TIMING CHAIN REPLACEMENT INSTALLATION. TIMING MARKS FORD 3.5 3.7 EDGE FLEX TAURUS FUSION LINCOLN MKX
HTML-код
- Опубликовано: 19 июн 2019
- TIMING CHAIN REPLACEMENT INSTALLATION. TIMING MARKS FORD 3.5 3.7 EDGE FLEX TAURUS FUSION LINCOLN MKX
In this video we will show you how to install timing chain and the timing marks on Ford with 3.5 V6 engine( it may work for the 3.7 v6 engine as well but double check with your manual). The same engine has been used on many Lincoln cars, and Mazda 6S and CX9 CX-9. If you need the procedure to install the timing chain and the timing marks for the Ford Lincoln Mazda Engine 3.5 3.7 this is the video for you. We demonstrated how to install timing chain and the timing marks on 2009 Ford Edge with the 3.5 engine.
This video might be helpful on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019:
Ford Edge 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Ford Flex 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Ford Explored 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Ford Taurus 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Ford Fusion 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Ford F-150 F150 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Lincoln MKX 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Lincoln MKX 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Lincoln MKT 3.5 3.7 V6 Timing Chain Installation. Timing Marks
Mazda 6S CX9 CX-9 Timing Chain Installation. Timing Marks
► Torque Wrench 3/8: amzn.to/2TIPEoM
► Braker Bar: amzn.to/2GG9Zpv
► Timing Chain Kit: amzn.to/2ULcT1h
► Timing Tool: amzn.to/2XRyO92
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. Авто/Мото
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Do you still have to bring motor to TDC if you are just changing the water pump an have the cam holders?
Where are you guys located
Hi guys im working on a ford edge 2013 3.5 L its the same job do i need new bolts when taking the gears off? Im taking the bolts off because the dot is not pointing up its pointing downward??
i never put before a timing belt on a ford flex 2011 or any vehicle and the way you explained it is very helpful and good because you got audio and video,thank you very much for your help ,luis from harrisburg PA
Excellent work and great video CONGRATULATIONS A THANKS VERY MUCH !
Smooth Operation!
Much appreciated...Im about to do my 2012 Flex Ecobooster. I'll report back soon!
Really you are nice always I watch your videos
Thank You so much for your information
The secondary sprocket cam bolt2 that you decided to buy. What is the part number and where did you find it. Thanks for all the videos you post. You help many of us :)
Great movie, perfect show. Thank you. Thanks to such mechanics, you can try to do it yourself.
I have a question.
With what force do we tighten the shaft gear with a large bolt?
How tightly do we tighten the tensioners?
How much do we tighten the slides?
I am asking YOU for information.
Спасибо огромное!
Good info.
Thanks
In the video you mentioned that you would put a link to the sprocket bolts in the description. Can you repost that linke?
Super
I ran into the same problem and had to remove that same sprocket for the clearance of the tensioner. I dont want to replace that bolt again. Did you guys replace a 2nd time? It wa only torqued for a day when i realized it.....
Life Saver! About to do mines this weekend and will update with the results :)
Updates?
@@kendrickf-d6695he didn’t make it back
@@spark413 Yep, engine blew up while he was in the garage
Es algo muy muy especial
Hey thanks for the video my only concern is that the camshaft position are not clear enough thanks again
Where are you guys located i need my timing chain replaced!
Question.
So those gold links are the same as when you woulf mark the chain when replacing head gasket?
And also another question. So when you crank the camshaft, and crankshaft to their TDC,(i don't know if my questions are even real question) and you put all the gold links to the dots, the timing is perfect?
Im about to be done opening up the car and it scares me
I like your videos guys ! How can hook up? I have a lincoln mkx 2009. Needs to locate oil leak
Does this work on the mustang too
Where dir you get the tool for the camshaft. To hold the cams in place. And what's it called
How did you guys get the engine in top dead center?
Hi Sir I don't have the special locking tools for my 2013 ford explorer 3.5 engine and am trying to replace my water pump. But I noticed something that made me stop to seek help before I continue. Immediately I took my timing chain off the left side phaser I saw the phaser turning, why is that. Have i damaged my engine?
