9200e Brushless Install Overview.
HTML-код
- Опубликовано: 5 окт 2024
- With the amount of comments I've recently been getting on my 9200e videos it looks like this was a popular RC this Christmas. I've had several questions inquiring about the brushless combo I installed and thought making this video showing and explaining the install steps would help get someone who is wanting to install a brushless combo in their 9200e on the right track.
If you like what you see don't forget to Like and Subscribe. Also consider purchasing from the product links to support the channel.
9200e Available Here:
Canada Link- amzn.to/3x9pUGY
USA Link- amzn.to/30LLipe
Here are Brushless Upgrades I Used:
F540 Motor / 60 esc Combo
s.click.aliexp...
www.banggood.c...
Canada Link- amzn.to/3cu2FxL
USA Link- amzn.to/3cCciu0
Recommended Servo 20g:
🇨🇦 amzn.to/3IbAa5J
🇺🇸 amzn.to/3s4t79t
🇨🇰🇯🇵🇲🇽🇮🇩s.click.aliexp...
DumboRC X6 Transmitter
s.click.aliexp...
www.banggood.c...
Canada Link- amzn.to/3CCg6Gc
USA Link- amzn.to/3DBMCcR
3S Battery I Run:
Canada Link- amzn.to/3HtZqDJ
I was just informed that it's possible your pinon gear might be pressed on without a grub screw. this would require heat to the gear to expand it enough to remove from the motor shaft.
Here's a link to a replacement gear which I would recommend to use with the new motor rather than the stock pressed on gear.
s.click.aliexp...
Check out my other videos:
/ @van_city
Subscribe:
/ @van_city
Follow My Other Social Media For More RC Content:
Van City RC Facebook Page:
/ vancityrc
Instagram:
/ van_city_rc
TikTok:
/ van_city_rc
If you would like your product featured on the channel you can contact me via email at vancityrc@gmail.com or direct message me on my Instagram page / van_city_rc
![OsamaSon - ik what you did last summer [Official Music Video]](http://i.ytimg.com/vi/4DIQDnu3mr4/mqdefault.jpg)
Very nice tutorial! These cars on brushless are an absolute blast! Ive had lots of comments about getting the grub screw off too. Sure enough the next one of these cars I upgraded (we have two different ones) didnt have a grub. Had a different pinion assembly that is pressed on. Stinks they did that! Ill post a link to a new pinion on Amazon that worked perfectly in mine that you can certainly share with the people asking you.
Really they actually went with a press on pinion? Wow that sucks.definitely send over that link I’ll make sure to share it.
Please share it
I actually had luck with his suggestion of heating pinion up with soldering iron. It took some prying but I got it off. Got the aluminum on so hope they last
Wow that thing must fly.
It sure does 😁🤣👍
Great video, I’m looking into upgrading my 9201e soon and this made it very simple for me to know what I’m getting myself into
Awesome. One thing is the pinion gear might not be the same. Since I made this video it seems like DeeRC has started using press fit pinions instead of the one I have with the gun screw. I do have a replacement pinion and all the parts I used linked in the description 👍💯
Wow that motor/esc combo is really a good deal at just over 33 bucks 🤯
Probably why I have this same combo in 3x of my brushless builds. 👍💯💥
Thanks I had problems taking the pinion gear off now I know why
Did you manage to get it off?
No I’m just gonna purchase the pinion gear in your description
had this combo on my bezgar hs101. great motor esc combo for the money.
It sure is. For the price it’s a decent setup 👍💯
Wonderful fields, my dear friend! Thank you for sharing!
Thanks 👍💯
Great tutorial Dan and thank you for showing all the links. Great video. Happy New Year to you and yours.
Thanks Rick appreciate it. Happy New Year 🥳
Cool RC, I never seen them before, great upgrades
Thanks appreciate you stopping by.
