Just did the same thing this year. I used the winch to put it upright. Had it half way twice and couldn’t flip it. Been ridding for years and never flipped. First time. Most likely not the last.
What it does is not leak and fall apart like the stock diff did...I've run mine now for more than two years issue free. The stock diff gave me problems from day one!
Years ago something similar happened to me. Spring thaw/freeze created a block of ice in the middle of the road. The Toyota FJ violently wrench the steering wheel from my hands. Luckily I was only doing 5 or so mph and was able to recover, but that sheit can happen without any warning and become quite the disaster.
That could only happen to you when you're riding alone!!! Lol!!! Glad you're not hurt and no damage to the machine. I just ordered a cv tech clutch last week!!! Can't wait to install it when it arrives!!!
Very scary when you're by yourself and something like that takes place. Glad to see you came out of that unscaved. Question round about price how much was that rear diff I am soon to be in need of one.
GEEZUS ROB, be more careful when you're by yourself! Sheesh! You're gonna give us all heart attacks! lol Looks like your front bush guard is over a little to the right. (based on the view from your camera) Nice mods! Thanx for sharin'!
Hey Q! Ya, I didn't even have my cell phone or anything with me, was supposed to be just a simple test ride! LOL! I think the bumper was bent in from when I hit a tree before! Thanks for watching Q!
yea but still rob ..on icy lake or road condtion .. i been on it with atv or atc and snowmobile .. i almost roll over 1 time but thank god iits ok but i did roll over on snowmobile and kawasaki bayou 185 and i was hurt on my shoulder but now after all that i still becareful not to drive to fast on icy condition and now pass 20 years ..i m doing great .. i don,t drive fast at all but its all fun about ..take care buddy drive safe
That’s a lot of nice mod’s you’ve done to that machine. You’re lucky you didn’t have 1000 LB setting on top of ya holy crap Batman! Glad to see you’re OK and the machine too. Thanks for sharing the test ride!
I might have gone overboard on the mods a wee bit! LOL! Still a few more coming up and then that's it...have to save my money for mods on the other toys! LOL! Ya, I don't think i'd like the feeling of 1000lbs sitting on me! LOL! Thanks for watching KC!
It was mounted by the original dealer, im assuming they used the mounting bracket that came with the heater...have never taken a close look to see how they actually mounted it.
Happened to me also but I was in a ditch. Luckily trees were growing in the ditch(it was agricultured fields around) and I could winch myself on the wheels.
Bloody hell Rob! I'd have been swearing like a Parot with Tourettes if I had done that. Thanks for sharing and remember either take a buddy next time and you're phone.
Wow good to see your ok i would have maybe cut a small pine pole use as leverage to try roll back over not much for options other than hook winch to tree try pull it side ways and use a pole .
I was eye balling the trees and a telephone pole and was going to which it up the snow bank and try and roll it back down but fortunately the 2 guys happened by at that point in time! Got lucky! Thanks for watching Man!
No, they are the open style...used to have the full wrap on my dirt bike and nearly broke my wrist on them a few times! I have the slip-on heat demons. Thanks for tuning in Man!
Glad your ok man!!! Couple things...zap strap your snorkels up high and low so they don't shake...save a potential leak. I bought a set of the aluminum Xmr bars from CanAm for like 65 bucks...waaaay stronger than those shitty steel out bars...I hit a tree and never bent my steering stem...first ride after replacing it too LOL! Lastly...I learned the same lesson you learned...leave the quad in the garage till all the ice and snow is gone! Hope to see you this summer!!!
LOL! Been such a long winter I had to get out! I have the snorkels screwed together at the top and a zip tie down low around the middle one to the front cowling, so it's not too bad now! Ya, I've been meaning to upgrades the bars sometime but spent way too much money this winter for my liking, so it will have to wait for awhile! Thank for the tips and tuning in!
Rob Farrow ATV I had my snorkels strapped and they vibrated like yours...then I had another tech do it and tjey are.part of the machine...zero shaking! Hope to meet up with you this summer. If you need a place to stay hit me up!
Thanks Man! Ya, still room for improvement on the snorkels! Still waiting on an ice report for the May Long ride...hopefully it's ice free and decent weather or I'll have to head south! LOL!
Tell me about it...2nd time I've rolled a quad on ice and snow and both times in 2 wheel drive...from now on it's 4x4 in the snow and ice! LOL! Thanks for commenting and tuning in Chris!
My GoPro I had to shim SD card in the slot for it to make solid connection. Mine would cut out all the time before shimming with a piece of paper. Sounds crazy but it worked for me.
