I have the Fisher F75 LTD with The NEL Tornado coil on it and when changing coils Fisher recommends resetting the detector. Do this by holding in the menu button and push forward on the pinpoint trigger and turn the detector on. Repeat if you change coils. They machine will react tons better. I run my LTD and the Tornado in parks in Jewelry mode. You may Have to run moderate sensitivity as Jewelry mode is more sensitive. Ground balance +2 and this machine is a beast.
Hello! My Fisher F75 Ltd with the CORS Fortune 9.5" x 5.5" and the CORS Scout 12.5x8.5", cleans up missed targets behind anyone using a CTX 3030. Fact!
The CTX will out detect most any machine for coins in parks , and the Fisher is probably the better choice for relics , and gold . That being sid . When you detect in a park with the CTX , make Sure before you dig , that the FE number is below 14 ....More than 95% of the time you can find an old silver coin at depth , or silver/gold ring , if you only dig those targets that read 1-13 FE , 14-18 FE can be a relic but likely has a rusty halo of some kind . You can find coppers , Large cents , wheat cents , and memorials as well as old nickels that will sometimes give a repeatable but high 14-20 FE number ...But you have to know your detector well , or you will consistantly come home with a dig pouch full of rusty bent nails and can tops . I still dig a few nails almost every hunt , but not many . I don't waste my time digging pull tab /possible gold signals in a park . Because you will dig 5,000 pulltabs before you're likely to find small gold ...(That was my count 20 years back ... 5,395 tabs and pull rings in 7 months before I dug my first gold ring , and it was under 4 grams if I recall ..So I stopped digging those signals ) . Having a crop circle coil like that is not going to help you unless you go slow (With headphones) and listen for those little repeatable high toned peeps that register 2/3 on more the way down on your depth meter . Having to lug around all that extra weight is tireing & would not waste my time digging unless the target registered at least 6 inches deep . I am an old guy that is not likely to waste my little bit of energy . Unless there is likely to be a reward . JMO
I have the Fisher F75 LTD with The NEL Tornado coil on it and when changing coils Fisher recommends resetting the detector. Do this by holding in the menu button and push forward on the pinpoint trigger and turn the detector on. Repeat if you change coils. They machine will react tons better. I run my LTD and the Tornado in parks in Jewelry mode. You may Have to run moderate sensitivity as Jewelry mode is more sensitive. Ground balance +2 and this machine is a beast.
Hello! My Fisher F75 Ltd with the CORS Fortune 9.5" x 5.5" and the CORS Scout 12.5x8.5", cleans up missed targets behind anyone using a CTX 3030. Fact!
What Dave said below. Lol. CTX is a beast and the best machine on the market for silvers. Just a little out of my price range.
Love my Fisher Gold Bug, would they work with that?
The CTX will out detect most any machine for coins in parks , and the Fisher is probably the better choice for relics , and gold . That being sid . When you detect in a park with the CTX , make Sure before you dig , that the FE number is below 14 ....More than 95% of the time you can find an old silver coin at depth , or silver/gold ring , if you only dig those targets that read 1-13 FE , 14-18 FE can be a relic but likely has a rusty halo of some kind . You can find coppers , Large cents , wheat cents , and memorials as well as old nickels that will sometimes give a repeatable but high 14-20 FE number ...But you have to know your detector well , or you will consistantly come home with a dig pouch full of rusty bent nails and can tops . I still dig a few nails almost every hunt , but not many . I don't waste my time digging pull tab /possible gold signals in a park . Because you will dig 5,000 pulltabs before you're likely to find small gold ...(That was my count 20 years back ... 5,395 tabs and pull rings in 7 months before I dug my first gold ring , and it was under 4 grams if I recall ..So I stopped digging those signals ) . Having a crop circle coil like that is not going to help you unless you go slow (With headphones) and listen for those little repeatable high toned peeps that register 2/3 on more the way down on your depth meter . Having to lug around all that extra weight is tireing & would not waste my time digging unless the target registered at least 6 inches deep . I am an old guy that is not likely to waste my little bit of energy . Unless there is likely to be a reward . JMO
+AmericanCoinHunting wow thanks. i will try that tomorrow
The button was British military issued.
maybe the ctx and your other personality would sit in the truck ....if you asked nice !