My seat is stuck recline but the forward and back and also lumbar support all work . Not the fuses and I don’t see and exposed wires under the seat . Does this still apply ?
I don’t why Chevy hasn’t had a recall. This seems to be an ongoing issue. Mine did the same thing. Took it to the dealership and they quoted me close to $500 to fix. I ordered the switch and used my points. Brought the price down to $49. Hopefully I can fix it myself 🤞🏽
I have a 2011 malibu and there are no screws that hold on the trim. When I look under seat I can see that there is a metal u-shaped clip holding it on. I have tried pulling on it but I'm afraid it's going to break. Is there a trick to these clips?
I'm having same issue in gf 14 Terrain. All switches work, I reclined it slightly when I drive it won't go back up. Did it work for you by replacing the switch panel?
The way I understand it is was stuck just in the fully reclined position. And he just couldn't get it to come back up so that would be just one switch failing. But you can't replace just the one switch you have to replace the whole mechanism..
I bought the switch I'm about to replace it now. Thanks for sharing your knowledge with the world.
Thanks man, this was super helpful. Gonna try this with a 2018 Equinox.
My seat reclines back but not forwarded
Thank you so much for sharing your experience I finally fix my car using your video and I just got it fix again thank you
My seat is stuck recline but the forward and back and also lumbar support all work . Not the fuses and I don’t see and exposed wires under the seat . Does this still apply ?
My car is doing the same thing. Did you figure it out?
Mine is doing the same exact thing did this work for any of you?
The same exact thing just happened to my drivers seat of my equinox as well 😮
I don’t why Chevy hasn’t had a recall. This seems to be an ongoing issue. Mine did the same thing. Took it to the dealership and they quoted me close to $500 to fix. I ordered the switch and used my points. Brought the price down to $49. Hopefully I can fix it myself 🤞🏽
Mines is the same too
Thanks. I'm going to give this a try.
I have a 2011 malibu and there are no screws that hold on the trim. When I look under seat I can see that there is a metal u-shaped clip holding it on. I have tried pulling on it but I'm afraid it's going to break. Is there a trick to these clips?
Thank you kind Sir!
What is the motor underneath the seat❓️its hidden underneath the carpet🤔
Seat motor is on the seat bottom. Easier to get to if you take out the seat. But try replacing the switch first.
Thank you thank you
What if the only direction it wont go is up? It moves forward and back it leans back but wont lean back up so ots vertical.
It'll be the same part that needs to be replaced.
I'm having same issue in gf 14 Terrain. All switches work, I reclined it slightly when I drive it won't go back up. Did it work for you by replacing the switch panel?
Can I use the car wash airhose🤔
Compressed air, contains some water. You want zero water on electrical parts.
Ciuld i use all purpose parts cleaner
No. All-purpose cleaners tend to be part water. You want zero water on electronics.
Can this happen and some buttons work ? My buttons all work except incline … my driver side is now stuck is the reclined position
I have the same problem. Did you figure it out?
The way I understand it is was stuck just in the fully reclined position. And he just couldn't get it to come back up so that would be just one switch failing. But you can't replace just the one switch you have to replace the whole mechanism..
Correct. All the switches are on that one piece. You can try the electronics cleaner first, and if that doesn't work, then order the switch unit.
What is that switch called? What do I ask for at the junk yard?
Power seat switch.
@@willmck1987 thanks
I'll never buy another Chevy again.
Facts
He didn’t even show how to do it🤣🤣🤣
Burn! I'll take that! I decided to make the video AFTER I figured it out.
pr໐๓໐Ş๓