Thank you for showing it up close and explaining it. I wanna build a lowrider but nobody on RUclips or on the media showing how they build theirs :( Badass build though !
Another Masterpiece Carnal, Looks Great.... Ready to take on the streets. The Lock Up Looks MEAN AF too... Damn it !! Great work, Attention to Detail.... Craftsmanship. Keep them coming and Keep the Videos rolling. Thanks for sharing the insights and tips of what to get done. 😎👍🏽
Nice work g ...I have a question di the back wheels dint hit the skirt side ? I have same car and I'm having that issue I'm from Virginia I bought the car donw on Tennessee and can't find someone here make it work just trying to fins out if you did something to the axel like make it short or some
Nothing like a fresh cut car, another great job bro! Are those uppers 1.5” or 2” extended? Also seems like the powerballs with the long C-Channel is not only good for reinforcement, but also better for distributing pressure throughout the axle oppose to welding it straight to the middle of the axle.
I'm just curious as I don't know much about hydraulics but why use one pump for the front and two for the rear of the front weighs more. Wouldn't 2 pumps be better for the front? Just curious thank you..
I am still learning but here goes - To three wheel from a static positon you raise the front, then one rear. If you only have one pump on the rear - you have to lift the front, then the rear, then dump one rear corner. Depending on weight distribution, it may not even collapse that rear corner unless you turn and drive. If you have two separate rear pumps you have more control over the sequence you can use.
Love your work bro,I'm building a civic with 1 gate n 4 batteries I have a couple questions that I like to ask you if that's OK with you? Thanks in advance...
Nice bro is that just the bmh caddy long arm kit for rear and telescopic shaft do you sell that kit if so how much once again you got down again bro love that lock up I need a set for my caddy or g body what size strokes again in rear them front arms look good too are they 1.5 or 2 thanks again big homie
Yes sir Black Magic Long Arm Kit. I personally did not want to install the kit I wanted to build my own shit. But customer wanted it so that's what that hoe got 🤣 I do not stock those kits. Comp motors Solenoids Switches Dumps Fittings Hoses Return hoses Pistons Cups Etc In stock ready to ship. PayPal for payment
I'm the Black Magic Distributor for Kern County I have the kits in stock for installation. Installation takes around 6 to 9 weeks from pickup, towing, dropped off. This project right here took me 10 weeks, in the 10 weeks I took 1 week off to be with family & get threw Christmas. Exact work time on this one was 8 weeks completed, I try to give real time frames that way people know what's up. Everything is supplied by me . Kits, Batteries, electrical, hardware, oil, metal, specialty metals, cnc, brake lines, extended brake lines, brake fluid, under coatings, paint, bushings, ball joints, uniballs, lug nuts, fuel lines, clamps, Etc Only 15 different companies I use to build a No Limit Setup 🤣 Real Talk
@No Limit Fabrication We Lowriding Est.2007 thats cool man. Would you do a car from out of town? I'm on the east coast. If you dont mind me asking, what's a rough estimate of cost for idk let's say a 3 pump setup on a 63 impala 4 door? I'm just trying to gather as my info as I can. Thanks for the response also. I really appreciate that you took the time to respond
17k to 23k and that's not profit. There is a lot of material & equipment I use to make all this happen. 80% deposit at pickup 20% at drop off Towing included for California Out of State homies we have to figure out a number for transportation
I want to see how you do the frame on how you put the logo together tell me and my brother want to start doing when we get our cars can you videos like that how you cut the fray how you do that the hydraulics and everything I want to learn how to do that, bro my brother wants to know how to do that I’d rather the weather weather head up ahead Rosen car he show video how to do it. Your videos off the hook bro you’re being a video
🤣🤣🤣 So let me understand you rookie. Drive line at pancake is in line. Drive line mid way is in line Drive line maxed out before hitting transmission crossmember is in line. Drive line at 3 wheel is in line. Only been doing this 17 years 🤣🤣 guess I don't know what I'm doing hahahahha Rookie Ass Hoe Take Your Bullshit Else Where 🤣 You Ain't Building Shit Lol Hey rookie
Another Masterpiece ! No Limit is Master of the Pop Lock Warriors 💯 Come on !
Thank You 💪💪💪
This business is a word of mouth ! You do quality work your job will speak volumes for recommendations your way. Good job homie !
Loving that 3 pump 10 battery set up, great content
Beautiful!!..and the walk around is the cherry on top bro👏👏
Thank you for showing it up close and explaining it. I wanna build a lowrider but nobody on RUclips or on the media showing how they build theirs :( Badass build though !
Attention to detail is awesome 👍
Beautiful work.....
Dope ride, great job guys.
Finally someone sprung for a Square. Looking like it's ready to take flight.
