Hola cómo estás? Quería preguntarte tengo un problema con la prusa i3 pro b a la hora de imprimir..quiere imprimir en la posición 0..cómo puedo hacer para cambiar en el medio de la cama
just joking. I like the looks of your printer with proper linear bearing blocks. I'm also the process of building a Prusa i3. I'm currently waiting on the printed parts from ebay.
Hello I just finished assembling a Geeetech acrylic Prusa I3 Pro & Pro B.Ho Problems with engines X - Z . Just do the Command House Z motors Turn on the contrary forcing the Movement Axis Z. THE SAME He does it with X , does not go to the limit switch . It strikes the opposite side has . I Have Some Examples Thanks good job
Ciao Claudio, ho riscontrato anche io lo stesso tuo problema, ossia in fase di reset, invece di andare verso il micro a sinistra va a destra fino a fine corsa e poi sforzandoci contro. Tu sei riuscito a risolvere il problema? Se possibile fammi sapere! grazie Filippo
I am pretty happy with my Geeetech i3 printer, I am sure that it's not the best printer. But I doubt you could get any better printer for the price :) Also, I recommend people to buy a 0.5 nozzle because it makes for a much faster printing experience, much less nozzle jams due to filament quality and the parts seems to be a bit more robust, I but a 0.3 nozzle to begin with and I regret doing so. I also have a short video about my Geeetech i3 Pro printer on my channel, its not the same as this one but it is somewhat similar.
I have found that the Ender 3 pro is a much better printer for the same sought of price, especially now that I have installed BTT E3 board and touch screen. BTT board is much easier to install BL touch and firmware. My Geeetech i3 pro board became corrupted whilst trying to install the firmware for the 3D Touch.
I am having a ton problems with my i3 X. the filament is extruding too slow for how fast the printer is going so it's just a clump sliding on the bed. I am mechanically inclined person and building this and updating the firmware ect has been a nightmare at the least and I still haven't been able to print a single small block. I have probably 48hours into this build and still nothing upset with this item
I'm new at this and sadly I couldn't get it to print correctly... could you please specify the setting/config on the computer ( i'm using repetier) for temperature (bed or nozle), infil, skirt and brim, etc...
+lukeshoot i will upload the user maunal soon on our website www.geeetech.com/unassembledgeeetech-prusa-i3-x-3d-printer-p-941.html please download it here then
somehow the y axis of mine can only move backwards fluently. you any idea why it cant move forward properly? moving forward the y axis only moves very little and it makes a loud noise
it's necessary the glass base (I think it is glass), over the aluminium surface to print? I'm doing some test with this printer and the filament take off after a few seconds, so I'm guessing maybe it's the problem?
+guillermop what is the filament you are printing with? PLA or ABS? and what is the bed temprature you set? if you are printing PLA , keep it at 65-70 degree centigrade, and if you are printing ABS, keep it at 90-100 degree centigrade. and also you need to check if you have leveled the printing platform especially the distance between the nozzle and the aluminium surface.
+geeetech BS.......if you don't use acetone slurry your ABS and even PLA prints will curl up before done. Even on the glass REGARDLESS OF TEMPERATURE. I'm so sick of reading these lies.
+geeetech Maybe he ment you did the calibration. There is the test cube 10x10x10mm, and after print you can check if the dimension are the same, if they not, you have to calibrate your 3D printer.
+geeetech What I mean is: you are not conducting very much of a test when you fail to report dimensional measurements of the resulting print. Is the printer printing accurately, or not? This is the entire purpose of the print!! Did the printer actually print the shape fed to it??? Please use a calipers and check every dimension!!!!
I just ordered one... I've noticed that some users use tape on the bed to keep the model in place when printing... Is that necessary? - (I noted that you didn't use tape on this demo...)
for all the firmware of geeetech 3d printers, you can find here www.geeetech.com/forum/viewtopic.php?f=20&t=17046 find the firmware corresponding to the model of your printer
hello I am using The same extruder as this one in this video. the geeetech mk8 extruder that I am having problem calibrating it in marlin. It uses a 11 mm gear. I use arduino mega 2560 with ramps 1.4 sb premium black edition and pololu stepsticks drivers a4988 the green ones. For the extruder my vref is 1 A I use for Z axis M6 Threaded rods that I configured in marlin with 3200. My Esteps in marlin are 185. Is that correct? my config.h in Marlin looks like this: 80 80 3200 185 300 300 3.3 25 1000 1000 10 10000 retract is 1000 and ejerk is 5.0 mm/ sec What Am I Missing? I can't do a good print with this extruder.pls help Another thing.I calibrated the esteps with the amount of filament going in and it doesn't move at vref 1 A. also at 1.2 A it moves but no filament comes out. when I go back to my previous esteps settings 185 its extrude more filament that is normal almoust double & whe I print it seems to miss plastic with holes and stuff.the infill is horrible. on my youtube channel you can see my printer and the extruder.there i manage to print something but with triple the amount of filament, almoust 450 esteps. 😢😢😢
Already I know these things , the only thing that is not clear , if a piece is broken , can I buy any verisone compatible from the internet , or you need to own that particular piece?
