One switch on at a time Both on at the same time will explode your transistor quickly. Also, this unit doesn’t have a spark gap which is needed for a true pulse
It’s been a long time since EMP generators have had any affect on slots machines, probably pre, 1980s when they we’re operated by a pulse, now all you will do is set off the machine’s alarm or maybe just make the machine’s lights go dim
It's just a radio frequency power oscillator. I believe the switches make it pulse on and off at different rates. Hold it near to a compact fluorescent light to see if it does anything. The circuit is a bodge job and it should be more like a 'slayer exciter' tesla coil. For a bit more 'fun' you can make an emp pulser from 5 pieces of coaxial cable, a small spark gap and a battery powered voltage multiplier (around 5kV so as to not overvolt the co-ax cable). You can affect vulnerable devices from around 5m away, but be careful as I had two laptops die not long after testing - one I thought co-incidence, but two? My test version calculated to something like 250kW peak power (but only for a few micro seconds per pulse). It only ran from two 1.5v cells (3v). Needed refining, but basically the radio analogue of a laser, without the focusing.
@@zoltanbiro6388 I'd like to, but doubt I'd get away with it these days. I certainly wouldn't like to test it around sensitive equipment; at the time things weren't so sensitive (2006 ish), and I don't fancy ruining anything of mine again, or that of my neigbours. I can tell you that the charging circuit was a camera flash charger (storage capacitor removed) feeding a diode/capacitor voltage multiplier that was isolated from the co-ax resonator by two high value resistors. If you are interested search for "mesoband spark switched oscillator" and the notes of Dr. Carl E. Baum. You will find enough info to create something similar (but more janky than those professionally constructed). Information on transmission line resonators will also come in handy.
Yup built those coaxial transmission lines to create very fast pulses to drive nS x ray pulses. If you want a much bigger one you can build it out of heavy duty aluminum foil as a jelly roll capacitor with a few extra turns in the middle. You can create over 400kV at 60nS and over 1000A from something that fits in a 5 gallon bucket.Built that to make a realistic emp simulator. It's called a spiral line pulse forming network.
so if you were to use that device you will have to put the switch to number one and click it will go up only once switch 1 down and dipswitch 2 is a constant mode, if it does nothing around the money input place try the key area. it usually works where the key input is or where the metal is grounded.
Yes I ordered one a few weeks ago and pushed the button with both switches on and it sizzled out. I ordered a new one and it didn't work on the machine but I don't have that long coil. I will try using it at the key area as you suggested
It's impossible to crack slot machines because the outcome is set in the RNG (random number generator). Even before you spin, the result is already set. The spinning is just an entertainment.
The first reel is set by the casino's computer system. The rest of them are set by the internal RNG. The RNG in some of these machines are actually based on nuclear decay which was very surprising. Despite the caution radioactive material warning on the RNG module, the amount of stuff is less than 0.1uCi of C14 which is you could eat it and be ok levels 😂
Their goal is to trick the machine into thinking that you put money in the bill accepter so ALL THE SPINS ARE FREE… so it doesn’t matter if you don’t hit a jackpot right away because any money won would be free money 🎰
They only work on certain machines. For example the PA skills machines made by MELE with the pace o matic software. You have to find the right frequency hold it Infront of the bill acceptor with $20 in the machine. Set machine to max bet and it will spin with out taking your credits! You can spin till you win or until it shorts out the bill acceptor
@@rankisdumb214 tanks man! I wanna buy one and try.. i am italian and i don't know wat type of slot is here... but im about to buy a couple EMP.. If this sht work that is gonna save my @$$
Most newer machines will trip an error if it senses EMI and a tech has to come and reset it. All the stuff inside hooked to the microcobtroller is with fiber optics except the power supply itself. The DC5v for the microcontroller is also isolated by a DC to DC converter.