Glad you’re ok.....and the machine as well...I’ve had that happen before..catch the tire and pull ya over....I had a plow attached to the front of my backhoe...going into a blind corner keeping to the right...caught the snow...into the ditch I went....I got lucky, the snow was so deep I just leaned over slowly....no broken glass...used the hoe arm to get out...changed my pants...kept going...lol...
It is a Double Take Mirror, bought it for my old Ktm years ago and it been thru hell and back...holds up to a lot of abuse and doesn't vibrate much! Uses the RAM mounting system! Thanks for checking the video out!
@@RobFarrowATV Been thinking, I wonder if it's possible to use the winch to lift the vehicle upright if you are alone. Providing there is a suitable anchor point of course.??
I was thinking about trying to winch off a telephone pole...maybe winch it onto the snowbank and then flip it back on it's wheels...fortunately someone came by before I had to do that. The tree line was too far to winch to.
How are you liking the CV Tech? People always tell me some clutches are just placebo effect hah. Loving the upgrades man! Glad your okay, that couldnt have been nice feeling :(
Best I can tell so far is that it's pulling really well, nice and smooth! I really haven't gotten a chance to really test it in the deep mud and skeg, as we're still waiting for the ice to melt off the swamp...it's getting there! Ya, it was a pretty crappy feeling to know you're going over and there's nothing you can do about it...heavy machine against Man! LOL! Thanks for checking the video out Man!
Rolled my new 850 down a hundred foot ravine walked away with a torn meniscus but a totaled machine only 16 miles on it glad you’re ok👍
Well that could've ended up a lot worse, sounds like you got off lucky. I hate hills! LOL! Thanks Kirk!
Just did the same thing this year. I used the winch to put it upright. Had it half way twice and couldn’t flip it. Been ridding for years and never flipped. First time. Most likely not the last.
LOL! If you ride hard, it's never the last time! LOL! Thanks for watching Man!
Does a mudnwheel diff gives more torque or at least does it give a noticeable riding experience ??
What it does is not leak and fall apart like the stock diff did...I've run mine now for more than two years issue free. The stock diff gave me problems from day one!
Lucky, that could have been worse. Glad your okay 👍
Ya, definitely could've been but fortunately wasn't! Thanks for tuning in John!
Glad it cranked back up. Looks like you were a long way out.
It did look like I was way out there but I was only about 4kms from home...I live way out there! LOL! Thanks for tuning in Randy!
Years ago something similar happened to me. Spring thaw/freeze created a block of ice in the middle of the road. The Toyota FJ violently wrench the steering wheel from my hands. Luckily I was only doing 5 or so mph and was able to recover, but that sheit can happen without any warning and become quite the disaster.
Wow, sounds like it could've been nasty! Yep, shit happens fast!
That could only happen to you when you're riding alone!!! Lol!!! Glad you're not hurt and no damage to the machine. I just ordered a cv tech clutch last week!!! Can't wait to install it when it arrives!!!
Yes, it usually does happen when I'm alone...and I'm not even screwing around either! LOL! Enjoy your CVTech Clutch! Happy Trails Mudman 68!
Very scary when you're by yourself and something like that takes place. Glad to see you came out of that unscaved. Question round about price how much was that rear diff I am soon to be in need of one.
GEEZUS ROB, be more careful when you're by yourself! Sheesh! You're gonna give us all heart attacks! lol
Looks like your front bush guard is over a little to the right. (based on the view from your camera)
Nice mods! Thanx for sharin'!
First two words out of my mouth as well, Hahaha. Gebus Rob. LOL
Eh TV LOL! All's good!
Hey Q! Ya, I didn't even have my cell phone or anything with me, was supposed to be just a simple test ride! LOL! I think the bumper was bent in from when I hit a tree before! Thanks for watching Q!
yea but still rob ..on icy lake or road condtion .. i been on it with atv or atc and snowmobile .. i almost roll over 1 time but thank god iits ok but i did roll over on snowmobile and kawasaki bayou 185 and i was hurt on my shoulder but now after all that i still becareful not to drive to fast on icy condition and now pass 20 years ..i m doing great .. i don,t drive fast at all but its all fun about ..take care buddy drive safe
What kind of bushing are you running my factory ones are shot
I switched out to the Garage Product bushings and have never had an issue since. ruclips.net/video/sunoTontGFQ/видео.html
That’s a lot of nice mod’s you’ve done to that machine. You’re lucky you didn’t have 1000 LB setting on top of ya holy crap Batman! Glad to see you’re OK and the machine too. Thanks for sharing the test ride!
