They should make races with little RC cars. That would be so much more interesting and would require more skill than those ridiculous ultra fast slot races.
Now i understand why my friend got so mad. It's such high detail and such high quality. I stepped on his car and he went absolutely nuts, when i looked down i saw nothing more than plastic mess, apology wasn't enough so i decided to see what he was making such fuss about.. :/
You my friend are in need of a SLA 3d Printer (fine detail vs. PLA/ABS/Nylon 1.75 fed printers). You have the engineering talent. If you already know CAD then you have a head start , but if not check out FreeCAD, 2 days and you will be building Mark Webber's 919 body shell and chassis.
You are definitely gifted. I'm curious what you do for a living. It seems you got to have pretty steady hands to do detail that small almost like a jeweler or watchmaker but anyway thanks for sharing I'm into RC cars. I have a 5th scale 1/10 scale, I just recently bought a 125th scale Kyosho mini z. And I'm enjoying being able to use it around the house with this social distancing thing going on. But that one that you've built is just on another level keep up the good work.
Wonder if it would be possible too make a like hotwheels van or similar that's a rather large 1:64th scale vehicle awd (No diffs, just gears leading too both sides + servo for steering & make it drift, no suspension too make it slightly more simple too do.)
It is not difficult to convert a 1/64 size van into a RC with the small parts used for 1/87 RC. Please challenge yourself. However, the parts are a bit expensive.
Well I'm not sure I'd manage too make it awd though too drift similar too say takara tomy drift package nano. Think I'll stick too my plan of perhaps getting a awd 1:28th scale chassis with 90mm wheelbase for my subaru impreza shelf queen body & a few other mini-z bodies i have towards summer 2020. Got a mini-z mr01 with a bad board atm. 27 mhz one from iwaver i think in it despite it being a kyosho mini-z lol. (Previous owner must have spilled something on it at some point as it's super glitchy after a small bit of range here in my apartment & in the basement so it just goes full speed suddenly after like 4 meters, despite resoldering the antenna wire & a few tries cleaning the board with chemically clean gasoline & changing crystals too 2 other sets i had it made no difference, even tried two other radios and nothing.)
Oooooooh hey✌🏻✌🏻instand Subscribed!!!! I also started the nano hobby😂 And loking for some detailed making those tiny cars... Hahaha... Coool!! Respectfull thumbs upp!!!! Salutations from swiss
Awesome job! I have built 12 HO RC vehicles. It's one thing to build a car like you did, but it's a real challenge to add the lights as you did. I am curious as to what steering servo you used, I haven't seen that one.
Definitely not easy, but what if you used a sheet of very thin rubber on the table. It's so small you can make your track rubber too for not much money. That would have to help. I want to see it wait at a rail crossing for a 1/87 train, then take off.
Did you get this from a scalextrics car? The older version not the new scale because I have that exact car in my collection so mabey I can make my own...
Or a model railroad. 1/87 is HO scale, the single most common model railroad scale in the US, so there's tons of layouts where this car would feel right at home on provided it didn't get hung up at any point.
@@kasky_RC_factory Yes you do. Model railroad scenery is incredibly easy to create. Follow Everard Junction's myriad of videos and you'll be able to create a landscape these cars will look boss in. And the best part is that you can buy readymade accessories for it since the cars are in HO scale!
One more great video about your amazing builds. Also I’m glad I’m not the only one who thought about replacing default LiPo wires to something thinner and more flexible. Do you have any tips on handling this procedure? I was afraid to overheat the tiny battery during soldering of new wires.
This time, I replaced the battery cable with a thin one that was removed from the servo. By melting the solder in a short time, it can be replaced without any problems. However, be aware that lipo batteries are dangerous.
Awesome such an artistic hand perfectly done. could you please tell me which receiver & servo module or light module you used ? also have done the micro excavator or mobile crane? could you please post the video of micro excavator in future thanks.
Back when I was a kid we thought 1/25th scale slot cars were cool. Such an advancement is SO AMAZING!!!
Ok boomer
I had HO scale slot car racing set as kid. Simply amazing that it has progressed to a RC system with a servo no less.
Even that tiny it sounds like its ready to go 😅. Thats awesome
Looks new out the box, very impressive
If I'd had seen this back in the day surrounded by my Hot Wheel cars my head would have exploded!
WELL DONE...so cool on so many levels
Haha, for sure!
awww, look at the little baby porschey! So cute! :)
I’m impressed you got working headlights and taillights too!
Absolutely incredible!!!
What a work of art .
Stefan Bellof will loving it...☝️😉
How fast can that go?
Amazing!!! The possibilities for track design in minimal space is endless. Really cool.
ๆ
The suspension test looks like he's petting it
señor su trabajo es el tope de la modificación de autos a escala diecast , una verdadera obra de arte
This is based on a 1/87 plastic model.☺️👍
4:58 i cant imagine that tiny car can be so cool like this
You do exceptional work thank you for sharing.