i3 b pro?? You mean this pro X? We use Marlin. all the firmware for our 3d printers can be found here www.geeetech.com/forum/viewtopic.php?f=20&t=17046
+geeetech hello, Can you explain the differences, I understand that as you mentioned there were made to satisfy various. needs. Which are those needs? thanks
+Alejandro Eilberg some of them are cheaper (made from acrylic), some have dual extrusion etc. I would in all cases choose the most stable material, metal.
Thanks for the video, but you know... most people looking for 3D printers demos are really after the end result (i.e.: hi-res pictures of what the actual *printed part* looks like). There's little point in showing the whole printing process. In other words, I came here to see what kind of print quality I might expect from this particular printer, should I decide to buy one. Sadly, this video missed the point IMHO.
may I offer my honest option of this printer, I purchased on in Feb of 2016- I must have gotten a LEMON, missing parts, bent rods as of today I have had it apart more than running- purchasing this was the BIGGEST mistake in my life, a friend purchased on and has no issues, so please beware. And perhaps 30 good prints as today.
Funny thing is i got one built it and still doesnt work its been a yr funny how these people make it look like "oh you just build it and power it on and start printing away" I wish it worked like that lol.
I bought one of this model by Dx. Very poor quality. Broken and missing parts, bended axels, broken brushings, aluminum bed seriously bended. Impossible make it work
Thanks for your feedback. The problem of your printer must be caused during shipping. If there is any quality problem, please contact the reselller. Together we will help you resolve it.
Same thing he, bended guid. They told me it's ok, it's withn specs... Finaly went to the shop for a DIY guide. By the way, the whole package box was ok, no damage. The guid has been placed into the package box broken!
What bothers me with this printer, is the way the power supply is attached. There is literally only a flimsy lid keeping you from touching the high-voltage terminals, which RIGHT ABOVE the power switch! I would suggest including a printed box, or simply a big cover for the power supply in the kit. Geeetech, this is extremely dangerous!
Seth Nuhn Sure you can print one yourself, but I doubt that a small cover would be that expensive to include from the beginning... Say, can you replace the bearings inside their housing? From what I've seen they are simply LM8UU bearings fitted inside a aluminium block, secured by a small metal ring you can pull out?
Presente a voi l'assistente elettronico per la creazione della sua prima stampante 3D Prusa i3 play.google.com/store/apps/details?id=nik_wanish.a3d_printer_i3&hl=ru.Огромное~~number=plural grazie al video autore !!!
2 failed motors, a failed motor control chip. and an extruder that wouldn't heat up... No support from amazon, no support from Geetech. Sent back for a full refund. got an Ender 3 instead... same price. far superior quality all round.
Probably the best printer for its price
I mean 3D printer!
+Christian Ingmar Kjølsvik lol yes, you are right
+Christian Ingmar Kjølsvik This actually helps, thinking of buying one
+Kalaminator thanks for your criticism. i will take care of that.
Hola cómo estás? Quería preguntarte tengo un problema con la prusa i3 pro b a la hora de imprimir..quiere imprimir en la posición 0..cómo puedo hacer para cambiar en el medio de la cama
just joking. I like the looks of your printer with proper linear bearing blocks. I'm also the process of building a Prusa i3. I'm currently waiting on the printed parts from ebay.
buen vídeo, una consulta. cuanto es el alto que puede llegar a ser la figura? gracias!!
Use a feeler gage to level your bed, it works way better.
Is there a video that shows where the cables are gonna be attached to? The playlist of about 24 videos doesn't show it
please help. the up and down motors keep getting jammed and hum. it also goes down too far and the table it almost all the way please help.
Hello I just finished assembling a Geeetech acrylic Prusa I3
Pro & Pro B.Ho Problems with engines X - Z .
Just do the Command House Z motors Turn on the contrary forcing the Movement Axis Z.
