Thank you so much for this phenomenal content Julius. I'm 70% done from this model but my question is how you managed to insert the battery and the cable management after you finished designing the plane ? and where exactly to put the Receiver and the battery.
Great video Julius! The plane is beautiful, and those flare outs on your landings are amazing and make this plane glue itself to the ground perfectly on landings!
Definitely going to be building one of these next. Thanks a million for sharing and really appreciate you doing it for free to us modelers. A huge thank you!
Really nice looking plane, so tempting ... ok I'm going to down load it , but will not start until DC-3 is finished .. it is hard to even get started in the shop these days . Old age seems to have been accelerated by lock downs , but woke up on the topside of the grass so there is hope ... you take care teach the youth to build to dream of better things .
I don't know why RUclips took so long to recommend your channel to me, but I'm sure glad it did. Edit, i don't subscribe to many channels either, but you've earned a new subscriber.
this looks like the best model I have seen to diy your own f-22 and it awesome. I have a question about what size do you have to print this to make it around 1/18 scale I'm not trying to make it into a rc I'm going for more of a display piece?
Julius and Team, you have done it again. It is not my type of aircraft personally, but I admire your work and I appreciate that it flies beautifully. Superb job!!!
This F-22 Raptor with edf is not a bad idea, but if I add one 70mm edf, retractable landing gear and 2 servos for ruders and do thrust tube like in your f-18, should I or need to add cheat holes like in your other jets? And is it possible to use this one edf for f-22, f-35, f-16 and others? 12 blades edf is for 4s lipo. 1. 3400kv 2. Max Thrust 1810g / 63.85 oz 3. Max Power 1260W 4. Current 75A I know that you use FMS 6s 12 blades edf with 2700g thrust for F-16, and that f-16 weighs 1910g. But is it still possible to use edf with 1800g thrust and do some 3d?
@@JordanyMonegro muy bien ,tengo un 70% construído....excelente modelo, es el primer jet que construyo....me gustan que los modelos que construyo parezcan maquetas....y estoy muy contento con este modelo, te recomiendo también el cessna 172. Julius es un artesano del foamboard
Sir can u plsssss share the circuit diagram of the connections sir pls 16:29 pls sir I am stuck in that phase sir it’s very helpful for me if u share it pls sir
I use elevon for the tail, and normal aileron for main wing. ch1 and ch2 are for tail servos, they're using elevon setup. and ch4 is for aileron and ch4 is mixed together with ch1
I live in Colorado Springs, I'm a high school math teacher and have a aviation club. I have a student who is building the F-22, but we are stuck using foam board. I found a company in India, but fear the shipping cost would make it impractical. Do you know of any substitutes?@@JuliusPerdana
Your F-22 Raptor looked great and your landings were excellent. I was mighty impressed, far better than many of landings I've seen at RC shows Europe 🛬
Después de ver su video y decidí ensamblar también este modelo, imprimí el dibujo, y después de haber cortado las primeras partes del fuselaje, se descubrió que el tamaño de la parte inferior no coincidía con el tamaño del marco, la parte inferior resultó ser ligeramente más estrecha que el tamaño de la parte inferior del marco, el segundo marco coincide con el tamaño de la parte adicional de la parte inferior. Esto es cierto para la información, pero me gustó el modelo en su conjunto, continuaré recopilando.
it's a popular model, so I just copy from factory made one, in this case from Freewing. If there's none I will calculate it and glide test it, thanks btw
I'm glad to hear that, so the weight of the 90mm won't be an issue. But I will need to put two 3s batteries in it to complete 6s. What parts should I reinforce? In general, what do you recommend?
hi is it possible to scale down this plane so wingspan is 80mm? this is too big for me to build 😄 do i print with 8/10 aspect ratio? will it work? i assume i also use smaller prop
I'm always blown away by what you can achieve with foamboard and your ingenuity!
You are not alone, I'm totaly gobsmacked 😮
Say thankyou to the builder ,he is awesome 🛩️🛩️👍
I have a question ,,, are these plans , the real size of the plane ? do we need to enlarge the scale or anything like that ? thank you
Thank you so much for this phenomenal content Julius.
I'm 70% done from this model but my question is how you managed to insert the battery and the cable management after you finished designing the plane ? and where exactly to put the Receiver and the battery.
