Perfect daily driver builds. CBI changed the foot bracket on the top rack and they no longer sit flush. Top rack sits almost an inch below the cab rack. Massive bummer.
Was hopping to see the installation on the tundra as well I notice that it's pre drill on the Tacoma. the tundra I don't think it is I guess I was just curious
Put some Loc-Tite Blue 242 on those nuts. Will prevent them from walking back out in the middle of a trail on you. But you can still get them out with hand tools whenever you want.
I'm real tight for truck height in my garage- does anyone know the exact measurement from the top of the canopy to the top of the rack? I only have about 4 inches to spare...
First off, Truck looks great! I have 18 Pro and looking to purchase a Leer bed cap. Do you know inside height? Bed floor to cab ceiling? Or window clearance. Thanks.
Which model Prinsu rack goes on the Leer capper? I have my cap getting installed on my ‘19 TRD Offroad tomorrow, and it has the tracks embedded in it for a rack!
Peter Hopewell it’s called the top rack. It is the only one that does not have the wind deflection on it and it’s completely flat because it sits on top of the cap. You are going to absolutely love it.
Lorenzo Coria yes it did in the beginning. But that was because I did not buy the weather strip. I recommend the weather strip because now that it’s on there. There is no noise
The Prinsu roof rack looks great along with the light bar. I have a 2011 Tacoma silver just like this one & I hope to get done in a couple weeks. The only difference was I was thinking about using Snugtop for the cap instead of Leer.
Perfect daily driver builds. CBI changed the foot bracket on the top rack and they no longer sit flush. Top rack sits almost an inch below the cab rack. Massive bummer.
I have something similar my front rack is a Cali raised and my leer cap will have the Prinsu
Looks so dam good. Got and ARE shell on my tundra so I ordered both topper rack and cab rack. Cant wait to get mine and install them.
Hello were you ordered please
@@Rodrigues680 ordered them from prinsu.
Thank you Sr
Was hopping to see the installation on the tundra as well I notice that it's pre drill on the Tacoma. the tundra I don't think it is I guess I was just curious
How many extra cross bars did Jared have to buy to fill in all those gaps?
Question for you, what kind of track system do you have installed on the leer cap? Basically where the cap rack mounts on to
Meet usually installs the rails and there Thule
"We are not the brightest people in the world here" haha! Love the humility man. Looks great! Congrats!
Ill be installing a rack on my 2001 tacoma camper shell soon and was wondering what rails u guys used on your camper shells? Thanks!
ruclips.net/video/wlaOuhAY2Ac/видео.html
what length camper shell rack did you get? what is the measurement on the top of your camper shell?
❤️ Love the racks - love the shop.
Dizzy from the camera action. 😵💫
Put some Loc-Tite Blue 242 on those nuts. Will prevent them from walking back out in the middle of a trail on you. But you can still get them out with hand tools whenever you want.
What model is good for roof top tent? How much weight can the canopy/rack hold??. Hopefully 2 people right?
Can you put a rooftop tent on the shell?
Yes!
I'm real tight for truck height in my garage- does anyone know the exact measurement from the top of the canopy to the top of the rack? I only have about 4 inches to spare...
First off, Truck looks great! I have 18 Pro and looking to purchase a Leer bed cap. Do you know inside height? Bed floor to cab ceiling? Or window clearance. Thanks.
Please send a link to the hot glue gun please!!
Great vid! How’s the wind noise?
Watching RUclips videos of what not to do.
#Trial&Error
Freaking sweet man, 2 questions how did u install the back rack, and what kind of light bar was that?
Hey whats the weight rating on the rack for the bed topper?
What rack did you put on the truck topper? I'm not sure how to find that on their website. Thanks
www.leer.com/truck-cap/100xr
Are your seat covers the Wet Okele?
You drilled and tapped those holes???
CVR IV no they are factory, they are just under little factory strips that peel off.
what size aluminum rails are those?
How many inches front? And rear?
What roof rack is on the truck topper?, looks great
Jimmy Stone prinsu rack
Is it necessary to cut those strips you marked with the white dot?
Chetha ry no you do not absolutely have to put the weather strip back in but I like to because I think it looks better. 👍
Daniel Boriboun oh ok I didn’t feel comfortable cutting off anything from my Taco just yet.
best way is to cut holes for the risers and not cut the strip
Which model Prinsu rack goes on the Leer capper? I have my cap getting installed on my ‘19 TRD Offroad tomorrow, and it has the tracks embedded in it for a rack!
Peter Hopewell it’s called the top rack. It is the only one that does not have the wind deflection on it and it’s completely flat because it sits on top of the cap. You are going to absolutely love it.
Thank you! I can’t wait to get my truck all together!
@@danielboriboun8690 Nice looking installations! 👍😎✌️
So the video doesn't show if you had to drill the holes under the weather strip ? Or if they are pre done from the factory skipped that beat Hmmm?
george krug they are factory holes
You don't have to drill any holes. Holes are embedded in tacoma roof below plastic strips from factory.
Can you move the camera a little faster when showing the finished product?🤦🤦🤦
Does it whistle or make any noise when traveling at a high speed?
Lorenzo Coria yes it did in the beginning. But that was because I did not buy the weather strip. I recommend the weather strip because now that it’s on there. There is no noise
You still get noise, but its not near as Bad with the wind strip..
What top are you running on the 3rd gen?
Logan Holbert it’s a Leer 100xr
What lift is on silver tacoma? Thanks
Dalton Plenert Icon front and rear shocks, old man emu rear Dakar springs
Or how much weight they can hold ?
I would put only around 150-200 lbs on there. Without seeing too much of a driving difference.
Sko Utes baby!
The Prinsu roof rack looks great along with the light bar. I have a 2011 Tacoma silver just like this one & I hope to get done in a couple weeks. The only difference was I was thinking about using Snugtop for the cap instead of Leer.
1JZ 4 Life yeah I really like the look of the racks and the shell. But snug top is really good as well. I never had one but I like em too.
What model is that cap?
Ls fishing and outdoors it is the 100XR with opening side windows
If only everything we install could happens magically without having to line stuff up and move things around.
All that work and you didn’t show how you put it on
camera shakiness is rough, try a tripod next time. cool video though
Man... Are you chewing gum or something while you're filming?
Great video but ....dang the gum chewing
Chomp on that gum louder.
Don’t chew gum and film!!!
Lose the gum man ... Had to watch without sound
Your truck is nice, but your rack is junk.
how much can it hold?