Thanks so much. This helped me tremendously!!! I learn by seeing how things are done rather than reading the instructions. Plus, you gave more information than the manual.
Thanks, Brad. I've got an HQ Sweet 16 and didn't know how to attach the True Stitch regulator. You told me exactly what I needed to know. Phew! So appreciative! ...darlene in san diego
Sure there are a lot of wires, but when you look at them, each one only fits into one place so set up is pretty obvious. It's the same with desktop computers. I've set up tons of those through the years, since in our house I'm the designated "techie." So it must be easy if I can do it. Great video, as always.
Thanks so much. I just purchased Babylock Tiera ll with stitch regulator. Will have to try it today. Wish I had you here to help with tension on my machine. Can get it set and stitching nice, turn off but when I come back and turn on tension has gone crazy, bird nest, loose stitches just a real mess. Might work out in 5 or 6 inches but not usually. Any suggestions??? Thanks again, Really liked this video
wow thanks so much now I can try it I was lost love your videos now if you could just help me with the new upgrade 4 to the ellisimo gold , dealer put the soft ware in it but now i don't know anything else very new to it just got it a short time ago. I did put the beam in but that's all when I try to use my machine it says to do something with the needle position have no ideal so now I cannt even embroidery on it so any help would be great you speak so clear and slow enough I can understand you love your videos thanks again
Very informative..thank you.i noticed once you turned machine off and when attaching the trustitch it came back on to the regular presses foot....not the free motion, do you not have to put the machine back to free motion?
Does the V foot controller work with the stitch regulator? The Reference Manual says that foot controller works on the Ellisimo Gold2. If so, where can I buy one?
Thank you, Brad! I want to ask a question, please. I am going to put my midarm, Tiara, on a Grace Frame Cutie. If my husband makes me a custom ruler table, that sticks out a bit on each side of the needle, underneath the quilt, would I be able to use the "hockey puck" to slide around on that wide, slick, ruler table, and still use my stich regulator? I cannot get a ruler table made for the Tiara, because Sew Steady said they only make them for domestic machines. I hope you can advise me a bit. I think if we make the table wide enough, it will ride under the quilt, and give me a surface to put the hockey puck on. We will have to make sure the table is stable, and won't tip. Thanks.
@@petmomful2260 I'm investigating using the regulator with a cutie frame as well and wasn't sure if it was possible. Did you end up getting in to work with your frame?
Now I need to sell my Tiara and table, and the carriage and special handles they sent me to use that machine on the frame. I don't need them with the Brother machine. It has wheels for feet, and drops right down into the tracks. I hope that all makes sense.
i just purchased the trustitch regulator for my ellisimo gold 2. my foot pedal has two plugs and it wont operate without both plugged in. but the regular only has one, everything is charged, and in the proper plugs, but i cant get mine to work,,,am i doing something wrong? guess i am missing something. as all the demos only show a foot with one plug on it not two. what am i doing wrong?
thank u,thank u I just bought the Ellisimo used with all three updates from the dealer October 8, 2016, and the person trade it in for another machine, in Feburary 2015 when she bought the Ellisimo with stitch count SCS-001368026, No.1634401264, I don't understand the numbers if u do can u explain it to me, I looked through the book but cant find any informations, I also got the stitch regulator with the machine and sew, so, soo happy I found u I got a lot to learn and I will be playing with it, also can u do a demo on the continuous hoop, no one gives classes on the hoop, i can really use your help, thank u, peace, love and happiness to u and your staff.
Thanks so much. This helped me tremendously!!! I learn by seeing how things are done rather than reading the instructions. Plus, you gave more information than the manual.
You do such a great job of teaching! Thank you for helping me understand my machine! I watch all your videos.
Thank you! I just got me a Babylock stitch regulator, your very was very helpful, appreciate the demo.
You are the BEST!!!!!! nobody else has done this type of instruction as well as you! THANK YOU!!!!!
Thanks, Brad. I've got an HQ Sweet 16 and didn't know how to attach the True Stitch regulator. You told me exactly what I needed to know. Phew! So appreciative! ...darlene in san diego
Thank you, I had no instructions, and this made so much sense.
You are a very good instructor.
Sure there are a lot of wires, but when you look at them, each one only fits into one place so set up is pretty obvious. It's the same with desktop computers. I've set up tons of those through the years, since in our house I'm the designated "techie." So it must be easy if I can do it. Great video, as always.
