Bout to purchase an 02 estate. That kit looks like a good value for $15 (I got it on sale) also that Kenwood head unit is pretty good too. I have one in one of my trucks.
thanks man! I try to make them easy to follow and provide all the info required to do the install from beginning to end. The more you do the better they get right!
great tutorial! theres also adapter cable kits available so u won't need to solder. btw the speed sensor cable is compatible to most standard radios. it will change the volume depending on the driving speed. pretty cool um annoying feature 😁
Good morning, I want to put a Tokai brand car radio model: LAR-82B on a Ford Focus diesel year 2003, this is possible with an adapter. Thank you for your response.
is it like all othet radios? any car radio will fit most vehicles, exceptions are Asian made radios as they do not fit the standard North American vehicles.
I have a 2001 Ford Focus SE and it has an aftermarket radio that needs to be replaced. It was there when I bought it. I believe they installed the same dash kit you're using. My question is, is there a special tool I need to remove the radio? Great video. It's very helpful. Thanks.
You may not need any special tools, you may need a set of release keys if anything. Most units are screwed to the dash which means you normally remove the front part of the radio dash kit to access it. Some are held by the sleeve in place for which you need those keys. Send me a PM with your email so I can send you a pic to what I am refering to if you need.
I'm looking at a 2004 ford focus, and an aftermarket stereo is a huge breaking point for me. I'm new to all of this, so I was just curious whether or not I needed to buy the wiring harness and do all of the soldering and shrink wrapping, or if the harness in the car already would fit in an aftermarket stereo.
you don't need to buy the harness, however a lot of vendors on ebay will include the harness with the dash kit. The harness itself is not to expensive. You can do the install by hard-wiring straight onto the oem harness, you will just have to figure out which wire is which.
I did not install an adapter for the steering wheel controls because this car did not have any. If yours has it, you can use the ASWC-1. Instructions as included to easier install - I recommend that one because I've used it the most.
here you go man, a couple of links. www.ebay.com/itm/Car-CD-Player-Repair-Key-Tool-Radio-Removal-Keys-Tool-for-Ford-Peugeot-Renault/372371747268?hash=item56b315f1c4:g:pFsAAOSw5x9bTdb-:rk:14:pf:0 www.ebay.com/itm/Ford-OEM-Radio-Removal-Tool-Release-Tools-Key-Dash-LandRover-Mazda-Saab/172856179928?epid=23017011920&hash=item283f07fcd8:g:rA0AAOSw39FaBMB6:rk:47:pf:0
We have the same car model.I would like to replace my stereo to but I’m not sure what kind of wire harness and to buy , and the radio what model is that? Thank you in advance..😊
Hi, best way to know which harness you need is to remove your radio and check. Most are the same but a few are different. Radio was a kenwood. Let me know and I can get you links to all you will need.
Can you control the radio from the control remote on the side of the wheel cuse i have the similar radio but i did not connected the remote wires to control the radio from the remote on the side of the wheel that are for original radio
You can yes, however, you will need an adapter for them to work. Either a aswc-1 or pac. The unit would need power, ground, and connect one wire depending on the radio you installed.
you can use anything you want as long as they are small and long enough to push out the tabs. I have used small flat head screw drivers before I go this ones.
Thanks, this is really helpful! What did you do with those harness wires that are not used, just tape them up? Is it okay to remove them from the harness altogether?
+mrmclemens - no problem, glad it hepls you. I just taped them off, you can cut them off altogether but I would just leave them taped off in case you add something later where you may need them.
So I’ve just picked up an 03 focus with an aftermarket single din already in it, but I have a double din I am going to put in, how exactly would I take the old radio out? Seeing you use those removal tools on the stock radio worries me because the aftermarket one currently in the car has no such holes
You need to use a pair of "keys" for that. They come with the radio, your new one should have a set with it. Look in the package where the manual is and they should be there. Remove the trim around the radio and insert the keys in the middle-outside, they click into place and you can pull the radio out.
