I used a different module but it is basically the same. There are a lot to choose from. Thanks for this. They sell a unit that is brand specific at my local hardware store. It is $85. This was only $10 and I have to garage doors. Saved $160.
Thank you for the video, I did two similar to this (one for the garage door and another one for the gate) but I don't have the inching mode on smartthings and I had to add a routine for auto-off after 1 second. Now I'm after a device that will give me an indication of the gate's situation. The gate has limit switches and I want to use them for that purpose. All I need is a wifi device that whether the circuit is open or closed. Do you know such a device?
I'm having troubles with mine. I connected a 12VDC power source and wish to open a 8-12V door lock. The problem is that I don't receive any usable voltage on the outlet pins after the Relay. on the back I also measured with my multimeter and no voltage on the solder on the back. The Relay does click but no power. Am I doing something wrong or die I received a bad copy?
I used a different module but it is basically the same. There are a lot to choose from. Thanks for this. They sell a unit that is brand specific at my local hardware store. It is $85. This was only $10 and I have to garage doors. Saved $160.
I have 3 button Up Stop Down so there are 6 wire behand board. How can i select 2 wire only to control the unit?
Thank you for the video, I did two similar to this (one for the garage door and another one for the gate) but I don't have the inching mode on smartthings and I had to add a routine for auto-off after 1 second.
Now I'm after a device that will give me an indication of the gate's situation.
The gate has limit switches and I want to use them for that purpose. All I need is a wifi device that whether the circuit is open or closed.
Do you know such a device?
Can this be used with a 12v house led light number? (Address number on the front house) ?
I'm having troubles with mine. I connected a 12VDC power source and wish to open a 8-12V door lock. The problem is that I don't receive any usable voltage on the outlet pins after the Relay. on the back I also measured with my multimeter and no voltage on the solder on the back. The Relay does click but no power.
Am I doing something wrong or die I received a bad copy?
Check once you connected in nc or no
Thanks for the detailed explanation! :)
im havint trouble pairing my wifi, did you had any issues?
You have to be sure you connect to 2,4GHz network. That could be your problem, but I’m not 100% sure.
Hard to understand.
香港人?