ShopJimmy Universal TV Stand/Base for 37"- 55'' TVs-Install Universal TV Stand & Wall Mount
HTML-код
- Опубликовано: 2 фев 2025
- Universal TV Stand & Wall Mount for 37''-55'' TVs.
Click Here to Buy a TV Stand/Mount: www.shopjimmy.c...
Purchase the 3755 TV Stand/Base Here:
www.shopjimmy.c...
FOLLOW US:
Twitter - @ShopJimmy - / shopjimmy
Facebook - ShopJimmy.com - / shopjimmy
...............................................................................................
3755 TV Stand/Base Installation Instructions
Step 1:
• Fit plastic base cap into top (clear) side of glass base.
• Insert bottom of metal stand post into plastic base cap.
• Holding metal base plate flush to bottom (black) side of glass base, insert base bolts through bottom of metal base plate, glass base, plastic base cap, and into bottom of metal stand post. Turn base bolts clockwise with Allen key until hand-tight.
Step 2:
• Hold back (flat) side of TV plate flush against the front of metal stand post and in-line with the top 4 screw holes on stand post.
• Insert bolts through front of TV plate and stand post until bolt head is flush with TV plate.
• On back side of stand post, attach washer plate, washers and cap nuts to bolts. Tighten cap bolts until hand-tight.
*Do not over tighten, as this can damage the shape and integrity of the stand post.
Step 3:
• Using Phillips screwdriver (not included), attach TV brackets to your TV using appropriate TV bracket screws and spacers (if necessary), so that pre-installed fastening screws (on TV brackets) are at bottom.
Step 4:
• Attach TV brackets to front of stand post by resting the hooks of TV brackets on the top of TV plate (F).
• Center TV on TV plate and turn pre-installed fastening screws clockwise with Phillips
screwdriver (not included) until screws are behind the front lip of TV plate and TV
brackets are locked.
• *Should you wish to lower your TV on the stand post, simply release TV and TV brackets from TV plate, adjust TV plate height on stand post, and reinstall TV brackets to TV plate.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Thanks, I hate waiting for others to do stuff on their schedule. So this grandma found your vlog & put my own tabletop stand together. 👍🏽👍🏽❤💞💕
Am going to use this video to do my own if I can't get no one to do it
Thanks so much! Was lost until your video. Now I'm sittin' pretty watching TV on my new stand!
Really neat. I hate current HDTVs that have little corner stands that are far apart, instead of a center base stand.
IMDRanged I know it's so annoying
IMDRanged me to
I think we all do. I'm buying this stand to take care problem. ShopJimmy good company.
yeah, idk why they do that...
Should be an option to choose either or. Those crappy plastic legs that come with them arnt that hard to add in. I was limiting my TV search so much because I couldn’t find a center stand and my TV needs to be at a corner for viewing on my dresser...
first video i found when looking up how to mount my tv to a universal stand. thank you lol
if you have an older, heavier tv find a base that 1. fits the size of your tv and 2. can hold the weight of your tv.
check the back of your tv for the model number/serial number and look up the manual, it's bound to be online somewhere. there you can find what your tv weighs, then buy a stand that holds more than that.
Any suggestions on how to add a stand when the tv isn't flat? The thicker section of the tv is at the base of the television.
Thanks. That was a big help for a senior. Should be able to do this myself.
Thank you for a very thorough, precise and concise presentation.
How did you put the holes in the back of the TV itself? And if your using existing holes in the TV would you need plugs to fill them so you can screw the rail into them? Thanks..
I hate these (I call them feet) instead of the former standard TV base or pedestal stands that were always used until recent years. And if it swivels, that's even better! My very first large flat screen TV was a LG 42" that swiveled on a pedestal stand back in 2005 when they were relatively new on the market and grossly over-priced, and when many of the technical kinks and electronic quirks hadn't been worked out yet.
Now that the technology is 100% better and pricing has improved they decided to add cheap feet to the equation. I'm soooo glad to find that those HORRIBLE FEET can be replaced with what used to be a very good standard feature (a pedestal stand) and they give you the option to get back to...a pedestal-stand!!! Thank you a million! I'll have to get my son to do it (assemble my pedestal TV stand mount). Hate those legs!
Nice video. But my TV (Roku 40") does not seem to have enough places for the screws on the back. How can i get help to see whether it will work. No point in doing the whole base if teh last step cannot be done. and there is nowhere to call or to chat with.