I might have gone overboard on the mods a wee bit! LOL! Still a few more coming up and then that's it...have to save my money for mods on the other toys! LOL! Ya, I don't think i'd like the feeling of 1000lbs sitting on me! LOL! Thanks for watching KC!
What procedures did you do after the rollover was there any oil in your airbox
Oil in the air box drain...just drained it out and topped the oil back up. All was good!
What did you use to mount that heat demon controller onto your handlebars?? havng a hard time finding space on my XT
It was mounted by the original dealer, im assuming they used the mounting bracket that came with the heater...have never taken a close look to see how they actually mounted it.
Happened to me also but I was in a ditch. Luckily trees were growing in the ditch(it was agricultured fields around) and I could winch myself on the wheels.
Ya, I rolled my old Brute into a ditch once...it's in the opening credits of my video's! LOL! I got lucky also!
Bloody hell Rob! I'd have been swearing like a Parot with Tourettes if I had done that. Thanks for sharing and remember either take a buddy next time and you're phone.
Should have heard me swearing off camera, I'm sure someone did! LOL! Ya, I must remember the phone, even on a short ride! Thanks for watching Barry!
Would you suggest getting the cvtech? Got a guy wanting to sell his and I'm on the fence
The Dubya yes, very good upgrade! Bikes rip'n nicely with it! Good luck and thanks for watching!
Wow good to see your ok i would have maybe cut a small pine pole use as leverage to try roll back over not much for options other than hook winch to tree try pull it side ways and use a pole .
I was eye balling the trees and a telephone pole and was going to which it up the snow bank and try and roll it back down but fortunately the 2 guys happened by at that point in time! Got lucky! Thanks for watching Man!
What weights and spring are you running on the primary?
I believe I have 2005 weights in there with a shimmed 1017 spring if I remember correctly. Thanks for watching William!
Were those full wrap hand guards before? , I had to that to, so I could have the heat demons on at the same time as well !
No, they are the open style...used to have the full wrap on my dirt bike and nearly broke my wrist on them a few times! I have the slip-on heat demons. Thanks for tuning in Man!
Did you check if any oil overflowed into your air box?
Yep, had quite a bit in the clean drain line...almost full! It sat for quite a long time, so I knew it would! Thanks for watching Man!
How is that clutch working?
That clutch worked great from the time I installed it till the time I sold the 850.
Does your xmr 850 have a ticking noise coming from the engine it drives me nuts
LOL! Ya, I think they all do, like a ticking time bomb! LOL! Just get a really loud pipe and it goes away! ;-) Thanks for watching Kevin!
You need to adjust the head valve
How come your bike weighs 1000? Dry weight on my xt is 725.
The XMR has beefier axles and other options that add to the weight. She's a heavy beast!
@@RobFarrowATV my buddy has the same bike as me but max, weight is 1000lbs, I think you may be thinking of the max.
Glad your ok man!!!
Couple things...zap strap your snorkels up high and low so they don't shake...save a potential leak. I bought a set of the aluminum Xmr bars from CanAm for like 65 bucks...waaaay stronger than those shitty steel out bars...I hit a tree and never bent my steering stem...first ride after replacing it too LOL!
Lastly...I learned the same lesson you learned...leave the quad in the garage till all the ice and snow is gone! Hope to see you this summer!!!
LOL! Been such a long winter I had to get out! I have the snorkels screwed together at the top and a zip tie down low around the middle one to the front cowling, so it's not too bad now! Ya, I've been meaning to upgrades the bars sometime but spent way too much money this winter for my liking, so it will have to wait for awhile! Thank for the tips and tuning in!
Rob Farrow ATV I had my snorkels strapped and they vibrated like yours...then I had another tech do it and tjey are.part of the machine...zero shaking! Hope to meet up with you this summer. If you need a place to stay hit me up!
Thanks Man! Ya, still room for improvement on the snorkels! Still waiting on an ice report for the May Long ride...hopefully it's ice free and decent weather or I'll have to head south! LOL!
Rob Farrow ATV If you're coming to Prairie River SK my place is a good pit stop...i will have to go foresure then!!!
I'm hoping to get there, I have time booked so I'm going somewhere, just not a fan of ice...seen too much of it this year! LOL! Towing a 25' trailer!
Crazy stuff...yikes.
Icy roads, speed, and ATV’s don’t mix well!
Glad you are ok Rob.
