Large special U-profile (cnc milling)
HTML-код
- Опубликовано: 19 май 2022
- News and current projects : / cncfrezar
DONATIONS : Go To ko-fi.com/cncfrezar
CNC Production: www.tomasruckbs.sk/
Machine: Three-axis machining center brand UDM-2216
CAD/CAM software: Cimatron 15
My video editor:Movavi Video Editor Plus
www.mvvitrk.com/click?offer_i...
I used tools from companies @Dormerpramet @Palbit_official @PokolmPremiumtools
dat nguyen cnc
Large special U-profile (cnc milling)
cnc machine operator in hindi
cnc machine job work
vmc machine operator training
millwright
cnc programmer kaise bane
cnc programming for mechanical engineering
machine operator
bmc machine
cnc machine operator training
g code
nc
laser cutting
vmc
#cncmilling #cnc #CncFrezar Хобби
Hi guys. This time it was such a simple job with a lot of chips. I hope you enjoy the video.😀
What does the percentage mean at 0:27
@@Trevorjamminjames Width of cut in % of the cutters diameter.
Your videos are a joy to watch. I would have loved to learn that. I am 71 and done my apprenticeship in 1969. This is mind blowing. Take care and stay safe everyone and keep em coming. Tom.
Thanks
You know how happy it makes me to see you make something the CORRECT way after years of being berated by my supervision when i suggested material needed to be preroughed to destress THEN finish mahcines, and not just mahcined straight to finish? It's refreshing
Youll be amazed how many people dont understand the stresses involved in materials 🤣🤣
Lo ideal un desbaste por tensiones y calentamientos en fase de desbaste
Un estabilizado en horno si es pieza de gran precisión!
Un acabado final según plano y calidades de la superficie!
No es lo mismo trabajar un f115 que un f521!!
El programador tendría que haber evitado los movimientos en vacío innecesarios!
Pieza de excelente acabado!
Love watching metall being machined like that. It's soothing 👏
Jako vždy, super video, Díky
Nice job 👍. Nice to see a real job being made with correct tooling instead of just for show tools with very little practical application in the real world.
thanks
Top notch work as always 👌
Excellent work. I already missed the videos..
Greetings from Argentina.
Thanks
You have such cool projects that you get to work on! Send some work to me in FL!
Отличная работа!
Thanks for the video.
If you are after higher mrr, I use a Seco cutter R217.29I-1640.Re-06.4A with tips RPKT1204MOT-6-M15 , MS2500 . On 250mpa steel plate , I run this at 2400rpm, 3600mm/min ,3.3mm depth of cut . This is a 40mm bullnosed cutter with 12mm round inserts. The inserts have a locater, so you get 6 positions. They make larger diameter cutters that use the same tips, but my machine lacks the torque to drive it at the same mrr.
thanks
well done
good job cncfrezar
Thanks
Here I am, watching a video of someone running a CNC mill, while I'm also running a CNC mill.... Is there something wrong with that????
No its just that machining is addictive
Great video! Make sure to stay safe with that mammoth of a machine 😅
great job as always
So Awesome
Interesting work-holding solutions.
Thanks
hello, great work! how is it with so much material removal. is the part still heat treated before finishing? no distortion of the material? Greets from Switzerland 🇨🇭 🙋♂️👍🏻💪🏻
gooood job
ako vždy pecka
Ďakujem
4:43 should be allready done? and no need cam use G41/G42 and another radius offset opsy
Really enjoyed the video.where Can i get this type of work ? Where should I search for this type of work for my machine shop?
Great Job 👍
thanks
perfect
Ничего нового или сверхъестественного я не увидел, но лайкос за труд заслуживает👍
Hi, I have a question about the 35mm cutting pass. Why was it running at such a high chip load and low depth of cut doing multiple passes? What are the differences using a single pass at a smaller chip load?
I used a slicer because those edges are very hard. I didn't want my monolithic cutter to be damaged.
@@CncFrezar Thanks for your response
Muito bom parabéns
bem obrigado
🤘🍻
👍👍👍
👍👌
Thanks
Super 👍
Thx
Cool. What CAM is it?
Greetings from Algeria, the best channel in the mechanical industry
Thanks
👍
How did you turn a 180 kg steel workpiece ?
А нормализация заготовки для снятия внутренних напряжений где? Вот и гнет после выборки большого объёма в стружку! 95% фрезеровки изменить направление обхода с попутного (как в CAM по умолчанию) на встречное и большая часть дрожака уйдет. Для нормальной детали - обдирка - всего, обработка всего в чистую да еще и при чистовом вторые тиски на столе приотпускаются, а притягиваются только после их поджаия, кроме этого еще и минимизируется площадь прижима губками вторых тисков для чистовой!
Спасибо за совет!
your CAM software definitely spends a lot of time air cutting, you should have uses a 2d type pocket or even a facing cut to rough that center run out. 2d pocket type cuts for the side relief cuts sequentially . a lot of wasted time and motion air cutting stepping in and out and sideway, probably could have saved 20% of the spindle hours easily.
THANK YOU FOR TEACHING, BUT I HAVE A QUESTION HOW TO DO SO THAT THE PIECE DOES NOT BEND OR BECOME DEFORMED?
The material needs to be annealed
@@CncFrezar you mean hardened the same thing as annealed thanks for the video btw👍🏼
@@CncFrezar afste to machine or before
@@ammarmustafa1950 it’s not the same, annealed or normalized is the right term
GOOD JOB .. show us you machine
Thanks
Gute Arbeit, wenn ich fragen darf, für wen macht ihr denn das Werkzeug, wer ist der Auftraggeber?
