DIY Kenmore Washing Machine Fix! Broken Timer…
HTML-код
- Опубликовано: 10 сен 2024
- A “how to” video on tear down, diagnose, and repair of a Kenmore washing machine timer.
f you enjoyed this video and would like to support the work of this channel please consider a donation to: The Mountain Craftsman @mattmustin
Is not about the money is the satisfaction that you get from fixing it, That was a great repair.
Excellent! helping my 90 year old dad get it worked out.
I am from Latinoamerica, the majority of the technician they do that. Because we don't have the money, like you guys have. But I am very happy for you bro. You DARE to help a lot of people.
Sir, I watched this 2 years ago; its priceless!! Want to Thank you for this information. When I took mine apart, all the guts went here and there; Had no plans of how to put it back till I remembered your video. Ended up having the I did have the same broken gear shaft but at very top. That dang spring clip gave me the business; finally after a day of thinking.; got it back together. Works good for now. I truly thank you much for this. aaron in Richland Hills, TX
@@aarondrumgo7785 thank you! I love reading comments on how this video has been helpful! Pretty cool!
Tested the motor, capacitor and Fill sensor. Was almost ready to send my 1996 Kenmore away. But nope ... it was the timer and this was the video that showed me what to look for. She survives to wash another load. Good thing too ... I was running low on clean socks. Thanks Matt.
Bro! You are a badass. I know this seems simple to you. I take soooo much pride in fixing things that's why I started a handyman business. I really thought you were going to say you didn't have a fix to the broken shaft. The wire fix was great. And I really like the part when you drilled inspection holes to watch the gears in action to see which one was not working. Great video. I believe if people would work on something till the very end they can fix 90% of things that are broken.
Dude this tutorial was sick! I've been learning how to do diy appliance repair for all the wrong reasons for the last couple years, and I've watched a thousand of these things. You sir are a real one, and these other repair guys could use some notes from you on creativity and critical thinking. True DIY: a little figuring, a little fabricating, and a little fixing. One of those steps goes wrong that just means you didn't spend enough time on the first step LOL. That pin idea was genius. Fortune favors the bold my friend. Keep on fixin. 🤘
Thanks, Matt for the effort and diligence to make this video. As a long-time laundry tech for Sears, I replaced a lot of these cheap plastic timers used in newer top load washers. They don't tend to last nearly as long as the older metal timers did. Sadly in an effort to save money, the newer machines engineers cut some corners which led to disposable appliances. My Whirlpool washer/dryer is 31 years old and may last another 10 years without abuse.
I just want to say again thank you so much for this video you've helped me out I'm a poor person I can't afford to run out and pay big money or something like that thank you so much for this video thank you for looking out for the people that's having it hard and you know yourself everybody's having a hard this time if you got any more videos tips for cruise on how to do it yourself at home please share and thank you so much for taking the time to share this video it's helped me out a bunch thank you so very very much for your time and work.Now that was ten years ago when I was charging $25 an hour but not counting what he charged for the parts to fix my washer with So yeah thank you for this video you did save me some money thank you so much I appreciate it and yes please put up more videos please share with us ...
Matt this is an amazing video rarely available on line. Repair and explanation of timer operation very well explained. This information is very much appreciated.
Thank you!
You just saved me $500 bucks! Awesome video!!! Easy fix!!!
I had just replaced the dogs when the washer stalled on the first rinse/spin cycle. Totally unrelated problems it would seem. Lid switch bypassed a decade ago. Put power to the timer motor and it spun fine and turned the player piano bumps so that part is good. I'm about ready to file the points and put it back in. Thanks for the video! :-)
Perfect description left nothing out!!
Thanks for this detailed video. Got timer issues with my 80 series and a new one costs more than double what I paid for the washer! Gonna try to clean up my timer. Thanks for the break down
Yeah the 600 series ones are exactly the same. They are like $200 now. The washer itself though is 10x better than the junk they sell now though. New washers wont last as long as the old switch in mine did. lol
On my 80 series the points were burned from arcing and the timer needed to be replaced. Now $191 plus tax.
Thanks! It’s so helpful to see what’s inside the device before I take it apart. Was trying to decide whether to buy a new timer but I will hold off now.
The timer in my frigidaire washer broke in the exact same spot! Thanks so much for posting this. Will hopefully come back with good news.