Keep ‘er safe bud 👍
Tell me about it...2nd time I've rolled a quad on ice and snow and both times in 2 wheel drive...from now on it's 4x4 in the snow and ice! LOL! Thanks for commenting and tuning in Chris!
Roll overs can happen in a blink of an eye ... Had a few myself ... lol ....Glad your ok ....
Ya, it doesn't take much does it! As long as everyones fine, it makes for good video...if you have the damn camera on! LOL! Thanks for watching Allan!
SD card is crapping out, trust me that's the issue
Yes, I changed it and the Gopro seems to be working good now! Thanks Job and thanks for checking the video out!
My GoPro I had to shim SD card in the slot for it to make solid connection. Mine would cut out all the time before shimming with a piece of paper. Sounds crazy but it worked for me.
Interesting...Thanks Man!
Glad you’re ok.....and the machine as well...I’ve had that happen before..catch the tire and pull ya over....I had a plow attached to the front of my backhoe...going into a blind corner keeping to the right...caught the snow...into the ditch I went....I got lucky, the snow was so deep I just leaned over slowly....no broken glass...used the hoe arm to get out...changed my pants...kept going...lol...
Wow, that would be scary! I like to be thrown far away from any machine when it rolls! LOL! Thanks for tuning in Man!
What brand of mirror is that?
It is a Double Take Mirror, bought it for my old Ktm years ago and it been thru hell and back...holds up to a lot of abuse and doesn't vibrate much! Uses the RAM mounting system! Thanks for checking the video out!
Great view of the skid plates!!! Dang! I don't think that is the approved method of breaking in a new belt... ;)
They look great don't they! LOL! It's a good method for breaking something anyway! ;-) Thanks for tuning in Broknex!
Glad you didn’t get hurt man
Thanks Man! I think I got lucky on that one! Thanks for tuning in!
Rob Farrow ATV freaking tight give my channel a subscribe I got the same machine I will putting up some good content this year
well sh.t happens- glad your not injured bad...! - we had a summerlike april- look my vids if like rob
Ya, it does happen...to me! LOL! Thanks for tuning in!
Great looking machine.
Thanks Man! It looks better when on 4 wheels!! LOL! Thanks for checking the vid out Al H!
@@RobFarrowATV Been thinking, I wonder if it's possible to use the winch to lift the vehicle upright if you are alone. Providing there is a suitable anchor point of course.??
I was thinking about trying to winch off a telephone pole...maybe winch it onto the snowbank and then flip it back on it's wheels...fortunately someone came by before I had to do that. The tree line was too far to winch to.
@@RobFarrowATV Might be an idea for an instructional video. Glad your bike wasn't damaged though mate, that thing is a beauty.
Holy shit! Yep,always wanted to see a skid plate. Have I ever told you that your crazy? Pretty sure that I have.
LOL! Ya, I think you have! LOL! Thanks for tuning in!
How are you liking the CV Tech? People always tell me some clutches are just placebo effect hah. Loving the upgrades man! Glad your okay, that couldnt have been nice feeling :(
Best I can tell so far is that it's pulling really well, nice and smooth! I really haven't gotten a chance to really test it in the deep mud and skeg, as we're still waiting for the ice to melt off the swamp...it's getting there! Ya, it was a pretty crappy feeling to know you're going over and there's nothing you can do about it...heavy machine against Man! LOL! Thanks for checking the video out Man!
Just glad it wasnt damaged. I know exactly what those plastics are worth. lol
Dude, don't ride alone. This shit might get you real bad!
Get at least one another crazytard with you :D
LOL! Ya, learning some great lessons this year! LOL! Thanks for tuning in Man!
Hey first time watching your channel and subscribed. Where were you riding in this video?
Welcome Jim! This was just north of Thunder Bay Ontario on some backroads. Thanks for watching!
@@RobFarrowATV That's awesome. Thanks.
Wait what is this a 850 or a 1000
It's a Can Am Outlander XMR 850...
Good atv
Thanks Mike!
👍👍👍👍👍
Thanks Muhamet! Glad you enjoyed the vid, thanks for watching!
Drive it like you stole it .
Always do! ;-) Thanks for checking the video out!
Thats what you get for not recording XD. Im Kidding.
Ya, no kidding...thought I had it on! LOL! Thanks for watching TJ!
No Problem Dude
U need to pay more attention. That was unacceptable!!
LOL! Okay Clayton! Thanks for tuning in!
Try not driving on a road lol
Hahahahahaha
Na, I'll still roll no matter where I go! Thanks for tuning in!