very well made video. I followed your technique to remove my fender trim and broke some clips too. I looked online to see how much the clips were and they all were around the 5 $5-$6 a piece range. I ended up going on amazon and found very similar, if not exact, GM clips for a fraction of the price and purchased those.
I'm not seeing the link or part numbers to the OEM fender flare plastic clips...3 different styles/sizes you mentioned in video. Can you provide those? Thanks. Good video.
I have a 2024 chevy hd in the custom trim. I want to swap the headlights, grill, and fascia over to the LTZ and up. There isn't a single video anywhere showing that conversion. Can you do one??
I have a 2022 Silverado 2500 LT. I plan to add some offroad lights to my Ranch Hand grill guard. Once you get the grill top cover off, whats the best way to route the wires into the drivers side of the engine bay where I have a second battery and switch system? Those shutters don't appear to leave much room. The Z71 skid plates make it tough to go up under the bumper. Seems they really tightened up the air flow management on this model. Thanks.
Great video. I have a 2022 2500HD. I'm installing lights on the Ranch Hand grill guard. My plan was to run the light wiring through the grill and into the driver's side of the engine bay to a switch control box. Figured I could do it by removing the grill cap like I did on my 2012. Then I saw the grill shutters I'd have to work around. Worse, I didn't see any openings into the engine bay unless there is room around the radiator. Don't want to remove the grill guard and grill just to install some lights. Did you see a path for wiring? Gonna remove the grill cap whenever it decides to get warm in Montana. Thanks.
on a High Country do you need to remove the white side pieces too as they do not come up the front between the lights and the grill? Just looking to remove the grill. thanks
Hey man I was wondering if you know of any company that makes the towing mirrors of the previous generation (2014-2018) but fit the 2020 Sierra/Silverado HD’s? Cause I am not a fan of the deer antler mirrors they designed.
The GMC looks better every generation in my opinion since the beginning for every size truck too 1/2 3/4 ton whatever I just think GMC's always look better and they make bad ass s*** back in the day like huge big block V6 is and big V12 that we're actually kind of cool I'd like to see a V6 big block build... But they ran like i6 in terms of rev range
I'm getting a nasty freaking creek when I hit bumps or turn the wheel thinking it's a upper ball joint... It's only a 1500 minivan though 😂😂😂... I'm trading it in and getting a 2500 GMC 401 gasser.... But honestly I kind of want to wait to see if they make something to compete with the Godzilla.. i need an actual big block becausez the 6.6 is not a big block.. I mean they put it LT4 in the Cadillac Escalade v who's to say they don't do it in a Silverado but you know they're not going to they're going to waste the SS badge on a freaking EV and you know it and break my heart yet again!!!! 😂 So for now the EPA hasn't ruined the big trucks except for the diesels but we'll see I'm sick of having a delete things or mod s*** to get the truck that they should have built in the first place
Thank You! A rock took out a headlight on my High Country. This will save me hours!
sorry to hear that but hope the video helps!
very well made video. I followed your technique to remove my fender trim and broke some clips too. I looked online to see how much the clips were and they all were around the 5
$5-$6 a piece range. I ended up going on amazon and found very similar, if not exact, GM clips for a fraction of the price and purchased those.
Where is the link to the video of you guys adding the Ltz headlights?
GM sure knows how to make a grill removal as complicated as possible
You da man bro. Thank you for the video. It was the only one that was detailed and it helped me do the job effectively.
No problem 👍
Great video. A tack remover works great to get those 2 part clips started. Like a clip remover but smaller.
Thanks for the tip!
I have condensation in my headlights on 2022 2500 and was going to attempt to take it out but looks like I'll be saving it for another day.
It's a lil bit of work but not terrible. Clips on the wheel well trim are the only annoying part
brilliant video. just saved what's left of my night in a grille guard install.
Awesome! Glad it helped!
exactly what im here for
Great video!
Thanks!
I'm not seeing the link or part numbers to the OEM fender flare plastic clips...3 different styles/sizes you mentioned in video. Can you provide those? Thanks. Good video.
Great video! How long is the removal process?
I have a 2024 chevy hd in the custom trim. I want to swap the headlights, grill, and fascia over to the LTZ and up. There isn't a single video anywhere showing that conversion. Can you do one??
I have a 2022 Silverado 2500 LT. I plan to add some offroad lights to my Ranch Hand grill guard. Once you get the grill top cover off, whats the best way to route the wires into the drivers side of the engine bay where I have a second battery and switch system? Those shutters don't appear to leave much room. The Z71 skid plates make it tough to go up under the bumper. Seems they really tightened up the air flow management on this model. Thanks.
I'm not sure because we didn't feed wires in that direction :(
Great video. I have a 2022 2500HD. I'm installing lights on the Ranch Hand grill guard. My plan was to run the light wiring through the grill and into the driver's side of the engine bay to a switch control box. Figured I could do it by removing the grill cap like I did on my 2012. Then I saw the grill shutters I'd have to work around. Worse, I didn't see any openings into the engine bay unless there is room around the radiator. Don't want to remove the grill guard and grill just to install some lights. Did you see a path for wiring? Gonna remove the grill cap whenever it decides to get warm in Montana. Thanks.
Unsure. I wasn't looking specifically for that. He did have a plow hooked up but I'm not sure where they ran the wires through.
on a High Country do you need to remove the white side pieces too as they do not come up the front between the lights and the grill? Just looking to remove the grill. thanks
Hey man I was wondering if you know of any company that makes the towing mirrors of the previous generation (2014-2018) but fit the 2020 Sierra/Silverado HD’s? Cause I am not a fan of the deer antler mirrors they designed.
I am not sure - I am sure some companies will come out with something but may be too early. If you find anything definitely let us know!
Great video
Can you make a video on how to remove Cliff's beard from his grill and install it onto mine?
Asking for a friend.
rofl - coming right up to a barber shop near you
The GMC looks better every generation in my opinion since the beginning for every size truck too 1/2 3/4 ton whatever I just think GMC's always look better and they make bad ass s*** back in the day like huge big block V6 is and big V12 that we're actually kind of cool I'd like to see a V6 big block build... But they ran like i6 in terms of rev range
I'm getting a nasty freaking creek when I hit bumps or turn the wheel thinking it's a upper ball joint... It's only a 1500 minivan though 😂😂😂... I'm trading it in and getting a 2500 GMC 401 gasser.... But honestly I kind of want to wait to see if they make something to compete with the Godzilla.. i need an actual big block becausez the 6.6 is not a big block.. I mean they put it LT4 in the Cadillac Escalade v who's to say they don't do it in a Silverado but you know they're not going to they're going to waste the SS badge on a freaking EV and you know it and break my heart yet again!!!! 😂 So for now the EPA hasn't ruined the big trucks except for the diesels but we'll see I'm sick of having a delete things or mod s*** to get the truck that they should have built in the first place