I've had an old Kenwood in my 2004 Focus SVT for a few years, the previous owner installed it. I went to put the new Kenwood one in(it's not very old, got it from a friend), and the blue/white wire is connected to the current Kenwood. From what I can find it's for a power antenna, and I have the stock antenna so I have no clue what it's for. Its "T"ed in with 2 other wires, doesn't make any sense to me. I'm ordering all new harnesses since I already need the harness for the new Kenwood, I am just wondering why the blue/white wire is connected to my old Kenwood. Any ideas? Also, the new Kenwood is a KMM-BT318U, and has a different plug then the current. I'm struggling to find it, any websites that I could get a part number off of? Thanks for any info!
I could not find a Kenwood plug for this new Kenwood. Had to get a Pioneer plug and move 2 wires around. Works great though, spent $11 and have all new wiring instead of the old junk. The blue/white wire is for my sub, it didn't work without it.
There is no other good way, reason is the metal tabs that hold it in the dash. Unless you're able to get behind the radio to push the tabs in to remove it. You can also modify a coat hanger or small screw drivers and use that
Depends on your vehicle, these models have two different types. Best way to know is to remove the radio. I have links to both types in the description box.
I have a 2002 Ford focus and I have a jvc radio and I do not know how to turn it on... I have pressed every button... But when it's on, I cannot bring down the volume or change it to the radio instead of CD... Any ideas why it's like that?
I have the 2004 Ford Focus MK1. I was planning to install a 2 DIN radio but from what I saw in your video, it would not fit. I understand that the size supported is 1.5 DIN and not 2 DIN for the MK1 Focus. Is that correct? Is it possible to install a 2 DIN radio the same way or will it not fit? Also, do you know the sizes of the door speakers for the MK1 2004 model? I know they are oval shaped and that they are different size on the front doors compared to the rear door ones. Do you know the official speaker sizes that are supported? Thanks a lot!
Hey man, sorry for the late reply but I was doing some searching for you. It looks like you can install a double din into your MK1 Focus. You would have to do some trimming to the main bezel. Here is a link to a how to and video: www.focusfanatics.com/forum/car-audio-sync-myford-touch-electronics/231948-how-fit-double-din-00-04-focus.html As for the speakers I would visit crutchfiel and enter the details for your car to see what it uses, I have looked it up but there are differences between the trim levels. Hope this helps you.
I have everything plugged in but not getting my radio to turn on, it appears the power is not going into it. Do I need to ground something or is the order of hooking everything up important? Using a kenwood radio. Thanks if you can help
+crabmeat88 - check your ground wire as well as the acc. Also check the fuses on the radio and fuse panel. Did you use an adapter harness or did you wire it up straight to your factory harness?
@@charlessimonic950 - I have the link in the description box, it will be the first link from ebay. Ya that sucks, hopefully you can return it and they can exchange it for the correct one.
I didnt do anything as this car did not have it. If yours has a power antenna it should be a blue wire and needs to be connected to the power antenna wire on the radio harness. Not sure exactly what they labell it.
I installed an aftermarket radio and had all wires hooked up but wasn't getting any sound took it out and put factory radio in and got sound any ideas of what it could be
I did show some of it, you will need the ford (or other tool) to remove the radio by inserting them into the opening as I showed. Then slightly pull out and towards you.
All you need to do is to insert the removal keys, "click" them in, push outward and pull back. It can take a few tries as the brackets that hold the radionin can be very stiff.
You can get them from amazon, ebay. You should be able to find some at a local radio shop or some automotive parts retailers as well. Here is a link from amazon Canada... www.amazon.ca/Baosity-Blaupunkt-Pieces-Stereo-Removal/dp/B07D9L2KFD/ref=sr_1_14?crid=52JLT11HYV79&dchild=1&keywords=ford+radio+removal+tool&qid=1598411667&sprefix=ford+radio+%2Caps%2C189&sr=8-14
@@esqu3l3to At no point in the video did you mention that the Blaupunkt stereo needed the different deck kit and wiring harness. Wish I hadn't spent the extra money on the shit that doesn't fit.
+Osaigbovo Ahanon - you can get the removal tools from ebay or even a local car audio shop including places like canadian tire *in Canada* or similar places in the U.S.
hey man sorry for the late reply, if your focus has steering wheel controls then no they will no longer work if you replace your stock radio, however you can get an adapter to have them work with the new radio. you can check at axxessinterfaces.com/ to see which one you would require.