I spend an hour screwing in the safety screws the wrong way -__- this video was very helpful
Can u also mount it on the wall?
sorry i didnt clarify , MyTV as well as my center speaker sit on my TV stand. and my center speaker is in the way of the bottom half of the TV. I was asking if I bought this kit would I get enough clearance so my speaker wasn't hindering my view. my speaker is 8 inches high and my TV is 55 inches. thanks for the link I'll go check it out.
+Matt Garris Try all repairs and troubleshooting at your own risk. Yeah, I would check the measurements listed on the product pages for the stands and then measure the height of your TV with the bezel to compare. Thanks! www.shopjimmy.com
HOW do those odd looking sound bar mounts work with a Solo 5 and an LED 32" set?
Gosh I hate ppl!! Who cares what tools were used... it got the job done!! Loved your video, this was extremely helpful for ME!
Blaupunk 108 cm use gor this model ?
Yes then price n how to buy?
Can the stand be put on an old TV?
Toshiba tv 2010 model 37e200u
This was informative. I was puzzled with one aspect of mine and your demonstration cleared it up for me.
Muy bien explicado, lo unico, que no se poner, es el último tornillo ,para sujetar, que no se mueva
Me lo podrias ,explicar
Gracias
So, you screw the two vertical brackets on back of the TV, and then you simply rest the TV on the two horizontal brackets attached to the base? The two support screws don't actually attach the vertical brackets to the horizontal ones? My concern is, isn't that a little unsafe? What happens if someone bumps into the desk it's on. Couldn't the TV potentially fall off the stand?
kmd subs just got one today. I fucking saw it wobble abit. Still has me shook.
It's the same way on a wall mount. It just hooks over the bars and then the screw screws up and keeps it from coming off. Very safe.
Will this work on a Hisense 55R7E Tv?
Can anyone tell me if the back of TVs are the same as far as mounting the bracket. I have a visit 40" an it doesn't look like the one in this video. But I need this stand desperately.
Is this table top or stand alone?
Thank you .!!! This was perfect ! 💜🔥
I have a 32" Vizio and a Bose Solo 5. Can I use those weird soundbar mounts with the Vizio and that stand?
El mío lo tengo enganchado solo en el último , se me puede dañar?
Could it hold up a 65 inch Vizio?. Please reply.
this stand is not meant for 65 inch tvs. there is a bigger stand that the brand makes for that.
@@OgreLord6294 Oh yes, the title does say 55". Thank you.
Is base made of plastic or glass
Need help with 55 Inch tv stand assembly
how much clearance will i get with a 55 inch led. i need 8-9 inches for my center
+Matt Garris Try all repairs and troubleshooting at your own risk. I am not sure exactly what you are asking. If you click this link to our stands page, you can look at the various Universal TV Stands, and check their dimensions to see if that helps. www.shopjimmy.com/tv-stands/ Thanks! www.shopjimmy.com
ShopJimmy.com universal tv stand for 55in
You also can find the one from www.fitueyes.com
I purchased this stand from Amazon $29 and got it in 2 days. Very easy to assemble 👍🏽👍🏽
I used my drill. Not sure about needle nose pliers.
@@reneebrunson1451 thanks for the help. I was trying to find a stand that was tall enough for my center channel speaker to fit under the TV. But I ended up building a shelf I instead.
How much space is there below the screen, for say, a 46" LCD? We want to raise our TV a bit above the soundbar, because it interferes with the TV's IR receiver.
Dan Notov I recommend going to the listing page found here: www.shopjimmy.com/universal-tv-stand-base-wall-mount-for-37-55-flat-screen-tvs-blank.htm You can compare the dimensions of your TV wit the dimensions of the stand. Thanks and please let us know if you have any further questions! www.shopjimmy.com
Thanks. Best damned video on this subject. Because of great video, I am going to buy from you and reward you for this help.
Thanks for putting this together. It is helpful just to watch it done so one has the mental picture for when they do it.
Does it swivel?
I'm not sure if it does but I know they have some that do and it's the same thing except it just swivels
My Dynex tv is approximately 50" and not slim...it has a little bulk in the back. Will this stand work on it?
does it tilt up and down?
This model does not have a tilt function.
I just bought a Samsung 43 Inch NU6950 6 series will this frame and base be compatible?
I can't remove standard bracket samsung ks7000. Help.
Could this hold a Samsung LNs4041D TV??