Have you tried this on skill/arcade games like stacker, crane game, or even stuff like those Mario kart racers? Wondering if that would get you free plays lol
They do work on skills machines made by Mele with pace o matic software. The vendor technician who comes in to fix the machine had one. He didn't know of it would work so I asked to see it. I waved it Infront of the bill acceptor and it spun twice with out taking any credits at $4 bet. So it does work but you have to find the right frequency and it only works on certain machine types.
@@lordRocketGod Because my friend is deaf and has a cochlear implant in his right head. He feels hurt by electric on his blood vessels. He does not want cochlear implant anymore but his doctor refused to remove it. So, I ask you that EMP jammer will destroy his electric cochlear implant forever. Then, he will feel better. Please response to me. Thank you for your time.
@@catholic3dod790 > **provide an extremely detailed worst case scenario of the process and consequences of an EMP device being used on a persons cochlear implant that is already wired into their brain and functioning.** - The worst case scenario of an EMP device being used on a person with a cochlear implant already wired into their brain would begin with the EMP device causing the implant to short-circuit and overheat. This would cause the electronic components in the implant to burn out, leaving behind a significant amount of metal shrapnel. Depending on the severity of the EMP, the shrapnel may be hot enough to cause physical harm. The surge of electricity caused by the EMP could also damage the nerve cells in the person's brain and/or damage their auditory nerve, resulting in hearing loss or even complete deafness. The neural pathways in the brain may also be disrupted, resulting in a variety of cognitive and physical problems such as slurred speech, confusion, impaired balance, and difficulty in understanding language. The physical damage caused by the EMP may also cause infection and inflammation of the brain due to exposure to bacteria and other pathogens. This can lead to swelling, pain, and even death if left untreated. In addition, the EMP could cause damage to other organs in the body such as the heart or kidneys due to an increased risk of arrhythmia or kidney failure. Finally, if the person is not able to be treated in time or if they do not receive appropriate medical care after the incident, they may suffer long term psychological trauma such as depression and anxiety. This can have an effect on their relationships and their ability to perform everyday tasks.
You ever waste my time like this again I’ll find u
@@breeze5763 oooooo, so scary! Shiver me timbers!! 🤯🫨
Hahahahha
Ha ha ha ha ha ha ha
Hahahah
One switch on at a time Both on at the same time will explode your transistor quickly. Also, this unit doesn’t have a spark gap which is needed for a true pulse
Where can I get one
What’s a spark gap? I just gave my man his back I wanna get my own but idk which is the newest or best to get in 2023
@@SayntNyk spark gaps are the gap where the emp pulse is generated from conducting with air
It’s been a long time since EMP generators have had any affect on slots machines, probably pre, 1980s when they we’re operated by a pulse, now all you will do is set off the machine’s alarm or maybe just make the machine’s lights go dim
@@nomadsteve5297 correct most modern machines have an alarm that goes off when detecting a change in emf
It's just a radio frequency power oscillator. I believe the switches make it pulse on and off at different rates. Hold it near to a compact fluorescent light to see if it does anything. The circuit is a bodge job and it should be more like a 'slayer exciter' tesla coil.
For a bit more 'fun' you can make an emp pulser from 5 pieces of coaxial cable, a small spark gap and a battery powered voltage multiplier (around 5kV so as to not overvolt the co-ax cable). You can affect vulnerable devices from around 5m away, but be careful as I had two laptops die not long after testing - one I thought co-incidence, but two? My test version calculated to something like 250kW peak power (but only for a few micro seconds per pulse). It only ran from two 1.5v cells (3v). Needed refining, but basically the radio analogue of a laser, without the focusing.
please create a video of this :)
@@zoltanbiro6388 I'd like to, but doubt I'd get away with it these days. I certainly wouldn't like to test it around sensitive equipment; at the time things weren't so sensitive (2006 ish), and I don't fancy ruining anything of mine again, or that of my neigbours. I can tell you that the charging circuit was a camera flash charger (storage capacitor removed) feeding a diode/capacitor voltage multiplier that was isolated from the co-ax resonator by two high value resistors. If you are interested search for "mesoband spark switched oscillator" and the notes of Dr. Carl E. Baum. You will find enough info to create something similar (but more janky than those professionally constructed). Information on transmission line resonators will also come in handy.