Yes sir. This one definitely didn't come from the 99 cent store 🤣hahahah
3:59...welcome to "Ground Central Station"
Clean as always homie
Mahalo🤙🏽
Bad ass work bro nice n clean
Another Masterpiece Carnal, Looks Great.... Ready to take on the streets. The Lock Up Looks MEAN AF too... Damn it !! Great work, Attention to Detail.... Craftsmanship. Keep them coming and Keep the Videos rolling. Thanks for sharing the insights and tips of what to get done. 😎👍🏽
Thank You Much Appreciated. Until the Wheels Fall Off 💪💯
You a bad boy I love your work " Let's do it"
Clean homie !! Good demo 👊🏾💯
Mad skills bro
Badass work big dog ....no limit c'mon!!!!
clean setup
💯
This is dedication frl💯💯🎓🎓
Get well bro
Shit I'm trying. It's been a crazy year. Gots to keep pushing forward my family relies on me. 💪💪💪💪👌
Nice work my bro! Very nice work!
Dam comin out with that straight fire 🔥🔥🔥✌
Thank You Highly appreciated 👍👍👍
Well done….💯
Clean homie
Awsum job...
" Outstanding "Yep-Yep.
Damn nice bro!!
Thank You. 20 mock ups later but she coochie 🤣🤣🤣
Great vid
Love when people cut their cars and take the time to do it right
Oh rale chingo ese el. Mr. Olguin 🇲🇽👍👍😎
Not a Cadillac fan but this one and everything done to it does go hard respetos.
So much heat! 🤟
I like this 🎉props homeboy!❤
Dang.homie.u the best who eva did it.and got away wit it
Aw man clean ass caddy
GD!!! Lowrider for vida
On my 81 Fleetwood I had 4 pumps 2 piston to the nose and 16 batteries
I had 4 pumps 2 pistons & 12 batteries in my 66. I'm in Vegas too bro
@1:07
😂😂😂😂😂😂
Yup , that guys .......
🤣🤣🤣🤣🤣😂😂😂😂😂😂
Bro you always rip it up brotha💪🏽 hope you get better brotha sucks to be sick ese
Thank You much respect 💯
You feeling better brotha?
You all be proud, much love here.!
Luxor makes a lock for a hub ?? Please tell me more! My caddy always losing the right side wheels on China's
He said don’t do it. 👊🏼🤙🏼
“That Cadillac, don’t do it”!!!
" The Repeat Offender" 🤣 This homie right here has had multiple rides done by me. He be on that Juicy Juice hahahahah
@@nolimitfabricationwelowrid159 You did a great job on that Cadillac. I wish you continued success.
Be proud homies
I don’t know shit about hydraulics but I can tell this is some well done shit now I want to get into the hobby 😬 DONT DO IT 🤣
That shit is on 🔥🔥🔥🔥🔥
Thank You. Until the wheels fall off lol 💪
I like the 1993 fleetwood model better but the older Deville is clean also
Nice work g ...I have a question di the back wheels dint hit the skirt side ? I have same car and I'm having that issue I'm from Virginia I bought the car donw on Tennessee and can't find someone here make it work just trying to fins out if you did something to the axel like make it short or some
I don't like it I love it!!!!!
👌👍✌️👊💯
Thank You. Badass comment 💯 💪
Súper clean !!!!!
What’s a part number for a Gbody break line
Longer …for telescopic?
Thanks for info
Looking Clean how much this run
How much does a set up like that cost with parts and labor and reinforcements on same kinda car? Just a estate would be fin?
Dope as f$$ck
Nothing like a fresh cut car, another great job bro! Are those uppers 1.5” or 2” extended? Also seems like the powerballs with the long C-Channel is not only good for reinforcement, but also better for distributing pressure throughout the axle oppose to welding it straight to the middle of the axle.
Thank You. They are 2" tuck on the big dog uniballs so it will look more like a 1.5" tuck because there is more degree you get from the uniball
Mane damn
Pimpin Ain't Eazy 🤣🤣🤣🤣🤣 Thank You for comment
17:43 I died laughing the sound he made 😭
Very nice
❄️❄️❄️❄️❄️❄️❄️❄️
My dude be killing me😂😂😂 don’t do it😂😂😂
🤩🔥🔥🔥🔥🔥🔥🔥🔥🔥🤩
I got a93 fleetwood just got the long arm kit how do you find the point to weld in the lower brackets
How much torque could the driveline handle?
“Got my neighbors drivin by like a hoe”😂😂😂
How many coils are on the front thanks
How many inches could this setup do?
😮
Sick or not, still grinding!
Thank You. I got mouths to feed and mortgages to pay 💯. 👍
I'm just curious as I don't know much about hydraulics but why use one pump for the front and two for the rear of the front weighs more. Wouldn't 2 pumps be better for the front? Just curious thank you..
I am still learning but here goes - To three wheel from a static positon you raise the front, then one rear. If you only have one pump on the rear - you have to lift the front, then the rear, then dump one rear corner. Depending on weight distribution, it may not even collapse that rear corner unless you turn and drive. If you have two separate rear pumps you have more control over the sequence you can use.
Where are you located at?