Thanks for the response man! I'm still waiting on a crappy eBay seller for my dash trim seeing how I got sent the Ford F150 kit instead of the Focus. Got the first kit in a matter of days, been at it for about a month by now trying to get them to send the right kit... so there was no rush in your reply; sadly for me :')
you can get them on ebay or almost any car parts store. Here is a link to a set for cheap... www.ebay.com/itm/2x-Car-Stereo-Radio-Release-Removal-Tool-Key-For-Audi-VW-Ford-Mercury-Lincoln-/291558917955?hash=item43e2440743:g:iv8AAOSw2gxYxTNk&vxp=mtr
@@esqu3l3to I bought the plugs directly from ebay. I don't think it fits the pins. I really can't get him to start ... I don't know what to do with him. I mention that I have a ford focus in 2004 and the cassette player is still kenwood. Just like in your video
![YoungBoy Never Broke Again - Sneaking [Official Video]](http://i.ytimg.com/vi/1ILUps2zDFU/mqdefault.jpg)
Make sure to unplug the negative charge on your battery.
That is correct, always discinnect the negative on your battery before doing any install.
Thank you for mentioning that even though you said this 5 years ago lol. I just got this car about to out my radio in
all good lol
oh nice, gotta have a good radio for somw good tunes
Dar comenzile pe volan merg?
Thank you! Needed this video because I have just purchased a 2000 Ford Focus station wagon. :)
Glad it helped you out :)
Bout to purchase an 02 estate. That kit looks like a good value for $15 (I got it on sale) also that Kenwood head unit is pretty good too. I have one in one of my trucks.
Great tutorial bro! Being doing this for years and was interested in your video, watched it and am greatly impressed.
thanks man! I try to make them easy to follow and provide all the info required to do the install from beginning to end. The more you do the better they get right!
Great tutorial- exactly the job I’m going to help my grandson with.
thanks! 🍻
great tutorial! theres also adapter cable kits available so u won't need to solder. btw the speed sensor cable is compatible to most standard radios. it will change the volume depending on the driving speed. pretty cool um annoying feature 😁
Thanks man! 👊 Correct, some vehicles do have the speed sensor. I personally never use them, I do to find them annoying.
Do you have a link to the adapter cable kit?
Harness adapters:
www.sonicelectronix.com/item-1654-Scosche-FD02B.html?rfsn=3776605.981f04
Peerless- can you send me the link for the adapter cable kits you don’t have to solder?
Thank you so much for your time. I followed your instructions and it worked perfectly! :DDDD
Right on man! 👍
no clock in the dashboard was fords biggest mistakes bringing the focus to the USA
I am so used to seeing the time on the radio but most just dont show the time unless they are turned off even factory.
I put my radio thanks for the help I got everything working nice video man
Rayon Gunner - awesome man, glad it helped you out.
Good morning,
I want to put a Tokai brand car radio model: LAR-82B on a Ford Focus diesel year 2003, this is possible with an adapter.
Thank you for your response.
is it like all othet radios? any car radio will fit most vehicles, exceptions are Asian made radios as they do not fit the standard North American vehicles.
I have a 2001 Ford Focus SE and it has an aftermarket radio that needs to be replaced. It was there when I bought it. I believe they installed the same dash kit you're using. My question is, is there a special tool I need to remove the radio? Great video. It's very helpful. Thanks.
You may not need any special tools, you may need a set of release keys if anything. Most units are screwed to the dash which means you normally remove the front part of the radio dash kit to access it. Some are held by the sleeve in place for which you need those keys. Send me a PM with your email so I can send you a pic to what I am refering to if you need.
Would this work with a 2005 Ford Focus CL (European model, similar to yours)?
Fantastic video... Gracias.
De nada 🤛
I'm looking at a 2004 ford focus, and an aftermarket stereo is a huge breaking point for me. I'm new to all of this, so I was just curious whether or not I needed to buy the wiring harness and do all of the soldering and shrink wrapping, or if the harness in the car already would fit in an aftermarket stereo.
you don't need to buy the harness, however a lot of vendors on ebay will include the harness with the dash kit. The harness itself is not to expensive. You can do the install by hard-wiring straight onto the oem harness, you will just have to figure out which wire is which.
You didn't show how to remove the radio removal tool from the old radio. How do those u shaped tools come out? THanks
To release them, just let them face straight out then wiggle them out.
Did you manage to make the radio control buttons on the wheel to work?