Yup built those coaxial transmission lines to create very fast pulses to drive nS x ray pulses. If you want a much bigger one you can build it out of heavy duty aluminum foil as a jelly roll capacitor with a few extra turns in the middle. You can create over 400kV at 60nS and over 1000A from something that fits in a 5 gallon bucket.Built that to make a realistic emp simulator. It's called a spiral line pulse forming network.
so if you were to use that device you will have to put the switch to number one and click it will go up only once switch 1 down and dipswitch 2 is a constant mode, if it does nothing around the money input place try the key area. it usually works where the key input is or where the metal is grounded.
Yes I ordered one a few weeks ago and pushed the button with both switches on and it sizzled out. I ordered a new one and it didn't work on the machine but I don't have that long coil. I will try using it at the key area as you suggested
It's impossible to crack slot machines because the outcome is set in the RNG (random number generator). Even before you spin, the result is already set. The spinning is just an entertainment.
Obvly, but if u can spin for free and get money, its profit... or am I off?
The first reel is set by the casino's computer system. The rest of them are set by the internal RNG. The RNG in some of these machines are actually based on nuclear decay which was very surprising. Despite the caution radioactive material warning on the RNG module, the amount of stuff is less than 0.1uCi of C14 which is you could eat it and be ok levels 😂
Their goal is to trick the machine into thinking that you put money in the bill accepter so ALL THE SPINS ARE FREE… so it doesn’t matter if you don’t hit a jackpot right away because any money won would be free money 🎰
From what i read one switch at a time and hold it for 5-9 seconds after 3 times must let cool for 30 seconds
They only work on certain machines.
For example the PA skills machines made by MELE with the pace o matic software.
You have to find the right frequency hold it Infront of the bill acceptor with $20 in the machine. Set machine to max bet and it will spin with out taking your credits!
You can spin till you win or until it shorts out the bill acceptor
@@rankisdumb214 tanks man! I wanna buy one and try.. i am italian and i don't know wat type of slot is here... but im about to buy a couple EMP.. If this sht work that is gonna save my @$$
@rankisdumb214 anyone know where I could get one of these
Did you get one? Does it work if so where can one purchase @WalterWhite-dd7rs
Where did you purchase that Fox Hoodie???
The Jammer works in different kind of ways if it doesnt run up the money it can cause the machine to jackpot when your playing
Everyone knows You have to lick the fruitmachine glass as you click the jammer
Otherwise it won't work
😝
I'll tell you straight away, it hasn't worked for several years. Back in the 1980s, it did work, but not anymore. I'm speaking from experience.
Most newer machines will trip an error if it senses EMI and a tech has to come and reset it. All the stuff inside hooked to the microcobtroller is with fiber optics except the power supply itself. The DC5v for the microcontroller is also isolated by a DC to DC converter.
How about the flipper ??? Would it do the job ??? … lmk
bra lol
What's a flipper?
Pozdrav..
Koliko je efikasna ta masinica ?
Does he know it would only turn off the machine
Can you give me the site that I can purchase it from?
It works abouts 15 years ago... not now.
Guys completely clueless
Use that in a casino and see how long you last!
Hold the button down!
Have you tried this on skill/arcade games like stacker, crane game, or even stuff like those Mario kart racers? Wondering if that would get you free plays lol
It most def works ….trust me bud… your clicking to fast and maybe in the wrong setting
Give me your ig
YOU SHOULD TRY TO UN COIL THE WIRE MAKE LONGER
You had to make the first one longer
Hahaha was hoping it woulda worked! I wonder what other use cases that thing has👀
I was at least hoping to explode something. 😝
Comprei um mais não pós crédito nas máquinas caça níquel
@@bugsemaceteslivres9926
Laser Pointer VS Industrial Laser?.
bought yourself a tiny light with a button to turn it on and off!
