, i too have had the mouth bag transfer effortless sometimes and other times, not so much.