Thank you! I was able to get mine working again. The only thing I did differently was using a screw through the hole I made. It prevented some slop, which was the only way to get that spring that pops off to stay in place for me. TO ANYONE ATTEMPTING THIS REPAIR, TAKE NOTE OF HOW THE SPRING IS ATTACHED BEFORE DOING ANYTHING ELSE, TAKE PICTURES. It took me forever to figure out, but it was worth my time. The timer is a $200 or so part. The washer isn't even worth that, but it's wasteful to throw out an entire washer because of a tiny broken shaft.
That spring…. Ugh. x2 on taking a pic first
@@bobbGSP Did you figure out where it goes? I have a spare sitting here that I could photograph.
Epic my friend 🤣. You help me allot to fix the washer machine that my mom gifted to me. Thank you very much.
Exact same issue with my timer. Excellent Video. Thank you.
Awesome video. This timer looks to be identical to the one on my old whirlpool! I knew it was something small
This is such a great video! I’m about to take mine apart now.
Very informative video. Great engineering. I think I have a bad timer on a washer I have. Your video has inspired me to want to dig into it and give fixing it a try. Thank you Matt.
Thanks Matt for the video, help a lot to repair my timer of washing machine.
I just wanted to thank you very much that was very educational crystal clear skills
Your patience and knowledge are amazing. I thought maybe I could do this procedure myself, but your skill is so far over my head. Geez. I might be able to clean the points, but that gear thing was WOWZA! I'll keep posted on how far I get. UPDATE: Wow, my timer looks very different, I guess because my washer is 22 year old. No apparent way to access the points. DEADEND (sob) New part = $189.69 = OUCH
Check on EBAY
My timer gets stuck between cycles and can be restarted manually but your video is steering me in right direction. Thanks.
That sounds like burnt points. Maybe check with a meter.
Great video man. MacGyver of job
Great vid, I’ll be doing this today, I’ll keep you updated!
Good video on timer repair. I’ve repaired broken cams on others.
i hope you stick with your channel. good job man
Thank you so much!
Cool dude I’m gonna give it a try. Because mine has the same symptoms
Thank you very much for this video...that's the same issue that I have with mine
Good job buddy..thanks
Matt, The information is so helpful. Thank you for this video!
man got to do what he has to do. thanks nice job
Thanks so much for the video!! Such diligence and patience in assessing and repairing your timer. Our Kenmore 80 series is so precious to me. We have replaced the clutch, leaky gear case, and I cleaned and painted the outside of the tub with appliance paint last year and it’s holding up super well. Having an issue right now where the washer spins fine after the wash cycle but will only drain but not spin after the rinse cycle until I turn the knob all the way around again and put on the final spin and it does the job. So it surely must be the timer. I will take it apart and see what I can figure out. I wouldn’t trade this K80S for a whole slew of the new, cheaply made/disposable machines. Many of the “not spinning” videos, though helpful, are in regards to the lid switch, clutch, or other issues and I was looking for one specifically that addressed the timer-spin problem. Thanks again for taking the time to make this video. Much appreciated.
I have the Kenmore 80 series also and will be doing point cleaning. Mine is getting one click after Rinse, then drains and spins one time, then it adds a little water and moves to off leaving water in bottom.
Thank you so much Sir, your video is very helpful.
Great video thanks for the help. My washing machine works again thats to you
Absolutely awesome tutorial man. I like to fix my own stuff when I can and I hate getting whooped. I went and watched another video showing how to clean the contact points. There were a few contacts that were charred up and I used a nail file, then put it all back together and it didn't help at all. I had to replace the motor coupling and that was cheap and easy to do but I saw the timer priced at 274.00 !! Heck I can get a another washer for that price. That's just obnoxiously too much. Then I saw your video about the gears and you gave me another plan of attack to try. I will pay attention to that white gear and see if it's bad on mine. Thanks for sharing your experience.
Appreciate the video,
I had the same problem.
Nice work on it, I would’ve definitely just ordered one but this work you did was amazing.
Nice clever repair. Thanks for uploading.
Best video it’s gonna help me out a lot with my corear thank you 🙏
Love your can do attitude, subscribed.
GOOD JOB !!!! YOUR AWSOME, SMART AND COOL !!!!! OH YEA & VERRY HELPFUL
Incredible!
My washer is not agitating during the wash cycle, but does agitate during the rinse cycle, so I'm guessing my problem is one of the switches in the timer. Thanks for showing me what I'm likely to find when I tear mine apart...tomorrow.
Thank you👍
You figured out to pull the timer off lol by lifting the tab 😂😂😂😂
@@carmac1652 yes! Thanks for watching!