THE SAME He does it with X , does not go to the limit switch . It strikes the opposite side has .
I Have Some Examples
Thanks good job
Ciao Claudio, ho riscontrato anche io lo stesso tuo problema, ossia in fase di reset, invece di andare verso il micro a sinistra va a destra fino a fine corsa e poi sforzandoci contro. Tu sei riuscito a risolvere il problema?
Se possibile fammi sapere!
grazie
Filippo
CIao anche io ho lo stesso problema sull'asse Z, Avete risolto in qualche modo?
Filippo Penna ciao ho risolto entrando nella configurazione di arduino e nella sezione dei motori o invertito il movimento del motore X
grazie Claudio, problema risolto!
buona giornata!
I am pretty happy with my Geeetech i3 printer, I am sure that it's not the best printer. But I doubt you could get any better printer for the price :) Also, I recommend people to buy a 0.5 nozzle because it makes for a much faster printing experience, much less nozzle jams due to filament quality and the parts seems to be a bit more robust, I but a 0.3 nozzle to begin with and I regret doing so. I also have a short video about my Geeetech i3 Pro printer on my channel, its not the same as this one but it is somewhat similar.
I have found that the Ender 3 pro is a much better printer for the same sought of price, especially now that I have installed BTT E3 board and touch screen. BTT board is much easier to install BL touch and firmware. My Geeetech i3 pro board became corrupted whilst trying to install the firmware for the 3D Touch.
Just when I got into the music, it cuts out. Other than that it's a decent demonstration video. Thanks.
+Seth Nuhn thanks!
I am having a ton problems with my i3 X. the filament is extruding too slow for how fast the printer is going so it's just a clump sliding on the bed. I am mechanically inclined person and building this and updating the firmware ect has been a nightmare at the least and I still haven't been able to print a single small block. I have probably 48hours into this build and still nothing upset with this item
+eddie sied please do not worry, it is not as terrible as you think, please contact our tech support, they will help you out.
eddie sied 13x
How low/down do you set the long screw on the left of the printer that pushes down on the Y limit switch?
where ever you want
I'm new at this and sadly I couldn't get it to print correctly... could you please specify the setting/config on the computer ( i'm using repetier) for temperature (bed or nozle), infil, skirt and brim, etc...
+lukeshoot i will upload the user maunal soon on our website www.geeetech.com/unassembledgeeetech-prusa-i3-x-3d-printer-p-941.html please download it here then
Why does that printer look nothing like the one i have. mine is held together with zip ties and hope!
yes where did those nine y axis rods come from?
I'm putting together one now and it's nowhere as shiny and my hands are black 🤔
can you show how to print directly through USB connection
What is the Music I want it please.
THank you
somehow the y axis of mine can only move backwards fluently. you any idea why it cant move forward properly? moving forward the y axis only moves very little and it makes a loud noise
same problem. any idea to solve this problem, layer on that axis shift a lot
it's necessary the glass base (I think it is glass), over the aluminium surface to print? I'm doing some test with this printer and the filament take off after a few seconds, so I'm guessing maybe it's the problem?
+guillermop what is the filament you are printing with? PLA or ABS? and what is the bed temprature you set? if you are printing PLA , keep it at 65-70 degree centigrade, and if you are printing ABS, keep it at 90-100 degree centigrade. and also you need to check if you have leveled the printing platform especially the distance between the nozzle and the aluminium surface.
+geeetech BS.......if you don't use acetone slurry your ABS and even PLA prints will curl up before done. Even on the glass REGARDLESS OF TEMPERATURE. I'm so sick of reading these lies.
Can anyone help me to set up the Prusa i3 M201 on a Mac?
Hi, I'm really interested in purchasing this printer, but I mostly print in alumide. Is this ok? Also, what about the noise level?
Yours looks good. I bought same Can I ask. Is it 200mm X 200mm bed by 180mm height. I can't calbriate spot on. Do u use the cura level bed ?
no, i do not use the cura level. if you need help, please contact our tech support to calibrate it.
When you say "test", how about some dimensional checks for accuracy? 0.1mm everywhere? Any errors?
Rich Altmaier
?
+geeetech Maybe he ment you did the calibration. There is the test cube 10x10x10mm, and after print you can check if the dimension are the same, if they not, you have to calibrate your 3D printer.
thanks for your explenation
+geeetech What I mean is: you are not conducting very much of a test when you fail to report dimensional measurements of the resulting print. Is the printer printing accurately, or not? This is the entire purpose of the print!! Did the printer actually print the shape fed to it???
