This video shows how to install a Glock 19 magazine extension on your stock magazine. Hope it was helpful. Here is where I got my extension - www.amazon.com...
**Read This if having Issues** Do Not put the factory spring base plate back in. The little post on it stops the spring from seating flush and keeps it up off the base by like 1/4 inch. This why you are only getting 1 or 2 extra rounds in there, or maybe zero extra if it slid down crooked when sliding the base on. Just trying to help anyone watching this recently.
Absolutely right! I could only fit 4 extra on my g17 and I had the base plate in so I saw your comment and took it out and it fits 5 extra perfectly thanks !
The black flat piece is not require. Also you need to order ghost extra power spring. The one come with it is weak and will fail to feed. Add loctite to the set screw.
bach nguyen someone that knows wtf is going on, finally. Why did he use the black spring plate from the old magazine? Also mine already had the pins in them but I didn’t get a Allen wrench. I have a ton of wrenches I’m sure I have right size is it really needed? I just pushed spring down with my thumb and slid the base pads on then pushed that pin down I don’t foresee a problem did you tighten yours? Also what kind of spring are you running and what is the benefit?
@@derekddurbin I don't use the spring plate from the old magay. The pin allen size depend where you buy it from. I have several different version. But you want to blue loctite so it won't back out. The spring I got is from ghost XP for Glock 17, you increasing 5 more rounds, so you need extra length spring to feed the last 5.
bach nguyen yeah I just fixed mine I wasn’t having a problem but I ordered some more a couple of weeks ago I ordered 2 Glock 43 magazines that was a whole new mag with a plus 3 base pad and I bought 2 Glock 17 base pads that are plus 6. 23 rounds in my G17 with a Surefire 300UB and an AAC Ti-rant 9mm with Heinie Straight 8!sights is a hell of a night stand gun. It’ll do until Taran Tactical Innovations is done with my Gen3 Glock 34 Combat Master package with a Trijicon Type 2 RMR. I can’t wait to get it I’m buying all kinds of TTI stuff lately it’s such a good company. But I took your advice backed the screws out and blue locktited them thanks for the tip man. Glad to see shooters instead of trolls online still. Be safe out there.
The small black piece from the original magazine was left out. The process in the video was like slight of hand. I left that part out assembled three in less than 20 minutes and got the +4 in each mag.
Ehhhh ok so in my experience after installing my eBay plus 4-5 when installing with the after market spring I couldn’t get all 18 rounds with one in the head in my g23 gen 5. So instead of using the aftermarket spring I used the stock Glock spring instead and it allowed me to get all 18 with one in the head. This also made it a lot smoother when it came to racking the slide. Also have to make sure you don’t use the stock Glock base plate like he did I’m sure by mistake. Trial and error.
have you had any trouble with the rounds feeding or anything with the mag ? im trying to do this with my g23 also but see sum ppl say you need to order a stronger spring etc
Some of these depending on the brand the extendos sometimes aren't supposed to use the bottom plate from the original magazine. They can get stuck or sideways when they go into the extension.
i feel like new springs need to be worked in a bit for it to be a smooth full mag fire. maybe the top plastic piece need to be used to the mag for a bit i feel to function better
Dont make a tutorial if you dont know what your doing. The OEM floor plate doesnt get used, and maybe if you loosened the set screw you could actually put the retention pin in properly. Which is ABSOLUTELY needed and not "optional".
I know I’m a little late but great video...... I used it to show a student how to change his and it worked perfectly.... thanks for sharing. Just sub’d.
Im sending mine back. It feeds every round except for the last one. Plus 4 in glock 19 mag. I assume plus 5 in glock 17 mag but if it doesn't feed correctly all the way through its no good for me.
did you do everything besides add the stock glock base plate ? i think he added his back on accidentally. if you did remove it try getting a stronger spring like for a g17 to be able to feed the last +4/+5 rounds
I forgot the plate. Should I take off the extension, add the plate, then put the extension back on? Or just leave as is without the plate? I have not shot with it yet so I don't know how it will feed without the plate.