Happy New Year 👍💯💥
@@Van_City your welcome, Happy new year to you as well
thx this video helped me a lot
Awesome glad you liked it 👍💯
Nice video great explanation of how to install 👍looks like a fun truck
Thanks Ian, this truck is a fun one to run 👍💯💥
There was no set screw on my stock pinion gear/motor set up ….had to used pliers to pull it off in
Yeah, they have changed the design and are now using a press on pinion gear, which makes it slightly more difficult to change it out
Great video. Van City lessgooooo🔥🔥🔥
Thanks brother 👍💯💥
I did 9t 4370kv with 80amp esc..added metal 64 t brushless pinion
Awesome that’s a nice setup. 👍
Where did you get the 64t pinion from?
Well done bro. You can get a metal drive shaft gear to replace that plastic one. I out a Surpass 80 amp in mine so I had to dump the plastic gear. HSP bronto arms work perfect to replace those flimsy control and steering arms.
Thanks appreciate it.
Good to know about the HSP arms thanks 👍💯💥
Do you know where to get a metal gear? I found an aluminum one on Amazon but I want hardened steel
Can’t wait to see this 1 out 🤔 better glue those tyres 1st though 😂
Those tires “Pizza Slicers” are part of the fun I’m hoping to tear them off the wheels one day 🤣🤣🤣
@@Van_City 😂🤣😂🤣
Any advice on belted tires? The 70 mph tires that come glued still expand like you wouldn’t believe
I've read a lot of people putting gorilla tape on inside of wheels
Great tutorial brother! 💪🏼👍🏻🤙🏽👊🏼💯
Thanks appreciate it.
Happy New Year 👍💯💥
Alot of pinion gears do not have set scew! But they are easy with little miny butane porch and heat the gear not the shaft if possible other wise they will both expand together and you'll be right where ya started, Stuck!!
Even this model now uses a pressed on gear. Sometime last year they switched from using a set screw to secure the pinion
How would you swap motors now if I can't put the pinion on a different motor is it possible to buy a new pinion?
@@titan7105 you can buy a new pinion or just heat up the old one with a torch or use a pinion puller to remove the old one
Nice tutorial. So short, to the point and informative with no fluff.
My questions are what were your max speeds before and after the brushless upgrade? Also, do you consider this one of the better cars to do a brushless upgrade on? I have this car and was thinking about upgrading. I've never done anything like this before, but your video makes it look super do-able. The DeeRC 200E and 210E (which I don't have) are brushless versions of this car but use a smaller 2845 engine whereas you put in a much bigger, better, more powerful 540 in there. I'm jealous right now, LOL
Just found your speed run video before the brushless install and watched it. 30km/hr on 2S battery and 42km/hr on 3S. I'm still interested in your speed runs AFTER the brushless install. Thanks!
Thanks appreciate it. In the stock motor with stock 2s battery my max speed was 30 kph, with a 3s battery my max speed was 41.9 kph. With the brushless system on 2s I got 51.6 kph and 77.2 kph on 3s
With the brushless conversion make sure to order a new pinion gear as since this video they now press the gears onto the motors with no retaining screw. I believe I have a link in the video description
@@Van_City Yup, you do have the link. Thanks a million. I just watched your brushless speed run right before you answered and was coming back to say I know the answers already. Thanks for the awesome videos and especially the links t buy everything. Speed run videos are kinda long, but I'm not complaining. Slow-mo so we could see the wheels ballooning was really cool. I'll need new tires if I ever do this.
Hello, It has been a while but what kind of kit to you recommend to upgrade a DEERC 1:10 9201E? Trying to get my kid into RC. Thanks!
Hi I’ve added links in the video description of the upgrades I made to mine. You’re son will definitely like the 9021E 👍💯
thanks for that commen bc i wasnt sur e if i could upgrade it the same way
Nice how too video!!!
Thanks Brad appreciate it 👍💯
I ordered the servo but it was DOA. Tried another but was too big. Could you please link one that'd fit that's actually good quality?