Please use a calipers and check every dimension!!!!
I want to print flexible filament with this. Was wander if this is a direct drive extruder or a Bowden extruder?
you can print with flexible filament with this, it is direct drive extruder
whats the difference between this and prusa pro B and pro C? thanks!
the number of extruders, the design of the looks.
why this setup d music ?
whats the most standard nozzle to order when buying this? it prompted me to choose a size but I'm not sure which will be best?
+RalphDroid filament: 1.75mm nozzle: 0.4mm is the standard size
+RalphDroid .3mm nozzle is good, but it will take a long time to print large objects. For larger objects I use a .5mm nozzle
Is motion in 6:30 onwards realtime??
yes, you can adjust it anytime
I just ordered one...
I've noticed that some users use tape on the bed to keep the model in place when printing... Is that necessary? - (I noted that you didn't use tape on this demo...)
yeah, i did not use.
It is not necessary.
But you can use tape to protect the glass or the alunimum plate.
I ruined the firmware for my Geeetech Prusa i3 pro X, could you please send me the updated version for it?
for all the firmware of geeetech 3d printers, you can find here www.geeetech.com/forum/viewtopic.php?f=20&t=17046
find the firmware corresponding to the model of your printer
is there a chance I can get the marlin.ino file, or a screenshot of the configuration.h file? I have this exact printer and it's running like shit.
Angel Dearce Hi, you can ask for the seller, he or her will send you
+Angel Dearce Hi angel, please leave you e-mail(it won't be public), i will send you the firmware.
+geeetech Please send the firmware to me too.
+geeetech dearceangel@gmail.com
Lauri Läärä Please leave your e-mail address.
hello
I am using The same extruder as this one in this video.
the geeetech mk8 extruder that I am having problem calibrating it in marlin.
It uses a 11 mm gear.
I use arduino mega 2560 with ramps 1.4 sb premium black edition and pololu stepsticks drivers a4988 the green ones.
For the extruder my vref is 1 A
I use for Z axis M6 Threaded rods that I configured in marlin with 3200.
My Esteps in marlin are 185.
Is that correct?
my config.h in Marlin looks like this:
80 80 3200 185
300 300 3.3 25
1000 1000 10 10000
retract is 1000
and ejerk is 5.0 mm/ sec
What Am I Missing?
I can't do a good print with this extruder.pls help
Another thing.I calibrated the esteps with the amount of filament going in and it doesn't move at vref 1 A.
also at 1.2 A it moves but no filament comes out.
when I go back to my previous esteps settings 185 its extrude more filament that is normal almoust double & whe I print it seems to miss plastic with holes and stuff.the infill is horrible.
on my youtube channel you can see my printer and the extruder.there i manage to print something but with triple the amount of filament, almoust 450 esteps.
😢😢😢
+3DIY Original you can post this on our forum and talk with our tech guys. they can give you a better answer :) www.geeetech.com/forum
hi what kind of plastic are you using in the video. ABS, PLA???
Pla
whats the thinnest filament i can use on it to better quality?
+Zeeeeeechan you can use a 0.3mm nozzle
I want to buy it, it's a colone of reprap, but all componets are compatible ?
yes, it is a reprap type. You can check more details here www.geeetech.com/unassembledgeeetech-prusa-i3-x-3d-printer-p-941.html
Already I know these things , the only thing that is not clear , if a piece is broken , can I buy any verisone compatible from the internet , or you need to own that particular piece?
www.ebay.it/itm/Ship-from-DE-Prusa-Acrylic-I3-stampante-3D-Printer-support-5-filament-MK8-DIY-/282001678547?hash=item41a89c20d3:g:-xoAAOSwuzRXfNIm
this is another model the pro B
But it's is good?
bought one of them after 1st print the printer doenst read any kind of SD cards -.-
Please contact with our technician at technical@geeetech.com
music?
what is the glass dimension for this printer?
Hello it is 210mm*200mm*3mm. If you need it, please find it here
www.geeetech.com/borosilicate-glass-p-660.html
Can I use the same settings with Pro B ?
+Mo ed i am afraid not, some parameters are different.
Where can I download the test_40x30x10_PLA file?
you can find it in the manual
Thanks for sharing, what 3d drawing software do you use?
aí sim
while you're at it, can you print me a rasta joint holder?
can you please give me the exact part number of it?
what's the firmware for i3 b pro
i3 b pro?? You mean this pro X? We use Marlin. all the firmware for our 3d printers can be found here www.geeetech.com/forum/viewtopic.php?f=20&t=17046
Which model is "the best" I3?
