I saw your design a few weeks ago and started to make it. Would love a video on your circuit board design and programming. Really cool idea, and it looks awesome!
@@victorroda8034 I agree, because if you click on the link it takes you to the printables site and then says it's part of the upcoming printer so there aren't any stls that i can see
Excellent project. What I liked the most was the "wire box" under everything, making it more organized. About the display, is it adaptable for a LCD 16x2 screen?
Hello could you please please make a detailed video of electronics integration , list of components and pcb design/code it would be very helpful for us
Hello everything is fine? Firstly, I would like to congratulate you on the project. Projects like this can make a difference by helping people recycle plastic. I'm having trouble finding the 400 V 10uF capacitor. Could I replace it with another one? If so which one?
I would really love to build this, but the STL files are not available on printables and I know nothing about the electronics. Do you have a complete files and start to finish instructions with circuit boards, controls and all?
Gostei muito do seu trabalho, simplesmente incrível. estou tentando reproduzir em minha casa. você poderia por favor, listar a descrição dos modelos dos eletrônicos que você usou nesse projeto ? qual paca controladora e qual motor usou ?
Hi there. Looks like a much more elegant design than the machine I designed. One question tho. How thick is your strip that you get from bottles? My cutter makes the 8mm strips but it results in a larger hole inside the filament that I would like (I compensate with increased flow) but most importantly, I cannot splice it because it unwinds when heated to melt.
Hi. I want to ask only. What with an electricity consumption? You must pay eletricity for heat gun, compressor and machine. Its still cheaper to make own filament as buy it? On another side, there is no PET filament in shop and then its not so much waste from bottles.
Excelente proyecto, pero el enlace a los STl no funciona, y falta el video de la electrónica para este proyecto, me encetaría poder contar con toda la información completa para poder realizarlo, un abrazo y felicitaciones
Hi, I'd be interested in building the cutter to cut the bottle in tape, but I can't find the drawing of how to make the slotted bolt. Would it be possible to have the drawing? Thanks and regards
Hello, I have one problem. I connected all components correctly yesterday, all worked well. After using, I switched off. Today power on and screen become white and nothing work. What it may be? And how can I restore program and fix this problem?
Bro, I tried the pet filament machine you posted, but what should the filament size be? When I was trying to print? The filament was not moving down through the extruder motor. What do you think I should do? Please help me out. Bro. I cannot determine whether I should reduce the filament thickness or smaller the nozzle hole. Bro, help me, please Can you share your Instagram id? I will message you there or reply to hear your wish, bro
![BabyChiefDoit - Too Slow (feat. STAR BANDZ) [Official Music Video]](http://i.ytimg.com/vi/zayaxws7RPg/mqdefault.jpg)
I saw your design a few weeks ago and started to make it. Would love a video on your circuit board design and programming. Really cool idea, and it looks awesome!
Did you? The link he shared to download the files is no good anymore. Do you happen to know where I could get them?
@@AOqueso You can get it on printables however I am not sure what the circuit board he used for is.
Finally a project I have all the tools and materials to complete 😂❤❤
Yeah :)
Gracias por hacer estos archivos accesibles a todo público.. Greetings from Costa Rica..!!
EDIT: THIS IS PURE GOLD..!! AWESOME WORK..!!
Pudiste descargar los archivos STL?
@@_rubengauna no deja, alguien tiene de casualidad un backup ?
Thank you Man , RESPECT . I'm going to try these STL very soon because I think this idea IS the future .
En dónde están los stl?
@@victorroda8034 I agree, because if you click on the link it takes you to the printables site and then says it's part of the upcoming printer so there aren't any stls that i can see
this man deserve the world ❤❤
Excellent project. What I liked the most was the "wire box" under everything, making it more organized. About the display, is it adaptable for a LCD 16x2 screen?
Hello could you please please make a detailed video of electronics integration , list of components and pcb design/code
it would be very helpful for us
Hello everything is fine? Firstly, I would like to congratulate you on the project. Projects like this can make a difference by helping people recycle plastic. I'm having trouble finding the 400 V 10uF capacitor. Could I replace it with another one? If so which one?
You should sell this as a type of hobby build kit, I would buy it
Me too
Any chance you could make kits for these? Because someone DEFINITELY SHOULD! These could change so many things for the better!
I have built one similar but your cutter and spool are best. Maybe I make one of yours machine! Congrats
I would really love to build this, but the STL files are not available on printables and I know nothing about the electronics. Do you have a complete files and start to finish instructions with circuit boards, controls and all?
If there is then i would love to have then too as i would love to make my own as the cost is high for me
The STL Files link does not work, it is dead. Can you send another link to the files? Could you also add the extruder protector file, please?
I find it here. It's on other link.
@@carlosramos680 where? Send me
@@carlosramos680 where
You should read the PDF before requesting an STL file.
