Thanks for sharing. This tuning works very well. I still haven't received the RCInpower 1207 motors, but I'm using t-motor 1106 and it flies better than ever. +8 minutes with 850mA
What do you think about putting bigger motors on the Pavo20? For example 1204 or 1404? BetaFPV has a F405 AIO 20A 2-4S board, so maybe swap that with the original and go 4S with 5000-6000kv motors, any thoughts?
Hi, Thank you for the great video. With the 4S PIDS that you showed, do I need to reflash the BlueJ ESCs with the 95hz settings? Also, would it be possible to get the CLI for your 4S PID Profile, in case I missed something? Thanks again.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Thanks for sharing. This tuning works very well. I still haven't received the RCInpower 1207 motors, but I'm using t-motor 1106 and it flies better than ever. +8 minutes with 850mA
Tmotor 1106 is very efficient!! I like the 1106 5000kv. However, the output of 1207 is much more powerful.
Great build. I build Pavo20 with 2s motor also good for cinematic.
테스트 비행 감사합니다😊
저도 테스트 해봐야겠네요🥰
모타 바꾸세여~~~ 4s 는 무조건 ㅋㅋㅋㅋㅋ
@@LeslieFPV 저는 40a라 그런지 만족해요~
더 써보고 바꾸려고요😊
What do you think about putting bigger motors on the Pavo20? For example 1204 or 1404? BetaFPV has a F405 AIO 20A 2-4S board, so maybe swap that with the original and go 4S with 5000-6000kv motors, any thoughts?
Im going with 1204 5000kv motors for 4s
파보는 역시 ~ 레슬리님 👍🏻
캄사캄사 지호니임~
This is super cool, mate! I just bought this quad and think I might do your mods! Greetings from South Australia! 👋🦘
Have a nice flight. You will probably be satisfied.
Which batteries are used with the capacity?
4s 450mah 75c
Я пробовал 4s 850mah😅
@@user-CAH9l what happened?
Is this the same tune you still use, or did you update it since?
I ‘m Changed motor /AIO , therfore some different pid and filter
@@LeslieFPV you removed the 1207 5000 kv motors?
здравствуйте,elrs встроен?
есть видео сборки?
процветания тебе✌️
in this case i used dji remote 2 ( o3 rx)
Saludos que buen vuelo. Disculpa que fc Estas ocupando???
i used hakrc f4126 20a AIO ! have a nice day , bro
@@LeslieFPV ok al parecer es la misma que lleva de stock
What was the "mah" amount on the 4s battery you used?
4s 450mah 75c👍
thank you!@@LeslieFPV
I want to ask also, does it detect the cell count automatically or do I have at manual switch it? @@LeslieFPV
you can fly the pavo 20 with 4s? Thought it's only rated for 3s?
i changed motor and aio ~ LOL
What motors, kv, and aio are you using?@@LeslieFPV
@@djdubz RCI GTS 1207 5000KV,HAKRC F4126 20A/40A AIO
What aio and motors are you using now?
Hakrc f4126 aio, rcinpower 1207 5000kv !
Hi,
What is the point and advantage of going from 3s to 4s?
THANKS
pavo20 and pico are perfectly balanced...but I think the thrust will be too weak. The 4s pavo20 is great because there is no stress on thrust anymore.
@LeslieFPV how do u make it a 4s pavo? Mine gets here tomorrow and I'm stoked to try it!
@@Todd_G_FPV changed aio and motors(for 4s lipo support)
4셀에 버전에 콘덴서 들어가야하나용?
넣으면 좋아요~
Hi,
Thank you for the great video. With the 4S PIDS that you showed, do I need to reflash the BlueJ ESCs with the 95hz settings?
Also, would it be possible to get the CLI for your 4S PID Profile, in case I missed something?
Thanks again.
Do not use betafpv 1103 8500kv motors ! It really weakness. And also you changed AIO for 4s flying.
Какие пропеллеры используются?
Gemfan 2020 4balde~👍
i built a 4s. its more fun @ 100% output
Yes Motor and aio changed now 100% thruttle ~ it's very fun, agreed!
How do I get it to run 4s what’s the pids
PID and filters include vid ~