I did not install an adapter for the steering wheel controls because this car did not have any. If yours has it, you can use the ASWC-1. Instructions as included to easier install - I recommend that one because I've used it the most.
Hey can you link me to those little loop things you used to release the OEM radio?
here you go man, a couple of links.
www.ebay.com/itm/Car-CD-Player-Repair-Key-Tool-Radio-Removal-Keys-Tool-for-Ford-Peugeot-Renault/372371747268?hash=item56b315f1c4:g:pFsAAOSw5x9bTdb-:rk:14:pf:0
www.ebay.com/itm/Ford-OEM-Radio-Removal-Tool-Release-Tools-Key-Dash-LandRover-Mazda-Saab/172856179928?epid=23017011920&hash=item283f07fcd8:g:rA0AAOSw39FaBMB6:rk:47:pf:0
We have the same car model.I would like to replace my stereo to but I’m not sure what kind of wire harness and to buy , and the radio what model is that? Thank you in advance..😊
Hi, best way to know which harness you need is to remove your radio and check. Most are the same but a few are different. Radio was a kenwood. Let me know and I can get you links to all you will need.
Can you control the radio from the control remote on the side of the wheel cuse i have the similar radio but i did not connected the remote wires to control the radio from the remote on the side of the wheel that are for original radio
You can yes, however, you will need an adapter for them to work. Either a aswc-1 or pac. The unit would need power, ground, and connect one wire depending on the radio you installed.
Do I have to get the removal things or can I use some type of tool? I just don't wanna waste money, ya know.
you can use anything you want as long as they are small and long enough to push out the tabs. I have used small flat head screw drivers before I go this ones.
Thanks, this is really helpful! What did you do with those harness wires that are not used, just tape them up? Is it okay to remove them from the harness altogether?
+mrmclemens - no problem, glad it hepls you. I just taped them off, you can cut them off altogether but I would just leave them taped off in case you add something later where you may need them.
is this radio a KDC-4057U? because it's the same radio i have in my Bora
I cant remember which model it was tbh
So I’ve just picked up an 03 focus with an aftermarket single din already in it, but I have a double din I am going to put in, how exactly would I take the old radio out? Seeing you use those removal tools on the stock radio worries me because the aftermarket one currently in the car has no such holes
You need to use a pair of "keys" for that. They come with the radio, your new one should have a set with it. Look in the package where the manual is and they should be there. Remove the trim around the radio and insert the keys in the middle-outside, they click into place and you can pull the radio out.
@@esqu3l3to okay great thank you. I honestly didn’t think you’d reply on a 3 year old video haha I just hoped
I reply no matter the date, as long as I get a notification cause sometime I don't.
I have a 02 Ford Focus and wonder can I do the same and what kind of stereo is that?
Of course you can, I installed a kenwood radio in this one. If you Ave more questions you can message me through my Facebook page on my channel.
Bonjour, super vidéo, mais faut-il débrancher la batterie ?!?
Et faut-il déconnecter les cales dans un ordres suivants où non ?
Hello, yes disconnect your negative battery terminal to avoid any short circuits. There is no specific order to disconnect the radio harnesses.
@@esqu3l3to very thanks☺️
I've had an old Kenwood in my 2004 Focus SVT for a few years, the previous owner installed it. I went to put the new Kenwood one in(it's not very old, got it from a friend), and the blue/white wire is connected to the current Kenwood. From what I can find it's for a power antenna, and I have the stock antenna so I have no clue what it's for. Its "T"ed in with 2 other wires, doesn't make any sense to me. I'm ordering all new harnesses since I already need the harness for the new Kenwood, I am just wondering why the blue/white wire is connected to my old Kenwood. Any ideas?
Also, the new Kenwood is a KMM-BT318U, and has a different plug then the current. I'm struggling to find it, any websites that I could get a part number off of?
Thanks for any info!
I could not find a Kenwood plug for this new Kenwood. Had to get a Pioneer plug and move 2 wires around. Works great though, spent $11 and have all new wiring instead of the old junk. The blue/white wire is for my sub, it didn't work without it.
Ok awesome, sorry I didnt reply I just beem away.
How can I remove the OEM head unit without the special ford tool that you used?
There is no other good way, reason is the metal tabs that hold it in the dash. Unless you're able to get behind the radio to push the tabs in to remove it. You can also modify a coat hanger or small screw drivers and use that
I’ve been looking for the right wiring harness to is. Which one is it?
