Wow!!! You make it look easy. Thank you so much for taking the mystery away on "how to." I will begin practising on regular 2x4s until I can get better at it. I don't own any of the tools, but I'll get whatever I can afford to, as I learn. Thank you for your post, and inspiring me!
I have a very similar wheel off a ford tractor to restore, its around 1920 with an A-model engine. The centre is four spoke but cast iron with narrow ends and single screw holes and I want to go for wood. So you've given me a lot to think about. Thanks mate.
had I not witnessed the process, I would not think this was possible. In my eyes it was toast. Thank goodness DL did not have the same mindset as mine.
I have made another video now with every stage of the process shown so you can see the cutting process on there: ruclips.net/video/Ofxw53cl6cE/видео.html
You're not supposed to cut joints, you're supposed to smoke them. Also, you should check out Matthias Wandel's channel, he'll streamline your woodworking considerably with plenty of hacks and tricks for joining wood together. You didn't need the chisel, you could have easily finished that entirely with the table saw.
Excellent work, but for the sake of all things good and nice, wear gloves when working with wet epoxy! Once epoxy sensitivity kicks in, there's no more working with the stuff, it'll leave scars.
Доброго времени суток ! Меня зовут Андрей! Я с РОССИИ возможно вы о нас плохого мнения как о стране..Но я простой трудяга из деревни которая находится на северной реке Сосьва. С детских лет на реке и на катерах ходил как с дедом так и с многими мужчинами нашей деревни. С того момента как первый раз увидел катер RIVA зародилась мечта построить такой же катер Мечтаю уже всю сознательную жизнь. Мне 43 года и дети мои тоже ждут реализации нашей общей мечты...Помогите пожалуйста с чертежами подобных лодок. У нас в стране подобные чертежи найти невозможно.Прошу откликнитесь кто может. С уважением Андрей. Спасибо вам уважаемые люди Америки.Сильной и достойной нации.
How to make a steering wheel from scratch! You ARE GOOD, my man!
Wow!!! You make it look easy. Thank you so much for taking the mystery away on "how to." I will begin practising on regular 2x4s until I can get better at it. I don't own any of the tools, but I'll get whatever I can afford to, as I learn. Thank you for your post, and inspiring me!
🔮
Brilliant! Great to see a craftsman at work
I have a very similar wheel off a ford tractor to restore, its around 1920 with an A-model engine. The centre is four spoke but cast iron with narrow ends and single screw holes and I want to go for wood. So you've given me a lot to think about. Thanks mate.
That’s beautiful man, you have some serious talent!
the furnish really made it shine! beautiful!
I dunno about how good it'll look on your boat but that wheel will look spectacular back on the old " T ". Great job !
Outstanding work done!
Excellent work my friend!!!
thats some excellent craftmanship
A pleasure to watch.
You are a Master Craftsmen .
had I not witnessed the process, I would not think this was possible. In my eyes it was toast. Thank goodness DL did not have the same mindset as mine.
thank you for show us that. I like now careful you were and how you told us everything you were going to do, before hand.
Great work!
Very good job, tk you for your video.
Wonderful Job
Brilliant!
great work
Very beautiful
Just Beautiful
AMAZING!!!!!!
Awesome dude.
What kind of wood and coating?
Nice craft! I really like the photography, the video overall is fine but you have to do something with the audio.
Great work. :)
Hail Britannia,nice job!
How did you make the first rough cut? It appeared very smooth and regular like a guided cut.
I actually used a jigsaw for this :s I didn't have a bandsaw back then so it was quite a rough cut but just done slow and steadily!
I would have liked to see how you cut the wheel
I have made another video now with every stage of the process shown so you can see the cutting process on there: ruclips.net/video/Ofxw53cl6cE/видео.html
exelente trabajo
You're not supposed to cut joints, you're supposed to smoke them.
Also, you should check out Matthias Wandel's channel, he'll streamline your woodworking considerably with plenty of hacks and tricks for joining wood together. You didn't need the chisel, you could have easily finished that entirely with the table saw.
Smoked joints, thats a new one on me! There are lots of segmented steering wheels with cut joints, it is quite common practice.
GREAT VIDEO !
WAX PAPER ANTI-STICK & FAST ORANGE FOR HANDS .
|How much for wood wheel ? ;)
Excellent work, but for the sake of all things good and nice, wear gloves when working with wet epoxy! Once epoxy sensitivity kicks in, there's no more working with the stuff, it'll leave scars.
Very beautiful but i think it's not strong enough
Wow
i would like to hang that wheel on the wall its so cool
สวยมาก
wooow😍😍😍👍👍👍
Not model T wheel
Доброго времени суток !
Меня зовут Андрей!
Я с РОССИИ возможно вы о нас плохого мнения как о стране..Но я простой трудяга из деревни которая находится на северной реке Сосьва. С детских лет на реке и на катерах ходил как с дедом так и с многими мужчинами нашей деревни. С того момента как первый раз увидел катер RIVA зародилась мечта построить такой же катер Мечтаю уже всю сознательную жизнь. Мне 43 года и дети мои тоже ждут реализации нашей общей мечты...Помогите пожалуйста с чертежами подобных лодок. У нас в стране подобные чертежи найти невозможно.Прошу откликнитесь кто может.
С уважением Андрей.
Спасибо вам уважаемые люди Америки.Сильной и достойной нации.
Строй лодки лучше для обороны от уважаемых людей из Америки.
Google Riva Boat Blueprints and don't brownnose. We Americans respect people who is proud of their own country.