Replacement of throttle gaskets and intake manifold Renault Megane Clio Laguna1.4,1.6,1.8, 2.0 16v

Поделиться
HTML-код
  • Опубликовано: 27 авг 2024
  • Hi
    Today I will show you how to replace the gaskets in the intake manifold and the throttle.
    The original gaskets turn plastic after many years and stop sealing.
    Consequently, the engine draws in left-hand air and the revs are swayed.
    Therefore, it is worth replacing them. The total cost of these 7 original gaskets is 25 euros.
    I invite you to watch. If you have any questions, feel free to ask them in the comments. I invite you to watch. Thanks.
    Engine running before replacing the gaskets- • Renault Megane I 1.4 1...

Комментарии • 22

  • @lewisk4425
    @lewisk4425  Год назад

    The second part is the replacement of the intake manifold
    ruclips.net/video/5HNUfQE790g/видео.html&ab_channel=LewisK

  • @JayMaverick
    @JayMaverick Год назад +2

    Excellent video. No bs music, no dumb introduction, just straight hard content. 🎉

  • @fatihayar365
    @fatihayar365 2 года назад +2

    Thank you very much 👏🏻

  • @fadiflihan6903
    @fadiflihan6903 2 года назад +1

    Thank you so much Where does the evaporated oil from the engine go?

  • @any1youknow
    @any1youknow 7 месяцев назад

    Great video ty so much

  • @savasaltindal6299
    @savasaltindal6299 6 месяцев назад

    Video is perfect. What is the screw sizes ?

  • @joesaric1
    @joesaric1 3 года назад +2

    Is this complicated job or not so ? My car have problems that it cant hold the rpm and want to turn off when motor working in neutral position gearbox. What it could be wrong ?

  • @perish1n
    @perish1n Год назад

    Could I replace the Pressure Cap thats visible after you remove Intake , without removing other stuff?

  • @rachrach9ramdi455
    @rachrach9ramdi455 3 года назад

    Bonjour, j'ai un problème avec ma voiture Clio 1.4 16v, pouvez-vous m'aider?

  • @agustinmagnasco5976
    @agustinmagnasco5976 Год назад +1

    What was the fluid you applied on the gaskets prior to installation?

    • @lewisk4425
      @lewisk4425  Год назад +2

      engine oil

    • @ParFektion
      @ParFektion 3 месяца назад

      ​@@lewisk4425 Silicon grease would be better yes?

  • @TheWuzyy
    @TheWuzyy 2 года назад

    Where is the pcv valve?

    • @lewisk4425
      @lewisk4425  2 года назад +2

      In petrol engines in megane I there is no pvc valve as such. There is an oil separator, which you can see 15:34

    • @TheWuzyy
      @TheWuzyy 2 года назад

      @@lewisk4425 thanks. Does your engine the same like this when it's warm? There is a positive pressure on idle. It's negative when i rev it up: ruclips.net/user/shortst5wR9hXAoTo?feature=share

  • @rachrach9ramdi455
    @rachrach9ramdi455 3 года назад

    slt cv

  • @adambota1834
    @adambota1834 10 месяцев назад

    oem number please

    • @lewisk4425
      @lewisk4425  10 месяцев назад

      which parts?

    • @adambota1834
      @adambota1834 10 месяцев назад

      ​@@lewisk4425
      rubber seal

  • @fadiflihan6903
    @fadiflihan6903 2 года назад

    Thank you so much Where does the evaporated oil from the engine go?