called whiskers, painted mine black too. nice lip might get the same one for mine. getting the m sport bumper is what everyone does i kept mine as is. dope car bro
@@SimpleSickBuilds also. If you wanna do something cool and colorful I suggest taking off the wind guard that pops up when you open your sun roof. It comes off with 2 screws. Super easy. I have a 328i 2015 (mineral grey) and painted mine golden yellow. Looks really cool imo.
Quick question, I'm in the process of installing it, installed the 2 side screws, but middle is hanging right now, tried screwing in the middle screws with just a screwdriver, and is nearly impossible, as there's no premade holes
@@shawndegamer5366 you are meant to drill 3 there screws in the middle where indicated in the splitter, there is no hole in the middle of the car, only the 2 on the sides. The kit should included a double sided tape, use it to keep the splitter in place while you drill the screws in. You can do it by hand but that what would require patience and muscle, I'd recommend borrowing a power drill from a friend and use it to drill the screws in.
I know this was 2 years ago, but the fun thing is im in the same situation like you at 3:15 , I started lookinf for a front lip for my f30 and my mirror caps and rear spoiler are carbon fiber ones, but I think I will also go with a simple gloss back front lip because the carbon one wouldn’t hold up well on eastern european roads
I'm getting one of these lips for my car too. You should just vinyl wrap those plastic inserts - wont show the chips as bad because vinyl has some healing properties. Either that or use a proper clear coat.
I got it off ebay .. unfortunately the seller no longer sells it😒 ... im on the hunt for a new one right now if I find one I'll tag you or shoot you the link
Nice vid👍🏻The front silver bits are called either 'Fog light trim' or 'canards' at least here in UK hope that helps. Been looking for some too as the silver looks awful on these cars😂😭😂😭 But defo need a front spilter/skirt too as car looks awesome😍
@@schris_f30 if you go to a wrapping place they'll take em off for you and should only take like 10min at most for wrapping. Using a card could help to take them off :) I took one of mines off but took time since didn't wanna snap it...I'd say same difficulty as taking mirror caps off honestly.
lip looks great, I actually like the look of the non M bumper as well
called whiskers, painted mine black too. nice lip might get the same one for mine. getting the m sport bumper is what everyone does i kept mine as is. dope car bro
Thanks. Finally know what they are called 🙃
@@SimpleSickBuilds also. If you wanna do something cool and colorful I suggest taking off the wind guard that pops up when you open your sun roof. It comes off with 2 screws. Super easy. I have a 328i 2015 (mineral grey) and painted mine golden yellow. Looks really cool imo.
It changes the look to a more aggressive and complete look. Its a cheap but excellent mod. Am doing on mine now.
Just made the same install on my F31, looks MUCH better! video was helpful too :)
Glad it helped!
Quick question, I'm in the process of installing it, installed the 2 side screws, but middle is hanging right now, tried screwing in the middle screws with just a screwdriver, and is nearly impossible, as there's no premade holes
O how exactly did you screw the rest of the screws in with no holes, or did you just use 3m tape?
@@shawndegamer5366 you are meant to drill 3 there screws in the middle where indicated in the splitter, there is no hole in the middle of the car, only the 2 on the sides. The kit should included a double sided tape, use it to keep the splitter in place while you drill the screws in. You can do it by hand but that what would require patience and muscle, I'd recommend borrowing a power drill from a friend and use it to drill the screws in.
I know this was 2 years ago, but the fun thing is im in the same situation like you at 3:15 , I started lookinf for a front lip for my f30 and my mirror caps and rear spoiler are carbon fiber ones, but I think I will also go with a simple gloss back front lip because the carbon one wouldn’t hold up well on eastern european roads
Thanks for the vid very helpful! I also went with the full blackout and M style mirrors. Black on black on black on black on black…..
You went black on black on black on black nice 👌
Looks GREAT 👍🏻💯
I Really hate how non sport lips on f30’s look like this. Like wyy does the side stick out like that?
i feel like u sort of need a lip on the non m sport bumpers as they angle up quite high without one
Were did you get the splitter ?
Use black 3m vinyl electric tape on the bumper trim.
Nice video bro, car looks sweet 😎
I'm getting one of these lips for my car too. You should just vinyl wrap those plastic inserts - wont show the chips as bad because vinyl has some healing properties. Either that or use a proper clear coat.
Your right i should wrap them thanks for your feed back much appreciated🤙
Thank you, good vidéo and informations.
Thanks 🤙
all these listing i find say it’ll fit 2016-19 but i have a 14 and i can’t find any listings that fit a 14
🔥🔥🔥🔥
Where did you get your lip from ?
At the end of the vids going forward, give us a chance to stare it lol.
You right cuddy lol I was quick on it 🤣
I did but both side first then middle one last
I like that new lip bro
Thanks bro really want to keep the front bumper as is for now ...
Where did u get that front lip, can i get the link
Unfortunately the seller no longer sells the lip sorry bro.. I found it on ebay
Where did u get the front lip
I got it off ebay .. unfortunately the seller no longer sells it😒 ... im on the hunt for a new one right now if I find one I'll tag you or shoot you the link
Nice vid👍🏻The front silver bits are called either 'Fog light trim' or 'canards' at least here in UK hope that helps.
Been looking for some too as the silver looks awful on these cars😂😭😂😭
But defo need a front spilter/skirt too as car looks awesome😍
Thanks for the information 🤙
How do you take them off the fog lamp trim because there is no video of the lci thank you
@@davebrabans3532 try using a trim remover. I took mine to a wrapping garage and they did it all there. It only cost me £15 for the two in black
Do trim pieces come off easy as I really need mine wrapped as they look awful silver.
@@schris_f30 if you go to a wrapping place they'll take em off for you and should only take like 10min at most for wrapping.
Using a card could help to take them off :) I took one of mines off but took time since didn't wanna snap it...I'd say same difficulty as taking mirror caps off honestly.
🔥 link to purchase?
Link is no longer available bro sorry seller is not selling it anymore,. Also get alot of comments man sorry for the late reply.
@@SimpleSickBuilds can you do a quick google search to find the exact same one and post it here? I really want it!
how big were the screws you used to secure it?
Less then inch in a half.
Looks clean. Could you provide a link to where you got the lip/splitter? Thanks.
The seller I bought it from no longer sells it sorry bro
Akamotorsports
Ninte shop
How did the lip hold up?
Still good highly recommend it, still glossy black
Would this fit ? A ( 4series - 428i ) ?
I dont think so.
Do you have a link for this lip?
where did u get lip
Would it fit on a 2015 528i?
Not sure🤔
can you please post lisk for the lip? I dont want to buy a lip and it wont fit
edited: I found it
Where did u find it
can u link it ?
drop the linkkk
where??????
Where do you by?
The front lip is now discontinued from the buyer I got it from.. it was a ebay search
Drop the link bro ?
The seller is no longer selling it bro so u got to check out ebay bro sorry
Link pls?
Unfortunately the seller no longer sells this lip😔
You got a link?
Unfortunately I don't seller on eBay is no longer selling it ...