Are you saying that when he puts the OEM insert back in with the extender that he is defeating the purpose of the extender? I would think that Max would have discovered this by now, when he loaded the mag, and if there was a problem, he'd reshoot the video doing it correctly if this was the case. Max, your thoughts here?
i ordered one in red and thought it would be that nice eloxal red like yours, but instead it came like tyrant tactical coyoté bronce wich looks more like a dirty brownish red....😂 it dont fit my red fowler industries trigger at all..... i just cant find a extension that matches the exact red because every manufacturer has their own shades of reds.....had to find out the hard way and tried a couple that i paid with my own hard earned money. either too dark or too light but never the right one😂 but this amazon extension is way off the charts...i might get it camo cerakoted next time i send inn some stuff...well see.
No. You can’t use it with the Glock factory 10 rounders. Those magazines are tapered on the inside. That’s how they limit the capacity. I found that out the hard way. Magazine extensions only work on the hi-cap mags by design.
SnD OverKillYT Because the 10 rounder is specifically designed to prohibit you from doing so. It’s tapered inside. The metal liner has a raised rib and the plastic also has a solid raised rib molded in the full length of the mag. The metal liner is not solid if you cut it it will fall apart. The plastic rib would be a bitch to grind/cut out.
Glock 17 mags (17 rounders) and Glock 19 mags (15 rounders) will not accept the same magazine extenders. The bottom on a g19 mag is cut at a different angle than the g17 mag. The different angle causes the extension to sit at a different angle (instead of straight/inline with the mag). Using an extension intended for a Glock 17 on a Glock 19 will cause the magazine to fail by causing the spring to bind. I hope that makes sense.
@@hectorhinojosa7973 depends on your budget but I know Taran Tactical has +5 extensions for the G19 for $35. And if you can hold off I know they typically have some good sales around Black Friday
Stephen Schumaker I got one cheap knockoffs ones off eBay for 10 bucks but they only fit the 17 mags perfectly ima look into the strike industries highly appreciate that
Here’s a clue. When you’re doing a demonstration video for people who don’t know how to do it, don’t fast forward through parts you don’t think are important.
Well he didn't even know how to put the lock pin in so I'm thinking he's kind of a hack. Doesn't see a reason to install it... Ok. Tried to put it in and had to stop and not mention to others how it is supposed to be installed. The set screw on the side there.
I was thinking the same thing. And in reading through the comments, several are pointing out that he should not have put the OEM insert into the new extender.
have a question, i bought two magazine extensions and when its fully loaded it have a sound when i shake it, like something loose its normal? Or i install it wrong? Glock 34 3 gen And its has of 70 shots two missfeed
@@monps6183 remove plate?? Squeeze gently on sides AND PULL OR USE A TABLE OR SOMETHING TO SLIDE It’s a pain. But once u understand how it goes on and off. It’s easy.
**Read This if having Issues** Do Not put the factory spring base plate back in. The little post on it stops the spring from seating flush and keeps it up off the base by like 1/4 inch. This why you are only getting 1 or 2 extra rounds in there, or maybe zero extra if it slid down crooked when sliding the base on. Just trying to help anyone watching this recently.
Thank you bro couldn't fit none in mine because of base plate took it out worked
@@_-_MILOSHIGHALLDAY_-_ Cool man. Glad that was helpful.
Absolutely right! I could only fit 4 extra on my g17 and I had the base plate in so I saw your comment and took it out and it fits 5 extra perfectly thanks !
Do you know where they sell replacement springs for the +4?
Can I use this for 10mm
The black flat piece is not require. Also you need to order ghost extra power spring. The one come with it is weak and will fail to feed. Add loctite to the set screw.
bach nguyen someone that knows wtf is going on, finally. Why did he use the black spring plate from the old magazine? Also mine already had the pins in them but I didn’t get a Allen wrench. I have a ton of wrenches I’m sure I have right size is it really needed? I just pushed spring down with my thumb and slid the base pads on then pushed that pin down I don’t foresee a problem did you tighten yours? Also what kind of spring are you running and what is the benefit?