Depends on your vehicle, these models have two different types. Best way to know is to remove the radio. I have links to both types in the description box.
I have a 2002 Ford focus and I have a jvc radio and I do not know how to turn it on... I have pressed every button... But when it's on, I cannot bring down the volume or change it to the radio instead of CD... Any ideas why it's like that?
what model of JVC do you have? It may be locked from all functions as some radio do by pressing a couple of buttons at the same time.
You can install this with only having stock speakers right?
Thats correct, you can install a new radio without having to upgrade your speakers.
Where did you put those 2 black plates ?
I did not use them since I used the sleeve that came with the radio.
Can find the right harness anywhere
Great video
good presentation
Where can I get the stereo removal tool
You can get them online or most car audio shops will have them.
I have the 2004 Ford Focus MK1. I was planning to install a 2 DIN radio but from what I saw in your video, it would not fit. I understand that the size supported is 1.5 DIN and not 2 DIN for the MK1 Focus. Is that correct? Is it possible to install a 2 DIN radio the same way or will it not fit? Also, do you know the sizes of the door speakers for the MK1 2004 model? I know they are oval shaped and that they are different size on the front doors compared to the rear door ones. Do you know the official speaker sizes that are supported? Thanks a lot!
Hey man, sorry for the late reply but I was doing some searching for you. It looks like you can install a double din into your MK1 Focus. You would have to do some trimming to the main bezel.
Here is a link to a how to and video:
www.focusfanatics.com/forum/car-audio-sync-myford-touch-electronics/231948-how-fit-double-din-00-04-focus.html
As for the speakers I would visit crutchfiel and enter the details for your car to see what it uses, I have looked it up but there are differences between the trim levels. Hope this helps you.
Thanks a lot for your time and effort, appreciated. I will look into the links and get back to you with news..
I have everything plugged in but not getting my radio to turn on, it appears the power is not going into it. Do I need to ground something or is the order of hooking everything up important? Using a kenwood radio. Thanks if you can help
+crabmeat88 - check your ground wire as well as the acc. Also check the fuses on the radio and fuse panel. Did you use an adapter harness or did you wire it up straight to your factory harness?
Is there anything to be obsered because of the steering wheel remote control?
If yours has steering wheel controls then you will need an adapter for them to work
What is the name of the wire harnesses you used the one i ordered said it should fit my 2002 ford focus but it does not
I wish i would have seen this video before i bought one of everything from Amazon!
@@charlessimonic950 - I have the link in the description box, it will be the first link from ebay. Ya that sucks, hopefully you can return it and they can exchange it for the correct one.
What did you do with the power antenna
I didnt do anything as this car did not have it. If yours has a power antenna it should be a blue wire and needs to be connected to the power antenna wire on the radio harness. Not sure exactly what they labell it.
Can you tell me if this car has speakers?What I mean is that if the audio doesn't come only from the radio
Yes it has four (4) speakers
@@esqu3l3to Oh ok,thank you.
Pe tri Most cars never have a speaker in the radio itself. I have never seen it anyway. Speakers are always in the doors.
I installed an aftermarket radio and had all wires hooked up but wasn't getting any sound took it out and put factory radio in and got sound any ideas of what it could be
Also mine is a 2001 Ford Focus
you got no sound from any sources? the only thing I can think of is your speaker wires or the connector to the radio was not pushed all the way in.
What's the part number on the harness? I cant find the right one for my 04, and that harness looks to he the one I need.
here is a link, just make sure to change the submodel if needed:
www.metraonline.com/part/70-1770
Why would you not share the radio removal?
I did show some of it, you will need the ford (or other tool) to remove the radio by inserting them into the opening as I showed. Then slightly pull out and towards you.
@@esqu3l3to I saw the insertion of the tools and a slight pull - there is no video of removal
All you need to do is to insert the removal keys, "click" them in, push outward and pull back. It can take a few tries as the brackets that hold the radionin can be very stiff.
What is the adapter number on the bag
For the wiring harness or the antenna?
can I put a double din stereo in my focus 2006? was really helpful thanks
If you have a factory radio the same or similar to the one in this video then yes you can install a double din. No problem, glad it helped.
