Perhaps the configurator in the future can dynamically display only supported options in the OSD menu once we set the peripheral to DJI FPV VTX rather than showing everything.
So, With the air unit and iNav flight controller connected as described, OSD works. With it connected this way, can iNav be configured to get its control inputs (throttle, pitch, roll, yaw) from the air unit (when the DJI controller is used)?
Question, first off thank you. My Question is, how do I get the DJI remote to work with Inav? I followed all steps here and it shows its connected but I don't get any stick movements in Inav. The radio and caddx are bound to each other. Im new to inav been flying DJI FPV for a little.over a year.
I have been swapped to INAV with my nazgul evoque F6. Everything working (now the osd, thx again) except the leds. Need another UART config too to work. Or anything else?
Hi Paweł, is it possible to make a video how do we use all the buttons of Dji Fpv Controller? I only got ch5, ch6, ch7 and ch8... but there are more buttons like Rec, the big with next yo power, the back and two wheels for the camera on the top the right one is clickable. How would by possible to set a Mode with those buttons?
For some reason I cant get the OSD to record in dvr play back. Yes the OSD box is ticked in the goggles. I have also accessed the subtitle file which is blank. any thoughts?
I've tried everything but can't get the dji v2 goggles to work with the matek 765 and Inav. It works and shows the picture but none of the osd information is present. I've tried different uarts but nothing is working. I've seen on other forums people with with this same FC are having this issue.
What gps module will work with a DJI air unit on a quad with a f722 flight controller like an Eachine Cvatar? I looked at comments on Banggood and the often say Beitian 180 will not work because DJI use some kind of proprietary protocol for gps modules. Will the same gps unit work with both inav and ardupilot? Thank you for your vid!
Is there a list of DJI OSD elements that will render for use with INAV / Betaflight? Everyone seems to say most won't, but not finding a list of ones that will. Surely someone has made a list by now.
So iNAV gets all the same OSD elements as betaflight? damn was hoping home arrow lol.. I just ordered new board for baro (cuase im an idiot) and new gps with compass for a 5" i am building DAVE C MiniLR .. but for now I want to put it on explorer LR as a test for now. even though flywoo doesnt say it.. it apparently has baro. only reason it could show altitude with zero satellites Wish me luck..
@@sleepingbearffg5008 I am so happy with it.. I do have home arrow.. everything works. Except position hold seems I need to calibrate compass often to work better
Great video. Please be aware that everytime you switch modes between DJI FPV and DJI Digital FPV (stupid naming convention) you have to re-bind. This is a major pain.
Looking forward to your next video. I was not aware of these additional elements you speak of. Great video, thanks!
Would be super glad to hear about that trick to show every OSD element in INAV for DJI FPV
Great video, Pawel! Thanks! 😃
Stay safe there with your family! 🖖😊
Perhaps the configurator in the future can dynamically display only supported options in the OSD menu once we set the peripheral to DJI FPV VTX rather than showing everything.
Where is the other video you mention at the end ?
Thank you Pawel! Wondering why the first six tutorials I looked at for iNav didn't mention this.
Thanks fot inav Pawel.
So, With the air unit and iNav flight controller connected as described, OSD works. With it connected this way, can iNav be configured to get its control inputs (throttle, pitch, roll, yaw) from the air unit (when the DJI controller is used)?
Question, first off thank you.
My Question is, how do I get the DJI remote to work with Inav? I followed all steps here and it shows its connected but I don't get any stick movements in Inav. The radio and caddx are bound to each other. Im new to inav been flying DJI FPV for a little.over a year.
Following
I have been swapped to INAV with my nazgul evoque F6. Everything working (now the osd, thx again) except the leds. Need another UART config too to work. Or anything else?
a handy tip for the DJI Air unit wiring is to remember: whiTe goes on Tx and gRey goes on Rx. (only works with the air unit wire, not with a vista)
Thanks! Good tip
Hi Paweł, is it possible to make a video how do we use all the buttons of Dji Fpv Controller?