@@derekddurbin I don't use the spring plate from the old magay.
The pin allen size depend where you buy it from. I have several different version. But you want to blue loctite so it won't back out.
The spring I got is from ghost XP for Glock 17, you increasing 5 more rounds, so you need extra length spring to feed the last 5.
bach nguyen yeah I just fixed mine I wasn’t having a problem but I ordered some more a couple of weeks ago I ordered 2 Glock 43 magazines that was a whole new mag with a plus 3 base pad and I bought 2 Glock 17 base pads that are plus 6. 23 rounds in my G17 with a Surefire 300UB and an AAC Ti-rant 9mm with Heinie Straight 8!sights is a hell of a night stand gun. It’ll do until Taran Tactical Innovations is done with my Gen3 Glock 34 Combat Master package with a Trijicon Type 2 RMR. I can’t wait to get it I’m buying all kinds of TTI stuff lately it’s such a good company. But I took your advice backed the screws out and blue locktited them thanks for the tip man. Glad to see shooters instead of trolls online still. Be safe out there.
Yup if buying this is a must to get the extra power spring got mines from brownells
The small black piece from the original magazine was left out. The process in the video was like slight of hand. I left that part out assembled three in less than 20 minutes and got the +4 in each mag.
Ehhhh ok so in my experience after installing my eBay plus 4-5 when installing with the after market spring I couldn’t get all 18 rounds with one in the head in my g23 gen 5. So instead of using the aftermarket spring I used the stock Glock spring instead and it allowed me to get all 18 with one in the head. This also made it a lot smoother when it came to racking the slide. Also have to make sure you don’t use the stock Glock base plate like he did I’m sure by mistake. Trial and error.
I’ve done the same thing
@@maxlahoda thanks for the vid bud, definitely helped me out with my install. 💪🏽
have you had any trouble with the rounds feeding or anything with the mag ? im trying to do this with my g23 also but see sum ppl say you need to order a stronger spring etc
I got one today and only got ONE extra round in the magazine lol, weird but it looks good
That’s strange
@@maxlahoda yeah real weird I don’t understand it but I think maybe just the spring needs broke in? Idk... regardless I got 1 more in there.
@@franklinfocus se thing happened to me, what I did was use a mag loader and press down with my palm a couple times. It will break in.
Some of these depending on the brand the extendos sometimes aren't supposed to use the bottom plate from the original magazine. They can get stuck or sideways when they go into the extension.
Same with my glock 23 40s&w only added +1
Dude, serious watch band!
i feel like new springs need to be worked in a bit for it to be a smooth full mag fire. maybe the top plastic piece need to be used to the mag for a bit i feel to function better
I can’t fit the new spring into the mag for some reason.
You may try using the old spring
Can you put the plus 5 on the 22 mag for the glock 23 ?
I believe so!
that’s gon look retarded mud don’t even do it. It looks best on the oem mag yo 23 comes wit
Dont make a tutorial if you dont know what your doing. The OEM floor plate doesnt get used, and maybe if you loosened the set screw you could actually put the retention pin in properly. Which is ABSOLUTELY needed and not "optional".
Thanks for the input boss.
I can’t get my spring to click into my feeder
Weird. I’m not sure why not
I know I’m a little late but great video...... I used it to show a student how to change his and it worked perfectly.... thanks for sharing. Just sub’d.
Thanks!
Im sending mine back. It feeds every round except for the last one. Plus 4 in glock 19 mag. I assume plus 5 in glock 17 mag but if it doesn't feed correctly all the way through its no good for me.
did you do everything besides add the stock glock base plate ? i think he added his back on accidentally. if you did remove it try getting a stronger spring like for a g17 to be able to feed the last +4/+5 rounds
Dont think itll come off. The spring and floor plate are sunk down into the extension
can i use this for my glock 37 45 gap
How can you take it off with spring preventing movement
Just hold it tight
I forgot the plate. Should I take off the extension, add the plate, then put the extension back on? Or just leave as is without the plate? I have not shot with it yet so I don't know how it will feed without the plate.