Another winner Mr. J!!!
Never thought a cockpit canopy would be an art form but your method is brilliant 🤩
Many thanks!
wow, never thought a foam build will have this level of detail and quality for a F-22
Great video Julius! The plane is beautiful, and those flare outs on your landings are amazing and make this plane glue itself to the ground perfectly on landings!
Thanks a lot!
Definitely going to be building one of these next. Thanks a million for sharing and really appreciate you doing it for free to us modelers. A huge thank you!
I have a question ,,, are these plans , the real size of the plane ? do we need to enlarge the scale or anything like that ? thank you
Amazing building skills, nice final product that flies beautifully! Love how slow it can fly!
Thanks a lot!
15:21 for the vacum I'm adding smal spacer from the depron under the mold. It helps to make nice edge near the table.
it has about 2 cm of built in spacer in the mold itself
My toxic trait is thinking I could follow and build this with 0 experience with foamboard or any RC aircraft experience. Truly incredible build!
Как же красиво и чётко летает модель! Отличная работа!
Really nice looking plane, so tempting ... ok I'm going to down load it , but will not start until DC-3 is finished .. it is hard to even get started in the shop these days . Old age seems to have been accelerated by lock downs , but woke up on the topside of the grass so there is hope ... you take care teach the youth to build to dream of better things .
Hope you enjoy it!
Thanks a bunch for sharing your video! I actually have a F22 that I made back in my high school days.
How do you assemble the fins with Elevon?
The best rc plane I ever seen god level work ❤❤❤❤❤❤❤❤❤❤❤❤❤
Thanks a lot dear Julius for this video , really i always saying you are the very clever models maker ..
Regarding. .
Many thanks!
Excelent airplane and great flyer! Glides so nice and flares very smooth on landings. I love it!
Glad you enjoyed it
should i put a thrust tube for edf?
What an amazing build, it really blew me away🤯! Where do you get your foam board from? Keep up the great work!
Damn bro! You are talented! AMAZING WORK BROTHA!!
I don't know why RUclips took so long to recommend your channel to me, but I'm sure glad it did.
Edit, i don't subscribe to many channels either, but you've earned a new subscriber.
Thank you, welcome aboard 😀
Beginilah jadinya kalo masterpiece ditangan Master.....
makasih
You took flat foam boards and turned them into a flying machine , now that is very impressive . 👏 ✌️
Thanks 👍
Awesome build. But why you didn't make the back tail all moving like the original plane?
Easier like this
IF you were to do EDF, what size of EDF would you use? Would you use two EDF's?
I can use a single 70mm 6S EDF with bifurcated duct so it has twin exhaust, or twin 70mm EDF
Is it ok to use a 30A esc
PLZ reply
It's a great model, but can you make a version with retractable landing gear and EDF engines?
Wow Julius!! She looks great and so aerobatic!! This might be my favorite build of yours! 👍
Thank you very much!
this looks like the best model I have seen to diy your own f-22 and it awesome. I have a question about what size do you have to print this to make it around 1/18 scale I'm not trying to make it into a rc I'm going for more of a display piece?
I finally built it! I was just wondering if ther was a cockpit alternative instead of 3d printer
no just as it is
@@JuliusPerdana great thanks! i managed to curve out the cockpit shape with foam. I loved this video
Keren om pintar sekal👍👍👍👍👍
Very beautiful model
Great as always 💐❤️🇮🇶
Thank you! Cheers!
Would love to see a EDF version!😍
I’m building it
@@theironman_man291 Do you mean you're building as an EDF? If so, which EDF unit, battery(s) & ESC are you / have you used? Thanks!
Julius outsourced his building
so many models so little time
@@JuliusPerdana Eurofighter typhoon next ?
Great plane! What performance would the EDF need to have to make the plane fly correctly?
you can use 70-80mm 12 blades 6S EDF
@@JuliusPerdana Okay thanks you for your aneswer
Julius and Team, you have done it again. It is not my type of aircraft personally, but I admire your work and I appreciate that it flies beautifully. Superb job!!!
Thank you very much!
This F-22 Raptor with edf is not a bad idea, but if I add one 70mm edf, retractable landing gear and 2 servos for ruders and do thrust tube like in your f-18, should I or need to add cheat holes like in your other jets? And is it possible to use this one edf for f-22, f-35, f-16 and others?
