Now i won't be hard on myself for shipping my ride outta town 😅 glad you did your customer right with communication in what they wanted and not swap their parts with old used parts without their permission... keep up the Amazing work!
He’s gonna wish he did that bridge. I know I was contemplating on not doing a bridge and then thought it would be a bad idea not to so I’m adding one. Super Dope Ass Fire Work though.
The 6 batteries tucked away are arranged for the number 1 battery and number 6 battery are poisoned on the left bottom corner of the rack near the pump. The 6 pack multi charger gets clamped on with easy access. Everything in the trunks is detailed drawled on paper before fabrication & electrical work. My primary focus is to give everyone beefy shit and one off trunks. No look alike trunks around here 🤣
Man that's so bad ass that you just build your own uppers. I wanna try that. One thing I was wondering, are you gonna drop the upper trailing arm mounts? It would help with the pinion angle... Otherwise how will those telescopics fully extend?
Not bad bro!!! 6 batts single pump u say whaaat pretty hot lil setup how much ballpark total parts and labor so I can start dreaming of my next G body summer swinger
@@nolimitfabricationwelowrid159 how much for them with the uniballs??.. super nice work homie! Thanks for sharing your work with the world, always look forward to watching your videos.
I'm out of Bakersfield CA. Everything is by appointment. I do one ride at time, I don't stack rides. This ride got transported back out to Santa Maria CA.
I'm currently booked out for over 6 months. I'm not currently excepting anymore appointments until I knock the appointment list down. If you need it done in 5 seconds you can try contacting these other shops. Pelayo Hydraulics 661-859-6258 Lowrider Rudy's 661-401-0913 Jose Certified Customs 661-668-8352 Gary Fatboy's Restoration 661-213-6702 El Diablo Hydraulics 661-865-6114
Total 9750 80% deposit at pickup 7800 20% at drop off 1950 8 to 12 weeks to complete Towing included for California out of state customers extra fees apply
You do need a pump, it does not need to be installed on the car but it needs to be grounded to the car, attach one foot hose to hydraulic cylinder with a slowdown valve or a dump, then you have to close the slow down valve to hold pressure and then remove pump, it would probably be better to put a spring in there instead of hydraulic cylinder.
Lil metro phone huh?!😂😂 Metro keep us in communication i phones super overated and oversaturated! I don't ever want anything that half the world has to have.
Now i won't be hard on myself for shipping my ride outta town 😅 glad you did your customer right with communication in what they wanted and not swap their parts with old used parts without their permission... keep up the Amazing work!
Dependability and reliability No Limit putting out good quality work. See you next year big dog!!!!🔥🔥🔥🔥
Thank You. Until the wheels Fall off 💪
Man your setups always look 💣 !!!! 🔥🔥🔥🔥
Thank You Highly appreciated 👍👍
This guy is unbelievable he knows his stuff
Damn Thug Life 🤣🤣🤣🤣
You do some real good work bro. Im a welder and have to say ur welds are good.
Thank You 💪
What is the diff between a good and bad weld
Great install great work keep it up. Showing love from Houston tx
None of anything you do is overkill, it's all proper! Impeccable.
Thats one hellofa Cut Job Homie! Expert Work. 💯
Your definitely going places G! Always clean, always quality work! Wish I was in Cali!
🤜🏾💯🤛🏾
You really do some super fire work 💯
Setup is clean , frame is done right, no what I mean!
Thank you lol 👍
A few steps ahead! Sturdy work!!!!!!
Beefy hahahah Lol
❤❤
He’s gonna wish he did that bridge. I know I was contemplating on not doing a bridge and then thought it would be a bad idea not to so I’m adding one. Super Dope Ass Fire Work though.
Thank You 💪💪💪 Bridge is king
everythings put together really good!!
Good energy in your cars that's awesome 😎
Nice work as usual! Wish I was closer to you!
Clean Homeboy!!! I like it!!! Firme Cutlass!!
Clean ass work. I feel sorry for the owner when it's time to charge tho 😂
The 6 batteries tucked away are arranged for the number 1 battery and number 6 battery are poisoned on the left bottom corner of the rack near the pump.
The 6 pack multi charger gets clamped on with easy access.
Everything in the trunks is detailed drawled on paper before fabrication & electrical work.
My primary focus is to give everyone beefy shit and one off trunks. No look alike trunks around here 🤣
Super sick set up! I’d honestly do those lower control arms before anything tho!
Thank You. I agree tell the customers more blue Hundreds 🤣🤣🤣🤣
Yo wtf this setup is clean AF G good job
Damm gee love your work just came across this video ! 🔥
Man U got a beauty thank for showing us ur car
YOU KILL IT EVERY SINGLE TIME BRO !!!
Nice .like the arms custom built
wow ...........very nice work!