Thanks 👍
Thank you so much for this video I’m going to use this over the weekend on my washer. Question how and what did you use for the pen I only saw it coming out of the white piece? Also I believe mine is a timer as well because it will stop when it fills and then when I push it to spin or rinse then it will spin and resume so hopefully it is a timer again thank you so much
Well done!
My washer is identical to yours, so this video is so helpful. At the end when you show the washer running, i noticed your washer wasn't spinning during the "drain" phase of the spin cycle. My washer is doing this too. It used to start spinning at the same time it starts draining. I was told the issue may be the timer, which is how i came across this video. My washer works fine otherwise (it finally starts spinning after a couple minutes when the motor pauses and then restarts). Any insight on that? I hope that all makes sense 😅
My initial thought on that is the spin cycle shouldn’t start until the drum is pumped down and as empty as possible. There should be a delay otherwise it’ll start spinning with too much water in drum straining motor and transmission.
I found burnt contacts looks like on the ones that have something to do with the motor. If i am readibg the schematic correctly. Is there a test just for the motor?
Great video man! Super informative. Im thinking the timer is the issue on my washer. My problem is that when i start my Kenmore 800 washer it starts to agitate before it begins to fill with water and then at the end of the final spin cycle it starts ti fill with water again. So I'm guessing the cycles are all screwed up. Any advice? Thanks!
Thank you
Good job... I would have used JB weld in your position.
Matt, attempting the same fix, the spring came off mine too and I can’t figure out how it’s supposed to attach, if you remember the correct positioning please let me know!
Oh man, that spring is so tricky! I remember it took me a couple tries to get it right but I couldn’t tell you how I did it!
This spring is pissin me off
Great vid, Good job
Amazing video
You’re f*cken awesome man!! Thank you for the video!
Smart guy. Thanks.
My washer filled with water, then stopped working. I can hear a "buzz" when I pull the knob out so I assume its getting power.....any suggestions....(Wish my timer was this simple)....
I’m not sure. Still possibly timer
Good job.
Hi I wonder you could help me on my west point washing mechine front loading timer is stuck .when started after very long time purchased as not had a chance to use it until recently for the first time. I presume I need to change the motor belt took as its harden and damage at the contact of the motor. How can I fix on my own if possible if I send you the picture of it.Do you think if I spray the timer with an electrical contact spray will it help with the problem .?
Hi. Mine had exactly the same problem. Just wondering how you were able to put back the spring.
Nice work
Gone up to $228-$275 plus tax and shipping DIY
APPRECIATE. 👍
Everyone has had or have that problem! Omg! I do of course. These kind of errors are called “planned obsolescence”… yes it’s a thing! 😩🤦🏽♂️
Awesome, Bro!
Does the timer smell hot when not working.
Any chance you could try to explain exactly how that little spring went cause I'm getting ready to throw this thing lol jk can't throw it or I won't have a washer lol
Gosh, it’s been too long! Don’t give up though. It’s worth having patience cause I haven’t had to do anything to mine since this video!
Man, great video. However, how in the name of Zeus's Butt Hole did you get that tiny little spring back on? I popped mine off but have zero idea how it goes back on.
Yes the same
Hi Matt, and thank you ...trying to repair my timer in France on an American made Whirlpool...it doesn't start and I found a miniature black piece that was perhaps of the small plastic black crossbar that is inside of the timer. After cleaning the contacts I will try to open the back as you did. The starter is not engaging, so the machine doesn't turn on. Any suggestions? Thanks again!
If the timer is turning but not starting it’s either points or motor capacitor
@@mattmustin1860 When I pull out the knob to trigger the water flowing into the bin, there's nothing...no power problems. Couldn't find the part, by the way -- they don't make it any more. Thanks.
If the points are burned from arcing you probably can't fix it.
Can any topload timer work
Thanks for the info......is that oj knife? 😂
Awesome video! My timer had the exact same broken shaft. You don't happen to have a picture of how that spring attaches to the dogs do you?
No I sure don’t. Sorry
@@mattmustin1860 I ended up figuring it out, and it's running great now. Thanks again for the video!
Nice
how long would you say the contacts last after filing them?
It’s still going strong. Depends on how badly burnt they are. Usually they are coated in silver. Once that is gone they won’t last long.
@@mattmustin1860 awesome I have the same exact same washer
I should send my timer to cause we have the Same washing machine and i cell have so much laundry 🧺 I need my machine back I replaced the door latch cleaned the reservoir bowel out cleaned the pump I dusted it and I really need help and I don’t wanna break my timer no more theny it maybe I’m not good like you