Need your help please.
Did cam chain on my vw the gold link didn’t really matter the actuator only went on one way. The actuator wouldn’t sit properly if it wasn’t right. It the gold link is just a reference point.
Lol'd at "okay, not these two bolts"
Is this the same procedure on a 2009 ford Taurus sedan a car.? Cuz my timing chain broke but the space is limited for me to do this job.
Have i training your workshop..?
Im from indonesia
Is there a gasket for the timing chain cover?
Does that kit you have listed work for a 2011 Lincoln MKS 3.7 vin R
Also, I’m having a issue of an entire bank not firing. Timing?
Don't Buy those Cheap China Made Kits if you Plan on Keeping the Vehicle
I don't see your link for the 2015 Mazda CX9 timing chain kit
How do u find top dead center? Do u lock camshaft before finding or after? I am changing all timing chains and sprockets, so when should I lock camshaft? Before I take old chains?
The are dots for colored chain links. The dots have no “pointers” on the engine. Very few engines time at TDC now. Robotic equipment may rotate cams and the assembly position/timing position has all pistons at least as far down in bore where valves will not contact if machinery moves cams during alignment step. The spot they choose also will not have cam lobes in a position where cams will want to turn and cause issues during chain fitting. With no marks you are hosed. The cam locking tools do position cams but the bigger use of those tools is to lock cams for breaking bolts loose and torquing when cam phasers and gears are removed and installed. Once the hubs are torqued marked links on chain set timing.
When they tell you to "replace bolts" it's because the bolts are TTY (Torque to yield) which means the bolt tightened to the torque specs acts like a normal bolt, but when you add the extra 90 degrees, the bolt itself twists into it's final position.
This guy is crazy for not replacing them
What's the skinny little tool that comes with this tool for?
I have an 07 ford edge 3.5l fwd had a mechanic put new head gaskets kit, timing chain kit, and water pump on it, ran fine for about 5 miles, the thrower a vvt and camshaft sensor codes, replaced both of each part, still getting a camshaft position code, double checked timing and it was spot on please help
What was the issue?
Do you have the video of reinstalling the timing cover?
Sad
How many pound feet you tighten the bolts from the water pump, sensors and tensor ? Thanks
Water pump: 8.5-11.5 Nm
Tensioners: 8.5-11.5 Nm
Timing Chain Guides: 8.5-11.5 Nm
So basically you're safe with 10 Nm for all of those.
What if you aren't replacing the chain , Just replacing the water pump. The current chain doesn't have those gold making. Can you put it at TDC and put your own markings on the chain. Then put the chain back in the same way?
Yes thats the actual service manual procedure instructions if reusing chains.
Is there any way I can turn crankshaft on 3.5 Duratec to align #1 piston TDC without bending valves. My chain jumped time turning my motor counter clock wise when trying to remove harmonic balancer. Chains are still on. As of now, I can only turn CC about 1/4 turn in either direction then stops against what I assume are valves. Trying to get back in time before dissassambling to change water pump. Thanks in advance for any help.
Anybody have any info on this?
For a used car with unknown history, how do I inspect the chain or tensioner to determine if it was already replaced, or is near end of life? I plan to replace water pump for sure. Thanks for detailed videos!
You don’t
You would have to remove front cover and inspect the projection of the tensioner. Good is 12mm or less. I see many of these in my shop with no chain, guide, or hub issues. I am in a rural area and my customers have to drive 45 or more miles to work on light traffic roads. Most just replace everything with no inspection but they are not assured of being worn. Lots of idle time and too many miles between oil changes will wear the guides and chains. Some will have primary chain with no marks. You have to have marks for timing as there are dots but no marks to align the dots with. Crank mark will go between two links and the #1 intake is 18 3/16 inch to the middle of that link, #2 cam is 49 links away. This last distance is 1/2 link on the #1 cam dot, 48 whole links and the #2 cam dot mark goes in the middle of the 49th link. The distance is 24 1/2 inches from #1 to #2 tooth depressions in chain.