Thanks, Brad, I needed a refresher.
Thank you for this explanation. Really appreciate the information.
I need to understand the value, in terms of usage,
$$$ for a non quilter. Great video, very clear steps.
Thanks so much. I just purchased Babylock Tiera ll with stitch regulator. Will have to try it today. Wish I had you here to help with tension on my machine. Can get it set and stitching nice, turn off but when I come back and turn on tension has gone crazy, bird nest, loose stitches just a real mess. Might work out in 5 or 6 inches but not usually. Any suggestions??? Thanks again, Really liked this video
before you start, pull the thread tight into the upper tension. it might have slipped out.
wow thanks so much now I can try it I was lost love your videos now if you could just help me with the new upgrade 4 to the ellisimo gold , dealer put the soft ware in it but now i don't know anything else very new to it just got it a short time ago. I did put the beam in but that's all when I try to use my machine it says to do something with the needle position have no ideal so now I cannt even embroidery on it so any help would be great you speak so clear and slow enough I can understand you love your videos thanks again
very informative video, thanks for the help
Does the foot pedal need to be pressed down all the way while running the stitch regulator?
Very informative..thank you.i noticed once you turned machine off and when attaching the trustitch it came back on to the regular presses foot....not the free motion, do you not have to put the machine back to free motion?
it does have to be put back in free motion, i think you just don't see me do it in the video
thanks another great tutorial.
Do you have your foot controller pushed all the way down?
Does the V foot controller work with the stitch regulator? The Reference Manual says that foot controller works on the Ellisimo Gold2. If so, where can I buy one?
Thank you! So helpful
super videos! thank you
Hiya, do you know if the Tru st will fit a brother innovis 955 in the UK.. Thank you
Thank you, Brad! I want to ask a question, please. I am going to put my midarm, Tiara, on a Grace Frame Cutie. If my husband makes me a custom ruler table, that sticks out a bit on each side of the needle, underneath the quilt, would I be able to use the "hockey puck" to slide around on that wide, slick, ruler table, and still use my stich regulator? I cannot get a ruler table made for the Tiara, because Sew Steady said they only make them for domestic machines. I hope you can advise me a bit. I think if we make the table wide enough, it will ride under the quilt, and give me a surface to put the hockey puck on. We will have to make sure the table is stable, and won't tip. Thanks.
sure I dont see why it wouldn't work
@@EllicottCitySewVac Okay, thank you. I am glad to get a second opinion. Appreciate it! Stay well.
@@petmomful2260 I'm investigating using the regulator with a cutie frame as well and wasn't sure if it was possible. Did you end up getting in to work with your frame?
Now I need to sell my Tiara and table, and the carriage and special handles they sent me to use that machine on the frame. I don't need them with the Brother machine. It has wheels for feet, and drops right down into the tracks. I hope that all makes sense.
I can not get my bottom tension tight enough. How do I adjust it?
How long does it take for the controller to charge up?
Where can I purchase just the overly ?
Can this be used on the chorus machine? Thank you.
sure if you can find one
@@EllicottCitySewVac thank you! I have seen them on Etsy and eBay.
i just purchased the trustitch regulator for my ellisimo gold 2. my foot pedal has two plugs and it wont operate without both plugged in. but the regular only has one, everything is charged, and in the proper plugs, but i cant get mine to work,,,am i doing something wrong? guess i am missing something. as all the demos only show a foot with one plug on it not two. what am i doing wrong?
its not you! your dealer should have known that you need a different foot control if you have an ellisimo gold ii.
thank u,thank u I just bought the Ellisimo used with all three updates from the dealer October 8, 2016, and the person trade it in for another machine, in Feburary 2015 when she bought the Ellisimo with stitch count SCS-001368026, No.1634401264, I don't understand the numbers if u do can u explain it to me, I looked through the book but cant find any informations, I also got the stitch regulator with the machine and sew, so, soo happy I found u I got a lot to learn and I will be playing with it, also can u do a demo on the continuous hoop, no one gives classes on the hoop, i can really use your help, thank u, peace, love and happiness to u and your staff.
Does this work with the Luminaire??
yeah if you can find one, been discontinued for years
Will this work with a Destiny?
yes
Brad Martin do you have to buy one specifically for the destiny if you already have one for the Ellisimo
What about the Altair?
altair didn't exist when I made this video, it is compatible
i want to get that destiny...
Will it work with the Destiny?