Wow Antonis! Your video from your new glider is epic! Awesome solutions for DLG home builders I see. Thank you for sharing this beautiful glider's details! I am waiting for the maiden!
Like the paint job! Simple, light, and looks to be highly visible. Any chance for a video showing how you set the incidence between the wing & the horizontal? 👍
Thanks, I like it too. the flat bottom surface of the wing is parallel to the top surface of the boom, simple. If it needs adjustment you can always add a washer between the wing and the nuts of the boom either the front or the back nut.
Yes, it's nice, a bit more trouble compared to the plain arrow shaft, but looks good. I am watching you closely by the way and waiting to see how your 1m will come out, looking good so far!
Hi!!! Between the Azurreich and this one, it would be great to make a comparison! What profile did you use? Any aerodinamic analysis or just by feeling?
I don't think these two can compare but I can give it a go. I used the ag03 to ag11 airfoil, flat bottom wing so this can be a good comparison to my other 1m RE planes that I usually fly.
Great! Could you tell me how much epoxy do you prepare for each wing? I tried to do them twice and (finally) discovered that the problem that they didn't turn out well is that the amount of epoxy was very little and it didn't completely cover the wing, partly it was covered and in others there was very little, not leaving a film perfect to cover them (little epoxy) and I think if I add too much it will end up coming out of the ends
I can really tell how much, but if you try to do a light layup, the wing normally comes out with tiny pin holes, which is fine. If the epoxy comes out of the ends, its no problem, since you will trim and sand it back to where you want it to be. Ideally you should end up using approximately about the same weight as your cloth weight or even a bit less. If you end up with dry spots, just redo the vacuum adding epoxy only on the dry spots.
@@afilos the wing is built from balsa and carbon tubing. I can send you vector files for cutting and assembly photos by mail. The wing assembly weighs 80 grams with the servos. Tests will be carried out at the end of April
@@acroalex5985 sounds good! I don't build balsa any more, only foam, balsa is very sensitive to moisture. I will be more then happy to see your flying or building video's!
That's a great build 👍 A DIY 4 Ch DLG under 130g is a fantastic achievement. Looking forward to seeing it fly...
Thank you Carl, its looks good lets see how it flies now😊
Wow Antonis! Your video from your new glider is epic! Awesome solutions for DLG home builders I see. Thank you for sharing this beautiful glider's details! I am waiting for the maiden!
Thanks, I am also waiting for the maiden when the weather permits..
Finally up to these videos. Your builds just keep getting better. This one is really nice!
Thank you!
Very impressive,
Just amazing.
Thank you Michael!
Like the paint job! Simple, light, and looks to be highly visible.
Any chance for a video showing how you set the incidence between the wing & the horizontal? 👍
Thanks, I like it too. the flat bottom surface of the wing is parallel to the top surface of the boom, simple. If it needs adjustment you can always add a washer between the wing and the nuts of the boom either the front or the back nut.
absolute beauty filos.
What type of eposy you use, in what proportions. any link will be helpful.
Thanks, I use this one www.fibermaxcomposites.com/shop/epoxy-systembrr6780-h6733brslow-p-100206.html?cPath=26 and this one www.r-g.de/en/art/100110
very nice!...I like your fuse/servo area. Allows for easy servo placement...very smart! Look forward to the maiden 😎👍
Yes, it's nice, a bit more trouble compared to the plain arrow shaft, but looks good. I am watching you closely by the way and waiting to see how your 1m will come out, looking good so far!
@@afilos thanks!..I'm figuring things out as I go far as what the servo layout & fuse pod will finally be. Might try painting some mylars too..:)
Antonis it's lovely pal, lots of good ideas for the homebuilder. When's the maiden?
Thanks, as soon as the weather calms down..
Top notch Antonis. Love it!
Thank you Dan!
Hi!!! Between the Azurreich and this one, it would be great to make a comparison!
What profile did you use? Any aerodinamic analysis or just by feeling?
I don't think these two can compare but I can give it a go. I used the ag03 to ag11 airfoil, flat bottom wing so this can be a good comparison to my other 1m RE planes that I usually fly.
Great! Could you tell me how much epoxy do you prepare for each wing? I tried to do them twice and (finally) discovered that the problem that they didn't turn out well is that the amount of epoxy was very little and it didn't completely cover the wing, partly it was covered and in others there was very little, not leaving a film perfect to cover them (little epoxy) and I think if I add too much it will end up coming out of the ends
I can really tell how much, but if you try to do a light layup, the wing normally comes out with tiny pin holes, which is fine. If the epoxy comes out of the ends, its no problem, since you will trim and sand it back to where you want it to be. Ideally you should end up using approximately about the same weight as your cloth weight or even a bit less. If you end up with dry spots, just redo the vacuum adding epoxy only on the dry spots.
In my 1m apogee-ish, I used about 50g of epoxy for the whole wing with some CF tow and 25g/m2 fiberglass. Total weight about 50g.
@@ec18c Perfect! thank you having an idea I'll have to experiment, regards
@@marceloQ7530 eso quiero verlo!
Looks good. But what is wingspan?
1m my friend, take a look at the maiden ruclips.net/video/HYLUGLc2T9Q/видео.html
@@afilos nice. But now I build DLG 1500mm and weighting 150g.
@@acroalex5985 that's great, please share more details with us.
150g for a 1.5m is way to light to be strong to withstand a strong launch.
@@afilos the wing is built from balsa and carbon tubing. I can send you vector files for cutting and assembly photos by mail. The wing assembly weighs 80 grams with the servos.
Tests will be carried out at the end of April
@@acroalex5985 sounds good! I don't build balsa any more, only foam, balsa is very sensitive to moisture. I will be more then happy to see your flying or building video's!
Absolutely beautiful 👍
Thank you Simon!
Good job...
Thank you!
Super! Thank You very much for next fantastic inspirations for my #KorzanAirlines experiments :)
first sir