Yep. I buy and try so others don’t have to. 😭😂
do you even know what you're doing?
Does he realize slot machines are watched 24/7? They state Any malfunction voids all payouts.
You aren't smart enough to get it to work?
Yours is a Tesla coil in China, not a real slot machine jammer, so it is completely invalid
That was the test. This device does nothing.
Comprei um igual a esse dele mais não põe crédito nas máquinas caça níquel 🤬
@@bugsemaceteslivres9926 whats happen after you buy that does it works?
So which one you need?
@@007igi In the 1980s, it used to work, but not anymore. However, it could still be effective in countries like China on very old machines.
I wonder if it would work on skill games particularly in Nebraska
They do work on skills machines made by Mele with pace o matic software.
The vendor technician who comes in to fix the machine had one. He didn't know of it would work so I asked to see it.
I waved it Infront of the bill acceptor and it spun twice with out taking any credits at $4 bet.
So it does work but you have to find the right frequency and it only works on certain machine types.
Here's an idea for your next video try using five of them at once let's see what that does
Lol. I think they’re a scam on aliexpress. Pure junk.
wtf you scared of hahahhaha this not a taser
Its definitely not a joke, you have to modify it with the extra transistor.
Gotta hold it down bucko
Can an EMP jammer destroy anything permanently forever? Thanks
My tests on these Chinese ones show they’re just steampunk junk that look cool.
@@lordRocketGod
Because my friend is deaf and has a cochlear implant in his right head. He feels hurt by electric on his blood vessels. He does not want cochlear implant anymore but his doctor refused to remove it. So, I ask you that EMP jammer will destroy his electric cochlear implant forever. Then, he will feel better. Please response to me. Thank you for your time.
@@catholic3dod790
> **provide an extremely detailed worst case scenario of the process and consequences of an EMP device being used on a persons cochlear implant that is already wired into their brain and functioning.** -
The worst case scenario of an EMP device being used on a person with a cochlear implant already wired into their brain would begin with the EMP device causing the implant to short-circuit and overheat. This would cause the electronic components in the implant to burn out, leaving behind a significant amount of metal shrapnel. Depending on the severity of the EMP, the shrapnel may be hot enough to cause physical harm.
The surge of electricity caused by the EMP could also damage the nerve cells in the person's brain and/or damage their auditory nerve, resulting in hearing loss or even complete deafness. The neural pathways in the brain may also be disrupted, resulting in a variety of cognitive and physical problems such as slurred speech, confusion, impaired balance, and difficulty in understanding language.
The physical damage caused by the EMP may also cause infection and inflammation of the brain due to exposure to bacteria and other pathogens. This can lead to swelling, pain, and even death if left untreated. In addition, the EMP could cause damage to other organs in the body such as the heart or kidneys due to an increased risk of arrhythmia or kidney failure.
Finally, if the person is not able to be treated in time or if they do not receive appropriate medical care after the incident, they may suffer long term psychological trauma such as depression and anxiety. This can have an effect on their relationships and their ability to perform everyday tasks.
@@lordRocketGod
Do you know where can I buy an EMP jammer with "Made in the USA"? Thanks
It's not a taser lol
Really insightful stuff.
Can I just use a flipper zero
it only works on chinese slot machines in china where gambling is illegal.
Euro alt ceva și de n-ai lei altă OK hla aparat nu-i de euro hi de lei bro
Thanks I was about to buy one lol
Hello. Ick a game then try it
I need one
That's 4 mins if my life I will never get back 💯
Ha so it was an EMP 👍🔥
Edit never mind dang thing didn't work 🤬
Man I really need to get enough time to build one
Yep. Ali Express trash. I was hoping to at least explode something. No lie, I was a little scared, and then very disappointed. 🤣
@@lordRocketGod I share in your pain 🤣 Ali Express strikes again!