The servo I have linked in the description is the only one I have looked into that fits. I’ll see if I can find another one
Nice 🙂👍
Thanks 👍💯💥
Dumborc always 👊🏻👍🏻
Hard to beat for the price 👍💯💥
I know this is an old video but, do you have any ideas on where to get metal parts for these? Can't find anything close to the parts :(
Looks like there’s a few metal upgrades available on this listing from AliExpress
a.aliexpress.com/_mrT16yc
You have them on enoze rc website
No grub screw on my 9205e either. Looks press fit.
Seems like Deerc in the past 6 months have changed their pinions to a pressure fit
what 3s battery do you run in this? Do you have a link for it?
Awesome video! keep up the good work!
Hey I just posted a link on the Van City RC Facebook page for you. I see you’re Canadian which is perfect the battery I use is sold on Amazon Canada $20 prime shipping. I’ll also drop a link in the video description.
Thanks for stopping by 👍💯🇨🇦
@@Van_City Awesome thank you very much! I'll give the Facebook page a like! Do you use the stock charger for those 3s batteries?
@@KA009 I’ll rarely use the stock usb style chargers that come with RC’s. the one that would’ve come with the 9200e is only good for 2s batteries.
I just recently reviewed a charger that is awesome from GT Power. If you scroll down a few videos on my list you’ll see the C6D Pro. 👍💯
Hi, is there a difference with the 550 brushless and 3660 brushless motors? Or is it just the name?
And them tyres ballooned pretty bad at the end 😧
The size is different Between the two motors. Though I haven’t looked into it myself others have said that the 550 brushless just has a bigger casing and the motor itself is actually not bigger
Is this similar to the 9206e?
I believe it’s basically the same rc with a different shell
This was an Amazing Tutorial Thank You .. Just one question If I do this setup do i have to upgrade the Remote my Holyton rc came with ? ..
Thanks, Yes if you’re converting to brushless you will need to upgrade the transmitter receiver and the ESC
I do have all the parts I used listed in the description of the video
Thank you for the fast reply 🙏 will check them out!!
What kind shocks did you end up using and where did you buy them from
These are the stock shocks, I’ve yet to upgrade them
Va bene anche un servo per macchinine 1/10 ?
Yes if you are able to sort out a way to mount it then it should work
Hi, I have a surpass hobby f540 4370kv with a 45amp in that little guy, and I was thinking what battery should I place in there?
You could probably run a 3s battery, just confirm with the esc info that it’s rated for 3s.
@@Van_City Thanks!
How do I reconnect my lights everything else works don’t know where to plug my lights.
You could probably solder a red jst connector to the lights and plug it into an open channel on the receiver. I’ve done that for a few of my RC’s
Do you have a place to upgrade adjustable links these plastic are horrible
@@hollywoodsoles2804 found these
amzn.to/3WHk2Bz
What kind of shocks did you get and where from
These are the stock shocks I’ve yet to upgrade them
Hey, so I have the Deerc 9200e and I was wondering if the M0200 20g 3.5kg Metal Gear mini Servo would fit
This is the correct size but you need a 5 wire servo if you have the stock electronics. I’ll have a look and see if I can find one. I’ll let you know
@@Van_City I am converting my Rc car into brushless so 3 wire will do
@@J2Goated1 Awesome
I have links to my upgrades In the video description 👍💯
@@Van_City also I’m very confused about the 20g 3.5kg part
@@J2Goated1 I’ve always looked at the first measurement as the size (20g) and the second as the steering torque (3.5kg)
Thank you for the video. You helped me alot! Did a few of the upgrades melted stock plastic spur gear. Do you know where I could find a hardened steel one?
Glad it was helpful. I did a quick google search and it looks like there’s a few Chinese online stores that carry the metal spur gear.
I came across the same. So you didn't have any trouble with the plastic gear?
@@thefirstone3077 so far I’m still using the original gears
How?! Steel on plastic? I upgraded from the stock 45 esc to a 60 which actually came with the motor which is a3650 I believe same size as your 540. I did go for the Dumbo reciever and remote which is pretty great btw. Thank you. Since I upgraded I melted 2 plastic spur gears with the stock steel pinion. First one on 2s batteries second on 3s. 3s only lasted about 5mins. Upgraded to aluminum pinion and spur. Took a bit of fabrication but it lasted through the 2s. Threw in the 3s and it ran and did wheelies than started making familiar noise. I haven't taken it apart yet but I'm guessing I destroyed the aluminum spur. Lol I'm praying that the steel one I got actually holds up but the ends of drive shaft gears only make about half a much contact where they meet differentials so I'm guessing those are going to get demolished next... wish me luck! Truly don't know how your plastic spur held up. How much have you driven it like that??