Can I please have the building plan and the part list 😊❤
Te veo desde PERU me encantaría tener todas las herramientas necesarias para poder desarrollar este proyecto. muchas gracias po
r el video
Gostei muito do seu trabalho, simplesmente incrível. estou tentando reproduzir em minha casa. você poderia por favor, listar a descrição dos modelos dos eletrônicos que você usou nesse projeto ? qual paca controladora e qual motor usou ?
Hi there. Looks like a much more elegant design than the machine I designed. One question tho. How thick is your strip that you get from bottles? My cutter makes the 8mm strips but it results in a larger hole inside the filament that I would like (I compensate with increased flow) but most importantly, I cannot splice it because it unwinds when heated to melt.
I go for 9mm for Coke bottles
Nicely work 🎉 good hand make home ❤
Where can I buy the parts to make one so I can recycle my bottles
Very cool, muy guapo el diseño 🎉🎉🎉
Great work, Could you please provide me with the Arduino code?
Hi. I want to ask only. What with an electricity consumption? You must pay eletricity for heat gun, compressor and machine. Its still cheaper to make own filament as buy it? On another side, there is no PET filament in shop and then its not so much waste from bottles.
Does it allow a neat spooling without overlapping the filament on the wheel without assistance? Doesn’t show the purpose of the sliding table
when u make the filament for 3d print, its that a PETG filament???
That is so clever.
Excelente proyecto, pero el enlace a los STl no funciona, y falta el video de la electrónica para este proyecto, me encetaría poder contar con toda la información completa para poder realizarlo, un abrazo y felicitaciones
Отличная работа.
Can I use this Machíne with my bambú lab mini
Your STLs don't seem to be available any more :(
Respect wallahi ya man 🫡🔥
Hi, I'd be interested in building the cutter to cut the bottle in tape, but I can't find the drawing of how to make the slotted bolt. Would it be possible to have the drawing? Thanks and regards
Hello! I would like to build this on my own, but I couldn't find the PCB diagrams. Do you have a link to download the files? I would be gratefull!
Where are the STL files and list of components etc cheers
which diameter of nozzle are you using? and how much in diameter the plastic which came out from nozzle?
Hello, thank you for the video. STL files link is not working, can you help?
Archivos stl no estan, ni en el pdf ni en la descripción del video, ni en ningun lado.
Could you please share the model of the plastic strip winder on 14:45
i was do it but the motor can not start correctly.
Hello. Does the rails really work as expected?
Hello. Greate job friend! Can you share hex (lno) file plz
hola como puedo montar una maquina similar, algun sitio donde encontrar los stl??, gracias un saludo
My dude you really need to make a complete guide step by step to make this, yt has marked some videos as "kid video" and the stl links are down.
stls missing
Hello, I have one problem. I connected all components correctly yesterday, all worked well. After using, I switched off. Today power on and screen become white and nothing work. What it may be? And how can I restore program and fix this problem?
I think the files are gone by now in the page, can you update the link please?
is there a BOM?
and gerbers for the PCB?
😊😊😊😊😊
any recommendations nn where to find a heated head? i cannot find one that says what voltage it takes :(
Dear the driver motor it hote. After run 1minute and stop work
nice
Hola los archivos STL no se pueden descargar desde printables
What is the type of useing
components
why is the website deleted? 🙁
A+
hola donde puedo encontar los stl para el diseño estaria interesado en montar una maquina similar, gracias un saludo
Hi bro, he deleted the website with the stls but i downloaded them before, so i can send them to you if you want
@@pavletrnic1433 hello please you can send me stl files? gracias desde Argentina
@@pavletrnic1433 I would also be interested
Please share electronic products link
the link to printables is dead, please, update, Thanks
Hello, the link to the printables is not open.
wow
What is the cut bolt for?
i'm having problems in pultruding my PET bottles, it's not smooth when it comes out, what could be the problem
also what should be the width of the plastic strip
Plastic strip 8mm
try lowering the temperature
What is the width of strap?
How to make the circut pleas replay and how to make the electronics
If you know how a 3d printer works you should understand how this works
Nice, could you do one filament making machine for me??
I love how he just madena video and would not engage with his supporters. I will help you make one machine.
@@martinm9877i have one question, what Type of the limt Sensor should I use or what is the link for it
I would be greatfull if I get to know this 😅😂
Link dont work
Hola! El link no está funcionando. :(
YAY
stl files (page not found)
for what you use this screw ? 12:19
Es un tope para dar el ancho del corte en la botella.
hiii where is the stl? :(
Lo vendes?
alguien sabe algo acerca de la pcb?
Dude can I be ur friend?
Hi broder Haw much?
Manca i file 3d.stl
YOU CAN WRITE ME FOR STL
'promosm'
Bro, I tried the pet filament machine you posted, but what should the filament size be? When I was trying to print? The filament was not moving down through the extruder motor. What do you think I should do? Please help me out. Bro. I cannot determine whether I should reduce the filament thickness or smaller the nozzle hole. Bro, help me, please
Can you share your Instagram id? I will message you there or reply to hear your wish, bro
Nozzle hole 1,8mm and filament 8mm