Totally disappointed there is no rear suspension.
Nah, just kidding, amazing build, and runs much faster than I expected.
Rear suspension🥶🤣
That amazing...i would love to have something like that
Thank you 😊👍
@@kasky_RC_factory would u sell 1
Sorry.
They should make races with little RC cars. That would be so much more interesting and would require more skill than those ridiculous ultra fast slot races.
+ TobiAnimados - Like this one here ...Ridiculous ruclips.net/video/GtwkRd6zHwg/видео.html
1/27 mini z racing has been around for a long time. they are roughly the size of a slot car.
What a work ..!! This is just amazing ....!!!
Looks so professional! Love it!
this is absolutly and totaly awesome!!!
Thanks😊👍
Way too cool 💪💪💪💪 thanks for sharing
Now i understand why my friend got so mad. It's such high detail and such high quality. I stepped on his car and he went absolutely nuts, when i looked down i saw nothing more than plastic mess, apology wasn't enough so i decided to see what he was making such fuss about.. :/
I feel sorry for your friend
If I was your friend I would no longer be your friend.
Lmfaoo 😂😂😂
Tell ur frnd he shuddnt let it lay round then lol..its so small and fragile a baby wud squish it hehe 😆
You should buy your friend another one.
That's outstanding, I love it!!!! Great work!
Beautifully done. Congratulations.
Respect your work
Dude, you're stressing me out, running it on the table top.....haha
Amazing job ! Well done !
OMG! Micro Machines became real!
You my friend are in need of a SLA 3d Printer (fine detail vs. PLA/ABS/Nylon 1.75 fed printers). You have the engineering talent. If you already know CAD then you have a head start , but if not check out FreeCAD, 2 days and you will be building Mark Webber's 919 body shell and chassis.
Ma che meravigliaa !
You are definitely gifted. I'm curious what you do for a living. It seems you got to have pretty steady hands to do detail that small almost like a jeweler or watchmaker but anyway thanks for sharing I'm into RC cars. I have a 5th scale 1/10 scale, I just recently bought a 125th scale Kyosho mini z. And I'm enjoying being able to use it around the house with this social distancing thing going on. But that one that you've built is just on another level keep up the good work.
Thank you very much. I am very happy with your comment.🥰👍
AMAZING,,,,,,,,,,👍👍👍👍👍
Wonder if it would be possible too make a like hotwheels van or similar that's a rather large 1:64th scale vehicle awd (No diffs, just gears leading too both sides + servo for steering & make it drift, no suspension too make it slightly more simple too do.)
It is not difficult to convert a 1/64 size van into a RC with the small parts used for 1/87 RC. Please challenge yourself. However, the parts are a bit expensive.
Well I'm not sure I'd manage too make it awd though too drift similar too say takara tomy drift package nano.
Think I'll stick too my plan of perhaps getting a awd 1:28th scale chassis with 90mm wheelbase for my subaru impreza shelf queen body & a few other mini-z bodies i have towards summer 2020.
Got a mini-z mr01 with a bad board atm. 27 mhz one from iwaver i think in it despite it being a kyosho mini-z lol. (Previous owner must have spilled something on it at some point as it's super glitchy after a small bit of range here in my apartment & in the basement so it just goes full speed suddenly after like 4 meters, despite resoldering the antenna wire & a few tries cleaning the board with chemically clean gasoline & changing crystals too 2 other sets i had it made no difference, even tried two other radios and nothing.)
Kazuo San! Soooooo cool!
Thank you my friend😆👍👍👍
Can you tell me what motor this kit has? Is it faster than the g55 kit? please respond, thanks!
Maybe the motor is the same. But, the gear ratio is completely different.
Oooooooh hey✌🏻✌🏻instand Subscribed!!!!
I also started the nano hobby😂
And loking for some detailed making those tiny cars...
Hahaha...
Coool!!
Respectfull thumbs upp!!!!
Salutations from swiss
I fully understand and can see every component except the drive train, where's the little motor in this thing?
Looks like it's encased under the 3d printed base, you can kind of see a silhouette of it when he showed it off
Me encantaría saber más de escala 1/87 🏎️🕹️♥️
Buen video amigo
Saludos desde Perú 🇵🇪👍🏻
Very very nice
Thanks😆👍
Awesome job! I have built 12 HO RC vehicles. It's one thing to build a car like you did, but it's a real challenge to add the lights as you did. I am curious as to what steering servo you used, I haven't seen that one.
that's was so amazing, good work
Dang, I need a C8 version.
a nail trim would help the micro rc aesthetically ;)
Tabletop LeMans series?🤔
Very Nice
Thank you 😆👍
Amazing....👍🏼👍🏼
How does it get power to the wheels? Its so cool good job.
Great video! I have a 956 being shipped right now, I cant wait.