@@thefirstone3077 I’ve driven it probably 20 times with the brushless setup and haven’t stripped anything yet
Motor pinion ?
Link in the video description
No matter the glue I’ve used it’s not keeping the tires from spreading. Do you have a recommendation for a new set of tires that will handle 70+mph?
70mph that’s insane 👍💯. I’ll have a look around and see what I come up with
@@Van_City there is a hobby shop down the road I’ll also check out… they advertise Traxxas but I’m hoping I can find a few other things that this thing needs. It’s going to explode the first time I hit something.
@@joshuahay490 There are also spare parts available on Aliexpress s.click.aliexpress.com/e/_ApmTix
The new tires are awesome btw
I was thinking about upgrading to a brushless motor but this is fast enough for what I do with it. First time out I broke a upper swing arm in the front. I would like to upgrade the structural parts. All I can find is the cheap plastic replacement parts, do you know of any or parts that could work to replace the plastic with aluminum
I’ve looked as well and was only able to find the plastic parts. However someone did inform me about some interchangeable metal parts from another RC. I’ll have a look tonight and see if I can track down that info
@@Van_City I've been looking but I'm not very familiar with all these parts
I've had a lot of luck looking up px9200 parts on Amazon. Lot of aluminum upgrade options
Where the videos of it driving ??
I have plenty of videos of this one in action including speed testing with the brushless system installed
@@Van_City I want to see them
@@prettyboiwill5041
ruclips.net/video/43hV05ZuoC8/видео.html
I do not have grub screw… how am I going to get this thing off?
They have since started using pressed on gears. You can heat up the gear and pry it off or get a replacement gear
@@Van_City worked well
I hang the motor using needle nose pliers, and hammer downwards with a likesize pin.comes right out
I'm gonna try that. Thank you
Man im hoping to find someone to share how to convert mjx/ hosim H07 to brushless. Im a total newbee. Any tips or on who to go to for this info?
Not too difficult, if you follow what I did to this model it should guide you. Any questions feel free to reach out
@@Van_City thank you for the quick reply, I understand there’s different engine sizes. Maybe ill need a new controller? Will this set up also fit my 1/16 hosim H07?
Hey, if you look in the description they’ll be a link to my Facebook page. Why don’t you send me a message through the page and I’ll definitely be able to help you out
@@Van_City thank you 🙏🏼
Will the same motor/esc work on the 9201E?
Yes it will, a few guys have done it in the 9201E
@Van_City awesome I appreciate the response
@robertthomas9716 no worries, Happy New Year 🥳
Cool video, you have to subscribe right away. ..
Thanks appreciate it 👍💯💥
Overkill?
💯% overkill 🤣🤣
That’s what makes it so fun 😂
@@rcchallenge8626 exactly 👍💯😁
Naww he's good
Lock differential..way better
Agreed I do need to lock the diffs 👍💯
@@Van_City only back differential. Both it won't steer.
I keep snapping axels… any advice on upgrades?
Are you snapping the axel shafts themselves?
Yes
@@joshuahay490 jeez those are already decently thick axels. I’ll have a look but you might have to see what’s out there that’s thicker in the same length
@@Van_City GoolRC 9200 replacement axels seem to be a bit beefier. Information for those who put too much power in these 9200e’s like I have.
@@joshuahay490 good to know I’ll look into those as well 👍💯
Servo
Check the video description. I have a link to the servo there 👍
just sent you a message on your facebook with the shocks i used.
Awesome those look perfect 👍💯
Could you please send me the link to I'd like to know where what shocks fit this
@@bikergalf8448 it wont let me post the link here