I was searching for floor stands and keep on getting when searching table stands or even wall stands.. is a floor stand for home use such a novelty in these days??
My TV looks different at the back!! I bought the stand and I'm stuck half way through building it, I don't know where to put those parts at the back, they don't fit anywhere 😡
I'm in the same boat, you get it done after?
Cost pls
Can you mount the LG c9 to this stand? Hope to hear from someone?
can someone tell me if a 55" tv will be sturdy on table top stand such as this one and will a cat be able to tip one over
anyone?
My TV has nothing at back , so how to screw the bracket on it ?
The tv stand should have brackets to attach to the tv, if not your out of luck if tv doesn’t have screw holes 🤓
I have a 55 inch curved Samsung tv. Will this work on that? Can someone pls respond.
Did it work?
Price
No Pliers. Right tool for the job always. Otherwise, great help!
how many inch is that tv?
This for any tv
I'm from Malaysia. Can I buy this?
I just want to know how long the M6 screws need to be for my TV to be attached to the brackets :( The bestbuy online parts store I ordered the universal stand from couldn't even tell me!.......... And I have their brand of TV too!! >:(
I have an old flat TV. It's a little heavy though. Is there a weight limit for that mount?
Thank you so much, this really helped me!
ok that looks cool that stand just made the tv into a giant computer screen! :) and thats what I will be doing next spring upgrading to 4k etc. :)
life could be so much easier if they just made the damn factory stands adjustable
Great but don’t use long needle nose pliers please
What if your TV hasn't got any pre drilled holes mines just a bracket ,glad I didn't buy it first would have ended up glueing it on 🤔, universal bracket my arse
Good video. Can’t stand those billionaire tv companies that cheapened TVs by adding those cheap ugly plastic legs so companies can make more money by making us buy the stand.
Thank you I feel the exact same!
This was so helpful thanks 😊
I bought this same model, how would I mount it to my wall?
Sergio Heredia LOL
lilteacupisme wow you got to be dumbest human on the earth
Watch the video
This video helped me out up my TV thanks
My stand doesnt have a mount, Iplanning to buy this base.. But my tv is 49inch, Im afraid that my tv falls down, Does Anyone have tryed this base?? the bottom part is glass, does it really support that much??
Marco Mendoza b
T.v.stand with side shelves
Abdul Shukur what do you mean side shelves like an entertainment stand
NEED TV REPAIR HELP?!
If you need help repairing your TV please comment below the ShopJimmy video or feel free to send us a RUclips message. Please include your TV model number and the symptoms or issues your TV is displaying. The more details you can include the faster and more accurate our response will be! You may also call our customer service at (877) 881-6492!
Thanks my brother
Using pliers as a wrench? Come on my guy..
NEEDLE NOSE pliers lol
Sorry, not buying anything from some barbarian
that tightens bolts with needlenose pliers.
Jess Davis Haahaa...that was funny as hell
I was thinking the same thing...I saw the pliers, and was thinking WTF? I wouldn't trust that flimsy stand anyway...Hell,No!
Lmaooooooooo i died laughing I feel same way
I kno he doin it wrong i did it wit my hands fuck that lol
My thoughts exactly probably would adjust the carburettor to increase air intake with a ball pein hammer looks like a simple 10mm wrench would do the trick. can't believe they would actually show someone using the wrong tool to build something.
no se si fiarme de alguien que aprieta unas tuercas con unos alicates..
Thank you!
Thank you for this video
Thanks
CLICK HERE TO SUBSCRIBE FOR FREE TECH SUPPORT!! ruclips.net/user/shopjimmy
ShopJimmy.com
Thank you that where to put the safety part was driving me crazy.
nice video but use the right tools next time
Nice tv stand, wrong tools!
I Saw that…too!
I can't believe they said let's do a tutorial on how to build something with the wrong tools.
okay, thanks for the quick response
"......TOO MUCH OF ANYTHING IS REVERSIBLE......!"
Thanks sir
It does not swivel, bummer.
If BobRoony would read it says 37"-55" lol.
Needle nose? The right tool for the right job... C'mon!
i am getting this week
i'm sure this works great on rinky dink tv's, but i have an 80 pound plasma. this will easily break!
Have u been saved from Hell by Jesus Christ?
needle nose pliers ftw
This music
Ikr it sounds like girls gone wild music lol
Beery good.
Ou
Can i have your tv
Tankcverigood
I'll get 2 please. :)
Thank you so much. That was very helpful