I only got ch5, ch6, ch7 and ch8... but there are more buttons like Rec, the big with next yo power, the back and two wheels for the camera on the top the right one is clickable. How would by possible to set a Mode with those buttons?
I'm sorry, but I don't have the hardware to record such a video. No DJI controller over here
For some reason I cant get the OSD to record in dvr play back. Yes the OSD box is ticked in the goggles. I have also accessed the subtitle file which is blank. any thoughts?
I've tried everything but can't get the dji v2 goggles to work with the matek 765 and Inav. It works and shows the picture but none of the osd information is present. I've tried different uarts but nothing is working. I've seen on other forums people with with this same FC are having this issue.
So what is the trick then? :) Using dji vtx as peripherals i get some data, but the home direction arrow is static. Is it only me?
Thanks Pawel,🤗
Anyone know of a pre-built quad with air unit and inav / gps already setup?
I'll build you One? What frame? And receiver?
u save my brain thanks!
everything seems to work except the controller, any idea how to make that work? (DJI Radio)
never mind i forgot to enable seerial ;) just need to find out why its refusing to arm now haha
Great content thanks transitioning from quad copter is to wings and trying to learn
another very hepful video another thanks..
What gps module will work with a DJI air unit on a quad with a f722 flight controller like an Eachine Cvatar? I looked at comments on Banggood and the often say Beitian 180 will not work because DJI use some kind of proprietary protocol for gps modules. Will the same gps unit work with both inav and ardupilot? Thank you for your vid!
perfect timing pawel 👍
do you have problem with wrong coordinates on dji goggles? RTH is work properly but my coordinates shows wrong value in the goggles.
V2 goggles? DJI messed up the firmware for them
Dziękuje za pomoc
With MSP turned off, so how i get telemetry to work? (Like battery voltage)?
Because you turn on the DJI FPV mode?
@@FPVUniversity never mind, i was just stupid, not realizing that voltage monitor is off in inav by default. Flip the switch, everything worked :)
who is watching this and does not have DJI? 😅
I have a DJI Set - but i dont need Pawel for that. Dont know, why RUclips has a different oppinion about that....
I watch such content even if I do not have the tech because there is always something to learn.
🖐 me.. I Ordered dji goggles v2 but they pulled it lol
Is there a list of DJI OSD elements that will render for use with INAV / Betaflight?
Everyone seems to say most won't, but not finding a list of ones that will. Surely someone has made a list by now.
So iNAV gets all the same OSD elements as betaflight? damn was hoping home arrow lol.. I just ordered new board for baro (cuase im an idiot) and new gps with compass for a 5" i am building DAVE C MiniLR .. but for now I want to put it on explorer LR as a test for now. even though flywoo doesnt say it.. it apparently has baro. only reason it could show altitude with zero satellites Wish me luck..
How did it go?
@@sleepingbearffg5008 parts in it video
ruclips.net/video/Tp4cZVDVTJ8/видео.html
@@sleepingbearffg5008 40+ min Flight
ruclips.net/video/eTPa8zHZaR8/видео.html
@@sleepingbearffg5008 I am so happy with it.. I do have home arrow.. everything works. Except position hold seems I need to calibrate compass often to work better
@@divingfalconfpv4602 thanks for Link.. 👊👊💪💪
You also need to enable the osd into the goggles menu.
It’s possible to calibrate magnetometer on the go with dji googles?
How is it going? I am usually using top left 'left gimbal' and bottom center 'right gimbal'
Does iNav have VTX power level control like BF?
Hi.. could you please help me how to setup R9m Telemetry on Matek F504 Wing, i use arduplane, many thanks before
thank you
you are welcome and thank you for the comment
Great video. Please be aware that everytime you switch modes between DJI FPV and DJI Digital FPV (stupid naming convention) you have to re-bind. This is a major pain.
THANKS MAN!
No problem!
Thanks for the video
Thank youuu!)
You're welcome!
Thankyouu :)
thanks mate! you safe my ass!
Первый, нихуя не понятно
Thank you