Real good work bro,what city are you located in?
I'm out of Bakersfield Ca
Come on!!!
what does something like that cost>>??
How much for a setup like this bro ??? If my Caddy is cut already 2 pumps ,8 batteries I just wanna upgrade
If I wanna high lock up with 14s in the back ..will drop mounts be enough and adjustable uppers? I have a G-Body
High lockup is with telescopics. 14" cylinders is street - factory location
@@nolimitfabricationwelowrid159 gracias
Do you sale the reinforced kit for this car Im in Vegas
Love your work bro,I'm building a civic with 1 gate n 4 batteries I have a couple questions that I like to ask you if that's OK with you? Thanks in advance...
Reverse cylinders are king. Don't go any bigger then a 10" cylinder
@@nolimitfabricationwelowrid159 I'm running 10s in rear n 8s in front how you think that will be. I have accumulators instead of springs also?
Nice bro is that just the bmh caddy long arm kit for rear and telescopic shaft do you sell that kit if so how much once again you got down again bro love that lock up I need a set for my caddy or g body what size strokes again in rear them front arms look good too are they 1.5 or 2 thanks again big homie
Yes sir Black Magic Long Arm Kit. I personally did not want to install the kit I wanted to build my own shit. But customer wanted it so that's what that hoe got 🤣 I do not stock those kits.
Comp motors
Solenoids
Switches
Dumps
Fittings
Hoses
Return hoses
Pistons
Cups
Etc
In stock ready to ship. PayPal for payment
1.5" tuck
how much does this cost?
Hey I have a question, so you said it takes 10 weeks, so do you order all of the parts or do the customer?
I'm the Black Magic Distributor for Kern County I have the kits in stock for installation. Installation takes around 6 to 9 weeks from pickup, towing, dropped off. This project right here took me 10 weeks, in the 10 weeks I took 1 week off to be with family & get threw Christmas. Exact work time on this one was 8 weeks completed, I try to give real time frames that way people know what's up. Everything is supplied by me .
Kits, Batteries, electrical, hardware, oil, metal, specialty metals, cnc, brake lines, extended brake lines, brake fluid, under coatings, paint, bushings, ball joints, uniballs, lug nuts, fuel lines, clamps, Etc
Only 15 different companies I use to build a No Limit Setup 🤣 Real Talk
@No Limit Fabrication We Lowriding Est.2007 thats cool man. Would you do a car from out of town? I'm on the east coast. If you dont mind me asking, what's a rough estimate of cost for idk let's say a 3 pump setup on a 63 impala 4 door? I'm just trying to gather as my info as I can. Thanks for the response also. I really appreciate that you took the time to respond
How much would a setup like this go for anyone know ?
Great work. Like good ish. But between the come ons and don’t do it’s and ohh La La have to mute ya.
Where are you located
You near Pismo Beach California?
Bakersfield CA
Rear telescopic cylinders 12" - 24" or 14" - 26"?
16" to 30" big dog shit 🤣🤣🤣
Ooohhhh sh***t. Dope. I have 14"-26".
How much would you charge for something like that on a exatly same car?
$21,750
80% at pickup
20% at drop off
California towing included
how come u don’t got chains bro
How much for that dump adex
How much $$$
How much you charge for this? How long it take?
This is probably $5-6k
How much for a set up like that
Close to 2 yellow bands 💵💵💵💵💵
@@nolimitfabricationwelowrid159 so what $20,000
Is that 20k
CustomGrow420 into lowriders now? 😂😂😂
How much do you charge to build a car like this
17k to 23k and that's not profit. There is a lot of material & equipment I use to make all this happen.
80% deposit at pickup
20% at drop off
Towing included for California
Out of State homies we have to figure out a number for transportation
As soon as I saw the drive shaft.😮😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅 no good its pointing down
10 weeks... what's the price$$?
45k full built
we know what you mean
Got a number i can call i have a 93 Lincoln tc trying to see prices
I want to see how you do the frame on how you put the logo together tell me and my brother want to start doing when we get our cars can you videos like that how you cut the fray how you do that the hydraulics and everything I want to learn how to do that, bro my brother wants to know how to do that I’d rather the weather weather head up ahead Rosen car he show video how to do it. Your videos off the hook bro you’re being a video
Pinion angle is all messed up go to learn your geometry!
🤣🤣🤣
So let me understand you rookie.
Drive line at pancake is in line.
Drive line mid way is in line
Drive line maxed out before hitting transmission crossmember is in line.
Drive line at 3 wheel is in line.
Only been doing this 17 years 🤣🤣 guess I don't know what I'm doing hahahahha
Rookie Ass Hoe Take Your Bullshit Else Where 🤣
You Ain't Building Shit Lol
Hey rookie
@@nolimitfabricationwelowrid159 ai chatGPT bots 😎
LoL 😂
That is NASTY
don't do it
I got a 61 SS rag... and I want a setup just like this. You think I could to 12 batteries and 3 pumps?