Hi. Darüber kann ich nicht sprechen.
Good jod bro
Thanks
Titan CNC would be like "booom half of the thickness of the material in one pass with infinite speed" :D
Who is "TITAN CNC"?😁
@@CncFrezar tito tu ruclips.net/user/TITANSofCNCvideos ak nepoznate.
@@A13tech ale veď jasné že poznám 👍😀
2:01 yes cam lol. so simple figure can write by hand cut one depth then loop it so many time you reach botton BY gcode not writing alll same lines again like cam
Kolay gelsin 🇹🇷
Чем ты занимаешься у себя на работе. Я делаю стружку 🤣
Так что нас двое 😁
I'm not a machinist, so apologize if this is obvious. Is a face mill the most efficient tool for removing this much material?
Today, there are also more effective ways of removing material. But this one is the easiest when it comes to milling.
Zajímavé že využíváte plátky několika výrobců. Já dělám v nástrojárně na DMG75 5-axis v zásobníku mám 60 nástrojů + dalších asi 15 mimo mašinu na nastrčení a všechny frézy co nejsou monolitní tak mám plátky od jedné značky (SECO) ale je fakt že dělám pouze do kalené ocely a nevím zda jiné značky nabízí plátky do kaleného s takovou životností. Moje otázka nicméně spočívá v tom. Jaký důvod máte k využívání 3-4 různých výrobců plátků?
Niektoré frézy máme aj na testovanie tak k nim máme aj nejaké plátky tak pokiaľ ich nezoderieme robíme s nimi. Tak si šetríme naše plátky. Zväčša však na nekalený materiál používame plátky Palbit a na kalený Pokolm.
Are there a lot of residues on vertical surfaces and arcs? 6:44
0,15mm
@@CncFrezar Thank you for your reply! and how do you handle it!
Great Job Dude 👏
How many hours that machining has took ?
Hi. I can't talk about machining time.
Probably a bit longer than it could have been.
From my experience with these kind of mashines and their feeds and speeds probably something like 3-5h
Please also mentioned the time of work
Likee
Tại sao không đúc một khối vừa với hình dáng của bộ phận linh kiện .mà lại phải mất công đục khoét một khối sắt lớn như vậy ?
Great work! How long did it take?
Well thank you. I can't talk about production time because I have it forbidden.
@@CncFrezar oh really, you are allowed to record the machining and upload it to youtube but are not allowed to tell how long it took? 😂
@@ipadize it took a long time. there is a big difference between showing some clips of making a part to entertain you and discussing time which can be misleading to you and a customer that may see the video/comments.. just be glad the customer even allowed them to show the part at all, most do not allow it nor do the companies making the parts.
@@ipadize I can upload some simpler parts. I always find out in advance. But no times and price.
@@ipadize tell you the truth what the big deal how long it takes people should be happy they did this video for us to watch .
Why not machined in many parts, welded together and remachined the top surface for precision?
Should be cheaper.
It's so much stronger than if it was welded!
С таким количеством стружки про нормальной программе выпуска можно в трубу вылететь. (( Вам бы фрезер попроще или строгальный для черновой обдирки. Как вариант кованую заготовку, но там от окалины фрезы летят
Machinning time sir?
отжечь после черновой обработки наверное надо было, чтобы напряжение снять!!!!!!!!!!
Vacancy is there for vmc operator??
Привет. Большой у вас расход пластин для фрез?
В зависимости от того, какой фрезер.😁
3:35 dont see any hard figures that need cam all is on drawing punch it on nc program and cut it lol
no need draw it on cam someone allready did it and print you measurements
Hello. I am Inventor. I consider buy cnc machine hire people or asking this kind of service. Can you breifly tell me how much for this kind of process.. My work size would not exceed this object. You can tell me as usd as which zero count. Thanks
Hi. Unfortunately, I can't advise you on this. I'm just a worker.
@@CncFrezar thanks for telling me. Happy day ❤️❤️
Racing yamaha 6 silindir 3000cc motor 3 turbo 14bin rpm skyline r34 gtr inciiL 💚🏁
Titanium
How much does that cnc machine cost?
I can't tell you that, I'm just a worker.
👍👍👍🤝🤝🤝🇺🇦🇺🇦🇺🇦
curvature 0.5?!
Yes 0.5mm
God that tool path for the outside looks incredibly inefficient
There must also be time for coffee😁
Das tut ja weh da zuschauen zu müssen…. Warum nimmt der kein Vollbohrer und bohrt die Löcher erst vor und dann kann er mit Spiralkreis den Fräser schonender reinhauen….
看起来很有趣,视频做的很棒👍我们是专门服务于外贸企业RUclips运营的,感兴趣的话关注一下哦,我们会给到你很专业的服务😋
2:37 line 4405 and not yet done anything lol 4405*20=88100 88kb !!! if line thats size fanuc default flash is 256kb biggest hand written i done is 8-10kb and thats writing makro with all letters symbols and some magic LOL but use it only need one liner makro call LOL
mill this edge no need cam
mill this face no need cam
mill this figure no need cam
drill these holes no need cam
chamber those same holes no need cam
thread those no need cam
all is copy paste what you allready had and do some other with them no need cam xD
What a waste of material!
সিএনসি মেশিনের যদি কেউ প্রোগ্রামিং শিখতে চাও তাহলে আমার চ্যানেলে এসে সাবস্ক্রাইব করে রাখো এখানে আমি কোর্স অনুসারে ধাপে ধাপে অল্প অল্প করে ভিডিও দিয়ে কোর্স কমপ্লিট করব একদম ফ্রিতে
ruclips.net/channel/UCNVPEEXFJbS6BEoSc2shtnw