Upon a 'cold start' the chain begins to slack (stretch) over time. It will sound like a loose chain picking up slack for a second or two. Its a better sign after you get 17 codes reading cam fault and mis-fire etc. Hope that helps.
For a 2004 Chevy Malibu 2.2l
Que vien
When i took the cover off the timing chain marks were not in line..can I manually turn it clockwise until it lines up?
this is what i came for and want to know too. do you know by now?
@@ivansantamaria9320 yes I lined it up and put it back together and just tested today and it works fine
@@joechambers09how much did you turn it? Mine seems to need to be turned quite a bit.
ford spec is 180deg; not 90deg - just bought set and it says that in the paper and their video. but i am going to double check. thank you for making me pause
You guys skip the step how to removed the right side big timing belt spraket that's what I was looking for , u mess the hole video . Anyways thanks for ur video.
unscrew the sprocket bolts and the tensioner bolts. just simply take off the two sprockets, the secondary chain and tensioner as a unit in 2 seconds. they will slide right off provided that you took off the primary chain already.
How much does this repair cost?
2000$
I got a p0016 code on my 2015 Mazda cx9 3.7 with 95K , I went to drain my radiator and it looked like dirty oil coming out of drain cock at bottom of radiator
Do you think it is the water pump failed? The CX9 never got hot
The cost ,?
I thought camel need locked?
Much easier taking the engine out from the bottom
Any way to call you guys?
Why do you have to loosen and tighten the bolts that much. Why not just torque them to spec?
These are not normal bolts. This explains it better than I could www.felpro.com/technical/tecblogs/proper-installation-use-t-t-y-bolts.html
The bolts stretch slightly when tightened, it's a one time use. Always replace all the cam bolts.
They are torque to yield bolts. In simple terms - they stretch, step one ensures that the sprocket is pressed on fully, step two gives a good starting point for the bolt stretch, step three (the 90 degrees) stretches the bolt. Now the bolt has solid attachment across temperatures.
@@michaelwitmer7536 Ohh. Thanks for explaining. I woudn't have known there was so much science in to torquing down a bolt.
Ford edge limited timing chain point
Its scary thinking that bolt gone break.
I'd put a towel over that other sprocket that will be major pain slipping and hitting that LOL.
If you don't replace the secondary small chains, does it still need to be re timed?
If the cam holding tool slides in easily its timed cam to cam so technically no need for replacement. Although if your that far into the job you might as well replace what they illustrate in the video. All the tensioners and guides and chains will have wear depending on mileage. (Also very very very advised to replace the water pump.)
The water pump is actually the reason for the chain replacement. The water pump went out and I caught it right away. I talked to a couple mechanics and was told to just forget it. Once the water pump goes out the engine is screwed. But that makes no sense to me. It's a wearable part. So I'm going to go ahead and replace it. Just want sure about the cam set up. That's about the only part that intimidated me.
@@meanazzmopar1 How did your job go? Did you wind up needing to do more? I too have heard that a lot of engines had to be pulled due to bearings being screwed from the coolant getting into the oil from the seals failing in the water pump. My CX-9 over heated and shut down, I'm hoping the engine isn't toast, but I'll have to see when I start removing parts.
To change the water pump on those cars are a catastrophic 😢😢
Canadian judge sides with BIG BUSINESS that pays him= kicked out civil suits against Ford water pump inside the engine.
You tiny people! I had to pull the entire engine on one i did. Just fighting too much with space.
After Market 😒🤕😵🤯
The video not clear
You should never ever loosen anything with a torque wrench bro, or drop it
Ford genius expensive timing chain next car not to buy
FORD did not have a better IDEA = their electronic steering failure lock-up can cause children to die. = Are the judges ok with this when people take FORD to a court or any company? or do they have a total number of children to die before they make a company do the right thing? WE the people would like to know. This should be on the news not shut down by big money to judges.
those ECCPP timing kits are Cheap CHINA MADE Garbage and want last 30k miles before needing replacing again !! Buy a Good Quality Kit like MELLING !