Thank You 💪
CUTLAS on fluid know I meen?! Uhnn huhh!! Ooh la la!
Nice work , no limit ❤ one day I would like for you to work on my 1984 delta 88. ??
LoL “ LiL mini pop locker”
I love it !!
Ooo la la….com on😂💪🏼nice job
Thank You 👍
Do you have a video on how you reinforce the inside of the front spring pockets. And also installing that tube
Man that's so bad ass that you just build your own uppers. I wanna try that.
One thing I was wondering, are you gonna drop the upper trailing arm mounts? It would help with the pinion angle... Otherwise how will those telescopics fully extend?
Clean.....How can i get ahold of that ball joint set up
Not bad bro!!! 6 batts single pump u say whaaat pretty hot lil setup how much ballpark total parts and labor so I can start dreaming of my next G body summer swinger
No Limit Locking up more shytt than the prison system!
Bro keep up the good work.
Sheesh the way that cutty locks up is super nice ,are the A arms extended ?
Man dog i want that No Limit HookUp on my Cutty
damn nice homie👍
Thank You 💪
Nice set up sir
It's that a simple set up? like how much does it cost
Ooooooo damn brotha fire 🔥🔥🔥
Thank You 💯 👍
Beautiful install ❤❤clean as fucc
Nice work
Nice work, 👍🏼 🍻
Ooo la la how can I get those front arms
PayPal or Zelle 🤣 world wide shipping Available
@@nolimitfabricationwelowrid159 how much for them with the uniballs??.. super nice work homie! Thanks for sharing your work with the world, always look forward to watching your videos.
Luv ur work homie
How much for some uppers and lowers for g body
What cylinders are in the rear? Clean work 🔥
I’m from Sikeston Missouri! How much would I need to get it sent to you for this? it’s a virgin never cut. my project!
That's what i need is my slip yoke
Where’s your shop? Location??
Lets see a video of what it does 5 or 6 liks ma boi! 👌🏻💪🔥
I'm out of Bakersfield CA. Everything is by appointment. I do one ride at time, I don't stack rides. This ride got transported back out to Santa Maria CA.
Clean work doggy
Clean ass cutty g💯💪
Where you located at want to get my 86 regal done.. ?
i need some 1995 lincoln town car arms how much you charge
where can I get those swivel ball joint in the front ? with the spacer, can I use It for hopping ?
can I put hydraulics on a fox body mustang
How long is the line I got an 86 cutty need the same set up with a bridge
🔥🔥🔥🔥🔥🔥
How much does all that work run
❤❤
How do I get in contact with you need some reinforcement asap
I'm currently booked out for over 6 months. I'm not currently excepting anymore appointments until I knock the appointment list down.
If you need it done in 5 seconds you can try contacting these other shops.
Pelayo Hydraulics
661-859-6258
Lowrider Rudy's
661-401-0913
Jose Certified Customs
661-668-8352
Gary Fatboy's Restoration
661-213-6702
El Diablo Hydraulics
661-865-6114
How can I get in touch with you about doing some A-arms?
What size is the C channel on the top of the rear?
How much was this set up
Total 9750
80% deposit at pickup
7800
20% at drop off
1950
8 to 12 weeks to complete
Towing included for California out of state customers extra fees apply
that's nice
🔥🔥🔥
Nice
You not going to put a bridge with the chain on the rear
Customer did not want a bridge. Chains have nothing to do with 3 wheeling. Chains are for tightening the axle when u about to hop
How much to make me.front arms for 98 Lincoln TC 2 inch???
805-268-6780 text me for Burger King Menu 🤣🤣🤣
What kind ball joint
No Limit Uniballs
That's Dope nice cut dogg
Thank You 👌
What that job run ? $$$
One yellow band & a Half
💵💵
are you in Bako ?
Yes sir
Man do you know anybody here in Cleveland Is Ohio area That does hydraulics
Can someone let me know if I can raise the front up with out pump in the car
You do need a pump, it does not need to be installed on the car but it needs to be grounded to the car, attach one foot hose to hydraulic cylinder with a slowdown valve or a dump, then you have to close the slow down valve to hold pressure and then remove pump, it would probably be better to put a spring in there instead of hydraulic cylinder.
Firme asf
Yes I know what you mean -
If I send you my 64 arms will you make me some like that $$$$$$
You know what I mean😂😂😂😂😂😂😂 how to get off couldn’t take it anymore
Cummmoonnn!😂🏁🏁😎
Lil metro phone huh?!😂😂 Metro keep us in communication i phones super overated and oversaturated! I don't ever want anything that half the world has to have.
Bakers
Firme🖤🔥
Dope carnal dope
setup like this already God for me...just the cars,.cars is ugly...but 1970 model cars is lowrider bios their pioneer
❤❤❤