12 blades edf is for 4s lipo.
1. 3400kv
2. Max Thrust 1810g / 63.85 oz
3. Max Power 1260W
4. Current 75A
I know that you use FMS 6s 12 blades edf with 2700g thrust for F-16, and that f-16 weighs 1910g. But is it still possible to use edf with 1800g thrust and do some 3d?
Yes you can use a single EDF but the one that use 6S.
@@JuliusPerdana Okey.
Excellent i am waiting a long for this jet u are genius 🎉🎉❤❤❤
Brother, how many channels are four servomotors using in aileron + elevator? Does it have to set the remote aileron.
I like your video thank you for sharing knowledge about F22
How many square inches of Defron will be needed to make the Brother F-22 aircraft? Please tell me.
CW or CCW prop and motor?
Brother is using four servomotors in how many channels. Please tell me.
Now i am making the f-22 according to your tips I was visited your website that was amazing but I am using 3mm foam sheet.👌
awesome, will be lighter than mine
Gran trabajo Julius, sos un artesano!!!! El avión es fabuloso!!! Lo estoy construyendo. Estoy muy agradecido!!!👍👏👏👏
Cómo vas con la construcción?
@@JordanyMonegro muy bien ,tengo un 70% construído....excelente modelo, es el primer jet que construyo....me gustan que los modelos que construyo parezcan maquetas....y estoy muy contento con este modelo, te recomiendo también el cessna 172. Julius es un artesano del foamboard
@@guillermolaplata89 Oh excelente!! Yo pienso construirlo este fin de semana, le quiero poner un edf de 64mm.
Sir can u plsssss share the circuit diagram of the connections sir pls 16:29 pls sir I am stuck in that phase sir it’s very helpful for me if u share it pls sir
Have you ever used EDFs??
Did you use Servo Y harnesses please reply I am doing this for school project? It is mind-blowing.
yes on the aileron
How much flight time for 3s and 4s
Con u make this with edf version
Julius, what will be your next creation after the f15 and the c-17?
F-14
@@JuliusPerdana wowwwwww
Keren sekali bang, bagus rc nya
Next buat rc SU 57 bang
how much air intake is required for fms 70mm edf ?
Hey Julius how did you connect you servos for the ailerons and elevons
I use elevon for the tail, and normal aileron for main wing. ch1 and ch2 are for tail servos, they're using elevon setup. and ch4 is for aileron and ch4 is mixed together with ch1
Thanks bud@@JuliusPerdana
@@JuliusPerdana kalo mix semua boleh mas?soalnya remote saya mc6c ga support mode itu
What kind of paper to use?
Could I persuade you to make a Saab JAS 39 Gripen or it's precursor the SAAB JA 37 Viggen. Or maybe both
😃👍
which twin EDF we can use for this model
FMS 70mm 12 blade with 6S
what is the shape or airfoil of the wing
Is foamboard the same as depron foam though?
Foamboard has paper coating on it, but Depron is pure foam (XPS). We also called it Polyfoam on where I live.
Beautiful build…8inch prop with landing very smooth take off..😎
Thanks 👍
Can I used 3s 2200mah battery with 1400kv motor
Where do you order your depron foam?
I got it from a local store, where do you live? I have links for US and UK stores
I live in Colorado Springs, I'm a high school math teacher and have a aviation club. I have a student who is building the F-22, but we are stuck using foam board. I found a company in India, but fear the shipping cost would make it impractical. Do you know of any substitutes?@@JuliusPerdana
Wow, just amazing ,your skills building from scratch is fantastic, have you thought about building a WW1 bomber?
Is 6 channel radio system enough??
yes
@JuliusPerdana OK thanks brother I'm am 13 and I love the hobby of taking rc planes and u r my inspiration thank u and keep up the good work
Olá canopy não está disponível?
I recommend you to make an F-14 Tomcat
it's can be very good idea for your project
It has rudder? How can you control the direction?
no rudder
So what do you do with the planes once you're done with them?
if it survived the test I will sell it, like this F-22 is already sold. But mostly I use it for myself or on storage until ended up in a trash bin
I didn't understand how you arranged the verses
Can 70 mm EDF be installed on this model?
yes you can
@@JuliusPerdana Which parts should I change? Or have you ever worked or experimented on this? Can you share your ideas with me?
