Price Pfister Faucet Repair - How to fix a spout leak and modify the replacement cartridge assembly

Поделиться
HTML-код
  • Опубликовано: 23 авг 2023
  • A Price Pfister Model 49E bathroom faucet is leaking from the spout. This video covers the repair steps needed to fix he leak, and also covers the modifications to the replacement cartridge that are needed to prep the cartridge for installation.
    The original valve cartridge is not available any more. A replacement cartridge is available but requires modifications depending on the old cartridge type that is in the faucet. The new cartridge has to be modified using a combination of parts from the old and new cartridge. This video covers the required cartridge modifications.
    Try getting your cartridges for free by calling Price Pfister at 1-800-732-8238.
    You will need :
    Hot Cartridge: Part # 910-0310
    Cold Cartridge: Part # 910-0320
    Retainer Nuts: Part # 962-0430
    As an Amazon Associate I earn from qualifying purchases. Thank you for your support. If you cannot get the parts for free, here are the Amazon links:
    Hot Cartridge: Part # 910-0310: amzn.to/47Gj8u1
    Cold Cartridge: Part # 910-0320: amzn.to/3OKuogc
    Retainer Nuts: Part # 962-0430: amzn.to/3QPIQGw
    Note: The new retainer nut was not needed for the type cartridge
    I had in the Model 49E. Some might need it, depending on the cartridge used in other faucets. I was able to reuse the original retainer nut.
    #faucet #DIY #plumbing
  • ХоббиХобби

Комментарии • 13

  • @ericglover5933
    @ericglover5933 12 дней назад +2

    Thank you for an excellent presentation!

  • @shaner2608
    @shaner2608 5 месяцев назад +2

    Great video!!! I appreciate it!

    • @FixItDepot
      @FixItDepot  5 месяцев назад +1

      Glad it was helpful!

  • @flyingquilterparker840
    @flyingquilterparker840 4 месяца назад

    Thank you for this video. I got the right part, I liked your instructions, but the leak was coming from the cold water handle, and replacing the valve didn't correct it. Now with the hot water handle on (which wasn't affected) the leak is still happening.

    • @FixItDepot
      @FixItDepot  4 месяца назад

      The hot water could be back feeding through a leak in the o-rings or a cartridge that is not fully tightened on the cold side. See if the o-rings were damaged or if the cold water cartridge needs to be tightened a little more. Could also be the cold water cartridge was cross threaded too. If one of the mentioned items are not causing the issue, then I am at a loss of what else it could be, please share with us if you get it figured out. Thanks.

  • @kennethwaters6154
    @kennethwaters6154 4 месяца назад

    Could you please tell me how you removed the little cap from the top of the faucet... before you used the Phillips head screwdriver. Thanks

    • @FixItDepot
      @FixItDepot  4 месяца назад

      Just pry it up with finger nail or if stuck, use small screwdriver. You can see me taking it off at 2:15 in the video. Hope this helps. Look luck with it.

    • @kennethwaters6154
      @kennethwaters6154 4 месяца назад

      Thanks for your quick reply!! I’ve tried everything to get that little cap off! Ive used a small screwdriver, pliers, etc., now I’m thinking about heating it up next!!

    • @kennethwaters6154
      @kennethwaters6154 4 месяца назад

      I’m trying some CLR Limeaway, waiting for that to soak. I won’t bother you anymore. Thank you very much!!

    • @FixItDepot
      @FixItDepot  4 месяца назад

      Let that lime away work on it and see. Could also rotate it too if careful not to scratch it.

    • @ericglover5933
      @ericglover5933 12 дней назад

      I had the same problem and used a razor blade to start the separation. Did the trick.

  • @jeremynguyen2346
    @jeremynguyen2346 9 месяцев назад

    Hey 👋