Moly kit won’t kit and it’s the year I need it’s stuck on something
Sorry, I don't understand what you mean
Awesome video!
take a drink every time he says "uhhh"
How drunk did you get?
Esqu3l3to insanely
Where can I find the special tool to remove the radio ?
You can get them from amazon, ebay. You should be able to find some at a local radio shop or some automotive parts retailers as well. Here is a link from amazon Canada...
www.amazon.ca/Baosity-Blaupunkt-Pieces-Stereo-Removal/dp/B07D9L2KFD/ref=sr_1_14?crid=52JLT11HYV79&dchild=1&keywords=ford+radio+removal+tool&qid=1598411667&sprefix=ford+radio+%2Caps%2C189&sr=8-14
A little more clarity on which kit to buy would have been nice.
What else do you need to know?
@@esqu3l3to At no point in the video did you mention that the Blaupunkt stereo needed the different deck kit and wiring harness. Wish I hadn't spent the extra money on the shit that doesn't fit.
Would this work for for my 2003 ford zx3
the single din radio will work in basically any car, the dash kit and wiring harnesses are what matter and if your car can fit a new radio.
Thanks for the tutorial, i would love to have the things i would use to pull the Ford car stero and the full equipment to install the new a car stero.
+Osaigbovo Ahanon - you can get the removal tools from ebay or even a local car audio shop including places like canadian tire *in Canada* or similar places in the U.S.
I have trouble turning the radio on... it doesn't work
the radio itself or the fm modulator?
What about the steering wheel controls?
Will those still work?
hey man sorry for the late reply, if your focus has steering wheel controls then no they will no longer work if you replace your stock radio, however you can get an adapter to have them work with the new radio. you can check at axxessinterfaces.com/ to see which one you would require.
Thanks for the response man!
I'm still waiting on a crappy eBay seller for my dash trim seeing how I got sent the Ford F150 kit instead of the Focus. Got the first kit in a matter of days, been at it for about a month by now trying to get them to send the right kit... so there was no rush in your reply; sadly for me :')
Where did u get the tool to pull the factory radio out?
+hardyb311 - I got them on ebay. You can also check local stores or even car audio shops.
Kobethegoat Just use 2 bicycle spokes. Cut the 90 degree bit off and bend the spokes 180 degrees. It will look exactly like the official tool.
Where did u get the tool to remove the radio
I got these tools at a local store, you can also get them online. Just search ford radio removal tool.
Is the whole kit easy to remove again?
Yes it is, just remoce the radio with the removal keys and then pop out the dash kit as its held by tabs.
can you send me the link where do you buy these cabels to connect radio
+Rohit Singh for sure I can, I'll post it as soon as I can.
Rohit Singh , One option is here: goo.gl/kTVY91
Yes that looks the same. Should work.
Grazie❤️
Welcome
How deep is the hole on the 2 to 1 din adaptor ? Thanks
+pepithebest - I'm not sure exactly what you mean. Are you refering to the mounting depth of a double din vs single din?
Esqu3l3to I'm refering to the glove compartment. Thanks
+pepithebest - oh ok, I'm not sure. Its my nephew's car so I will check and let you know.
Esqu3l3to Ok, thank you very much !
which kenwood radio is this model?
I can't recall the exact model for this one but the newest pretty much same new model is kdc-bt375u.
You have part number
How can I order it?
you can order the radio and dash kit online. radio depends on what you want
Where do you get the clips that you insert into the sides to pull the stock radio out?
you can get them on ebay or almost any car parts store. Here is a link to a set for cheap...
www.ebay.com/itm/2x-Car-Stereo-Radio-Release-Removal-Tool-Key-For-Audi-VW-Ford-Mercury-Lincoln-/291558917955?hash=item43e2440743:g:iv8AAOSw2gxYxTNk&vxp=mtr
Where is the fuse for the radio
It is located in the main fuse panel, below the steering wheel.
Fantastical
neden orijinal teyp varken sonradan teyp takarlar anlamıyorum.
Good uhhh video uhh
5000 rds m311490
not work..
Not work? What doesnt/didnt work?
@@esqu3l3to
I bought the plugs directly from ebay. I don't think it fits the pins. I really can't get him to start ... I don't know what to do with him. I mention that I have a ford focus in 2004 and the cassette player is still kenwood. Just like in your video