Yes👍👍👍 This is a great kit. Please enjoy the production.
How cute it is
Сама модель Порше классная!
Good speed
My kid wants one of this kind. Is it available for sales please.
It’s Awesome 💙
Buying link?
Amazing....I need one of those!!
Thank you 😉
You can buy the kit from my friend.
See the link in the comments section.
またまたビックリ(◎_◎;) このサイズで外観崩さずに作り込むのがスゴイ！
ありがとうございます😆
かなり改造はしてますが、一応売られているキットを利用してますのでそれ程難しくはないんですよ〜👌
where do you know what to put and what you need?? are you a designer??
im a new sub had tah shared liked loved this way cool man fun too
in relation to its weight, what would be the possibility of a good friction with a surface
Definitely not easy, but what if you used a sheet of very thin rubber on the table. It's so small you can make your track rubber too for not much money. That would have to help. I want to see it wait at a rail crossing for a 1/87 train, then take off.
Awesome!
Боже мой какая малышка 😍😍😍
Спасибо😊👍
It's was really good but tire didn't grip so well. if it will fix that would be so nice RC in my view.
This is so cool
What places did you get that micro race car because I really want one
wanna ask about how to make the small gear..
The small gear are not my handmade.
that is so cool if you sell em how much
Did you get this from a scalextrics car? The older version not the new scale because I have that exact car in my collection so mabey I can make my own...
this could run on a Hotwheels track so many possibilities with this size.
Yes👍
Or a model railroad. 1/87 is HO scale, the single most common model railroad scale in the US, so there's tons of layouts where this car would feel right at home on provided it didn't get hung up at any point.
I want a diorama to drive these cars.😆 But I don't have the skills to make it myself.😅
@@kasky_RC_factory Yes you do. Model railroad scenery is incredibly easy to create. Follow Everard Junction's myriad of videos and you'll be able to create a landscape these cars will look boss in. And the best part is that you can buy readymade accessories for it since the cars are in HO scale!
was this 3d printed? id like to make something similiar do you have the files
99 dislike..people who have mental problem..
Wakakaka😂🤣
How do you charge the battery?
There is a small charge port on the back of the chassis that uses a charger for lithium-ion batteries.
Omg this is the best Man.
One more great video about your amazing builds.
Also I’m glad I’m not the only one who thought about replacing default LiPo wires to something thinner and more flexible. Do you have any tips on handling this procedure? I was afraid to overheat the tiny battery during soldering of new wires.
This time, I replaced the battery cable with a thin one that was removed from the servo. By melting the solder in a short time, it can be replaced without any problems.
However, be aware that lipo batteries are dangerous.
Cute car...but It must be expenssive🤔😄👍
Great , friend
Thanks👍
이야~!!
리스펙트합니다
Can u make these for people to buy?
My friend making this kit and sells it.☝️☺️
OK, I wznt one. PLEASE add a link to purchase in the USA
Very nice,funny.
How much it cost
How to recharge ????
There is a charging port on the bottom. Use a dedicated USB charger.
How did you get that front metal parts for servo?
You can buy kit from my friend. Please contact him. 👍 ruclips.net/channel/UCeS6GwNrZcG6dSIJXMW84DQ
MEGA!!!!!
Thank you for watching😊👍
Did the cat get your tongue?
amazing build.. its DSM?
Yes! Use a Deltang board.
How to order????
How to order sir?
You can buy kit from my friend. Please contact him. 👍 ruclips.net/channel/UCeS6GwNrZcG6dSIJXMW84DQ
Muito show cara
Thanks👍
Where can I order Passeri RC Kit?
Please ask him directly because it contains the producer's link.👍
Where do I get one?????
You can buy kit from my friend. Please contact him. 👍 ruclips.net/channel/UCeS6GwNrZcG6dSIJXMW84DQ
Amazing!!!
Awesome such an artistic hand perfectly done.
could you please tell me which receiver & servo module or light module you used ?
also have done the micro excavator or mobile crane?
could you please post the video of micro excavator in future thanks.
lovely!!!, do you sell your rc cars?
You can buy kit from my friend. Please contact him. 👍 ruclips.net/channel/UCeS6GwNrZcG6dSIJXMW84DQ
que legal!!!!!!!!!!!!!!!!!
whats the music name in first one
Need to play it on a right surface.
oh my!
I want buy it
You can buy kit from my friend. Please contact him. 👍 ruclips.net/channel/UCeS6GwNrZcG6dSIJXMW84DQ
Cool
This is not the scale 1/87 ( HO). A 1/87 scale Porsche is about 4.5 cm long.
Where can i buy the electronics?
You can buy kit from my friend. Please contact him. 👍 ruclips.net/channel/UCeS6GwNrZcG6dSIJXMW84DQ
So beautiful and small I would also make one if I know how and where to buy the parts.. Can you help me?
See video details and comments from others. I'm writing where to buy.👍