I see you have multiple:
- I3
- I3 Pro
- I3 Pro b
- I3 Pro c
- I3 X
It's a bit confusing...
+DIY_glenn each of them has their merits, we made them to satisfy various needs of our customers
+geeetech hello, Can you explain the differences, I understand that as you mentioned there were made to satisfy various. needs. Which are those needs? thanks
+Alejandro Eilberg some of them are cheaper (made from acrylic), some have dual extrusion etc. I would in all cases choose the most stable material, metal.
+DIY_glenn The I3 Pro c is the best, two extruders are great!!
26/5000
I do not have Print from.sd ?
Hi Dominique, our technician Rick will help you at technical@geeetech.com and you can send videos or pictures to him.
only use 8mb or less sd card
lease visit here ....?
？
interessting price. 270 bucks isnt much.
Ebay 140 Euros
:)
got the much better anet a8 for 130€ on gearbest few months ago.
The A8 is only alive thanks to the giant community, after buying the A8 I would recommend you to buy extra parts for your saftey!
Thanks for the video, but you know... most people looking for 3D printers demos are really after the end result (i.e.: hi-res pictures of what the actual *printed part* looks like). There's little point in showing the whole printing process.
In other words, I came here to see what kind of print quality I might expect from this particular printer, should I decide to buy one. Sadly, this video missed the point IMHO.
look at the head around 3.00
Ed 8â......,😬😬😉🐚🍨🍙🍡
may I offer my honest option of this printer, I purchased on in Feb of 2016- I must have gotten a LEMON, missing parts, bent rods as of today I have had it apart more than running- purchasing this was the BIGGEST mistake in my life, a friend purchased on and has no issues, so please beware. And perhaps 30 good prints as today.
where did you buy it? Have you contacted the after sale service?
@@geeetech3dprinting mee too, benden guides.
Funny thing is i got one built it and still doesnt work its been a yr
funny how these people make it look like "oh you just build it and power it on and start printing away" I wish it worked like that lol.
Me too! Got the dripping nozzle isue! Done many things but still not ok. Do not by this 3D-
printer!
I bought one of this model by Dx. Very poor quality. Broken and missing parts, bended axels, broken brushings, aluminum bed seriously bended. Impossible make it work
Thanks for your feedback. The problem of your printer must be caused during shipping. If there is any quality problem, please contact the reselller. Together we will help you resolve it.
Same thing he, bended guid. They told me it's ok, it's withn specs... Finaly went to the shop for a DIY guide. By the way, the whole package box was ok, no damage. The guid has been placed into the package box broken!
What bothers me with this printer, is the way the power supply is attached. There is literally only a flimsy lid keeping you from touching the high-voltage terminals, which RIGHT ABOVE the power switch!
I would suggest including a printed box, or simply a big cover for the power supply in the kit.
Geeetech, this is extremely dangerous!
+xXYannuschXx For the price it's a great printer. If it bothers you, I'm sure you can print your own protective cover. ;-)
Seth Nuhn
Sure you can print one yourself, but I doubt that a small cover would be that expensive to include from the beginning...
Say, can you replace the bearings inside their housing? From what I've seen they are simply LM8UU bearings fitted inside a aluminium block, secured by a small metal ring you can pull out?
xXYannuschXx lol not even, it's extremely common for power supplies to be made in this manner. Not usually an issue for anyone.
A nearly uncovered 230v terminal, centimeters away from the power switch isn't dangerous?
i@@xXYannuschXx i have one. its not actually flimsy. the only problem is Z leveling.
Cool video😊subbed😎😎
+3DIY Original thanks
Presente a voi l'assistente elettronico per la creazione della sua prima stampante 3D Prusa i3 play.google.com/store/apps/details?id=nik_wanish.a3d_printer_i3&hl=ru.Огромное~~number=plural grazie al video autore !!!
Just save you money for an actual prusa
2 failed motors, a failed motor control chip. and an extruder that wouldn't heat up... No support from amazon, no support from Geetech. Sent back for a full refund. got an Ender 3 instead... same price. far superior quality all round.
You can buy this printer and found many accesories here: www.banggood.com/Wholesale-3D-Printer-and-Supplies-c-3533.html?p=KF11041475362201504C
this is not what you are selling. this whole video is a con.
no zoom, less focus, i dislike