I have a question ,,, are these plans , the real size of the plane ? do we need to enlarge the scale or anything like that ? thank you
You guys were absolutely amazing..
how do I build my own from scratch, should I use blender or solidworks?
whatever that suit up for you, I choose Blender because that the only program that I know how to use it
Your F-22 Raptor looked great and your landings were excellent. I was mighty impressed, far better than many of landings I've seen at RC shows Europe 🛬
Thanks a lot!
@@JuliusPerdana you earned it, RC pilot ace ♦️ 😃👍
abis berapa polyfoam mas?
Very impressive 👏 👌 👍
I have a question 🤔 can I use in this model an EDF motor?
Yes you can
Unreal bud brilliant
Did you still use the 50 amp esc with the 4s battery
yup
Need a video about how to control rc planes perfectly need a demonstration of transmitter while flying rc planes.❤ From india
Después de ver su video y decidí ensamblar también este modelo, imprimí el dibujo, y después de haber cortado las primeras partes del fuselaje, se descubrió que el tamaño de la parte inferior no coincidía con el tamaño del marco, la parte inferior resultó ser ligeramente más estrecha que el tamaño de la parte inferior del marco, el segundo marco coincide con el tamaño de la parte adicional de la parte inferior. Esto es cierto para la información, pero me gustó el modelo en su conjunto, continuaré recopilando.
what did he use for main material? What kind of foam is that? It is not covered with paper which helps to sand for angles.
Depron foam/ polyfoam/ XPS foam/ dollar tree foam/ blue foam/ etc
Brother is using four servomotors in how many channels. Please tell me. I am Bangladeshi.
Are the servo used 180 degree🤔
no, just about 130 degree
Thank you so much for aircraft plans for free and teaching us.❤
It's my pleasure
Bro, don't bombing 9/11
can we use rudder ?
Your building skills are second to none. how do you find the CG on a scratch build ? Thanks
it's a popular model, so I just copy from factory made one, in this case from Freewing. If there's none I will calculate it and glide test it, thanks btw
hi, can I use Dys D3536-5 1450KV Bldc Motor since what you mentioned is not available in india
yes you can, use 9 inch prop
Hey Julius! i am building this F-22 and i downloaded the pilot and canopy mold but they are all really really small. how do i fix this?
change the scale to 10X or 1000%
Ini mah master segala RC. Om Jul you are awesome.
Hey Julius! Can I put a 64mm edf instead of motor prop?
of course, there's plenty of space
@@JuliusPerdana Do you believe that 64mm has the thrust necesary to fly?
yes
What is the thrust of your motor
?
about 1.5 - 2 kg
Mau tanya om, spek 3536 1200kv, 3s 2200mah terbang nya dpt brp menit om? 4s Ny brp menitan om
3 menitan saya biasanya udah turun, batere sisa 3,8 volt
@@JuliusPerdana baik terimakasih om. 🙏
can we use ducted fan motor ?
What type of paint did you use one the foam please mate?
I cover the foam with packing tapes first, and then spray it with plastic primer and finally with ordinary spray paint (duco)
Yang ditunggu2 😇akhirnya update juga 👍🏻👍🏻👍🏻
is the 3d printed size mm or inch
How do I put an ref on it
Superb 🔥when we add 6s edf and 6s battery its affect for the CG right?
CG will always the same, placement of battery and parts will be change
@@JuliusPerdana ah got it
Julius my edf 64mm its broken, im only have a ChangeSun 90mm. Do you think that is too weight for this model?
no, it will do fine, but you need to make split exhaust tube for this
I'm glad to hear that, so the weight of the 90mm won't be an issue. But I will need to put two 3s batteries in it to complete 6s. What parts should I reinforce? In general, what do you recommend?
Eres el mejor😮 saludos desde Canada
hi is it possible to scale down this plane so wingspan is 80mm? this is too big for me to build 😄
do i print with 8/10 aspect ratio? will it work? i assume i also use smaller prop
Yes, absolutely
@@JuliusPerdana do i just print in 80% size? will everything still work properly?
@@rubberbandman6641 yes it will