Fingers crossed for you, I have a buddy thats been on that list for ages. Department even took their P1's back for the exchange to the P2 and they still don't have them. I know for me it clears in all my holsters, but I do know my one buddy did take a dremel to his 6354 DO to make it work. You should be relatively safe on the 6354 with slight to no modification, and the 6390 RDS should be good to go right out of the box!
@@RedactedGear Well I just got an email today that says my card was charged. Looks like I'm going to see that P2 soon! I placed it September 13, 2022. Guess I picked the right place to back order. Went through Wilson Combat.
I wanted to ask if you knew if a Glock 19 with an acro would fit the 6390rds g17 version of this holster? I know that fit universally. Just wondering if there is room for the acro. Will be using x300
It hypothetically should work, I’d try to get a 19 specific 6390 first. My only concern would be the extra space for the barrel on the 17 holster as well as light “placement” being different on the 19. I have been told the following works relatively easily with minor modifications: Glock 34 holster fitting a 17 with a comp, and a Glock 17 holster fitting a 19 with a comp. Again that is all relative experiment how you please, but hypothetically it may be possible in your case. Also depends on Acro mount / slide height, as you saw in the vid mine has a ton of room.
Good question, when I bought my 6390 there was no option for optic it was just what color wrap they put on it. If it forces you to choose I would pick the holosun or similar. My Acro fits it no problem but back when I got it there wasn’t any option for that, not sure if they updated it or something?
Right now I am currently using the ISMI and OEM glock recoil springs. The ISMI came with the agency slide and I did notice that it hangs up if you limp wrist it with the acro, I am going to try the OEM spring next trip out and see what I find out. Past that though I have not had any issues with cycling with the acro.
Probably won't fit either of them with a standard slide and a bolted down dovetail, I guess the agency slide is money well spent since it also gets it down to cowitness as far back as possible.
My romeo3 sit 3.5mm higher than yours.. Will this holster fit it ? When you put your gun into the holster how much is the space between the red dot top and holster ? I want to see if also fit the romeo 3
No holster company gets any praise until the officially support Aimpoint's FLAGSHIP light with the laser. They only want to support the downgraded Aimpoint light with no laser. Sad.... Light support is more important than red dot support.
Glad I watched this first and know what I need to do to mod my DO to fit my 19 with the ACRO.
You can move the cheeto hood to upper set of holes and it should close over the ACRO
I did notice that after filming the vid lmao
Great Video! I was looking for someone to post something like this up. Thank you
Great video! Thank you! My brother has an Acro and I may buy him a 6390rds.
Thanks man!
Have mine on back order. Supposedly will ship end of January. Either way Been wanting a holster that will be able to fit the acro.
Fingers crossed for you, I have a buddy thats been on that list for ages. Department even took their P1's back for the exchange to the P2 and they still don't have them. I know for me it clears in all my holsters, but I do know my one buddy did take a dremel to his 6354 DO to make it work. You should be relatively safe on the 6354 with slight to no modification, and the 6390 RDS should be good to go right out of the box!
@@RedactedGear Well I just got an email today that says my card was charged. Looks like I'm going to see that P2 soon! I placed it September 13, 2022. Guess I picked the right place to back order. Went through Wilson Combat.
I wanted to ask if you knew if a Glock 19 with an acro would fit the 6390rds g17 version of this holster? I know that fit universally. Just wondering if there is room for the acro. Will be using x300
It hypothetically should work, I’d try to get a 19 specific 6390 first. My only concern would be the extra space for the barrel on the 17 holster as well as light “placement” being different on the 19. I have been told the following works relatively easily with minor modifications: Glock 34 holster fitting a 17 with a comp, and a Glock 17 holster fitting a 19 with a comp. Again that is all relative experiment how you please, but hypothetically it may be possible in your case. Also depends on Acro mount / slide height, as you saw in the vid mine has a ton of room.
Is this a Glock 17 w/ glock 17 safariland holster? I have a Glock 47 w/ P2 that I am trying to find similar holster for.
yup this is a 17 w/ a 17 specific holster
What optic should I select for the 6390 when ordering it, Holosun 507? There doesn’t seem to be an option for the p2
Good question, when I bought my 6390 there was no option for optic it was just what color wrap they put on it. If it forces you to choose I would pick the holosun or similar. My Acro fits it no problem but back when I got it there wasn’t any option for that, not sure if they updated it or something?
what cain of frame glock 19x or glock 17 gen 5?
Which type of 6354do do you have? Was wondering which would be best with the Glock 19x
Mine are both 6354DO for a glock 17. For the 19X you would probably want the 19 model unless you have a comp on it.
@@RedactedGear thnx. Also, how is the fitment of the acro if it was on an aimpoint acro plate on a non mos Glock?
did you change your recoil spring once you had the acro one? reliability issues with diff ammo grain?
Right now I am currently using the ISMI and OEM glock recoil springs. The ISMI came with the agency slide and I did notice that it hangs up if you limp wrist it with the acro, I am going to try the OEM spring next trip out and see what I find out. Past that though I have not had any issues with cycling with the acro.
@@RedactedGear appreciate the feedback. just found an acro instock ahah. agency has my slide atm.
Probably won't fit either of them with a standard slide and a bolted down dovetail, I guess the agency slide is money well spent since it also gets it down to cowitness as far back as possible.
My romeo3 sit 3.5mm higher than yours..
Will this holster fit it ?
When you put your gun into the holster how much is the space between the red dot top and holster ?
I want to see if also fit the romeo 3
3.5mm higher than the ACRO? If so it may be tight and require just a little bit of sanding to remove some material
No holster company gets any praise until the officially support Aimpoint's FLAGSHIP light with the laser. They only want to support the downgraded Aimpoint light with no laser. Sad.... Light support is more important than red dot support.
It sucks man I hear ya, red dots are the thing right now and I know holster companies are prioritizing that over lights :/