I think it should be fine without it. It should feed fine I would think
I’m pretty sure you are supposed to leave the plate off. It serves absolutely no purpose in the new configuration
Got mine in and +5. 1st time was +4 then took apart and reinserted and got +5 in my Glock 19 holds 20
That's crazy. Mine only fits 19. I can't get the last round to make it 20. Too tight.
If you put the base of the other magazine, you are not doing anything, you are not using the extension to add more capacity to the magazine
Are you saying that when he puts the OEM insert back in with the extender that he is defeating the purpose of the extender? I would think that Max would have discovered this by now, when he loaded the mag, and if there was a problem, he'd reshoot the video doing it correctly if this was the case.
Max, your thoughts here?
How's still holding ? Any malfunctions or is it 100% reliable? Please be 100% honest , thanks !.
Hasn’t given me any problems
Thanks bro.
My dude sounds so high
i ordered one in red and thought it would be that nice eloxal red like yours,
but instead it came like tyrant tactical coyoté bronce wich looks more like a dirty brownish red....😂
it dont fit my red fowler industries trigger at all.....
i just cant find a extension that matches the exact red because every manufacturer has their own shades of reds.....had to find out the hard way and tried a couple that i paid with my own hard earned money.
either too dark or too light but never the right one😂
but this amazon extension is way off the charts...i might get it camo cerakoted next time i send inn some stuff...well see.
Damn man I hate to hear that! Good luck
Mine only hold 19
The Amazon link dnt work if u don’t mind would u send the new link
I don’t think they sell them on Amazon anymore bc it’s a gun part
Thanks bro
I have one but the spring is basically too big gets stuck
Shave it down
@@nolaphil is there a video?
Mine fits 20 rds in the mag not sure of the brand
Then why did you even comment
@@glock1inthetop45 becuase i wanted too
@@donjuan7089 don’t . You can’t
Nice post! Can you tell me the name of that tool to remove the basepad and where to buy it pls. Thanks
It is a magazine tool on amazon
How do you remove the extension base plate??
Shows in the video
How is it performing as of today? Any issues ?
It’s still working good! No issues
Anyone have a link for these? The one in the description is invalid now
It might have been banned in amazon. Try eBay. Just type in “glock 19 mag extension
www.ebay.com/itm/265467381920?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=fkrtv-AuQy2&sssrc=2349624&ssuid=mu2pirzytf-&var=&widget_ver=artemis&media=COPY
Can you do the extension on a 17rnd mag?
Yes. It’s the same thing
@@maxlahoda since the 17 is a bit longer would u say it’ll stick out with the extension? From the frame
Yes a lot
I got a +2 pad mag extension from toni systems,i put the pad mag extension on without the insert lock plate or the metal shaped needle. Is that ok?
I believe it should be good!
@@maxlahoda shot 100 rounds worked fine
Hey so I got a glock 19 but ig it came with 1 10 round magazine it seems to be single stack mag can I use this?
I’m sure you can. Should be the same size. You can also order double stacks on eBay and on other sights.
No. You can’t use it with the Glock factory 10 rounders. Those magazines are tapered on the inside. That’s how they limit the capacity. I found that out the hard way.
Magazine extensions only work on the hi-cap mags by design.
@@jamesholmes922 so any 10rd you can’t put a msg extension on it ? Only “High Cap” like maybe a 12 rounder ? Why not 10?
SnD OverKillYT Because the 10 rounder is specifically designed to prohibit you from doing so. It’s tapered inside. The metal liner has a raised rib and the plastic also has a solid raised rib molded in the full length of the mag.
The metal liner is not solid if you cut it it will fall apart. The plastic rib would be a bitch to grind/cut out.
For some reason on kci mags 15 rounders the extensions look a bit crooked when Installed
Glock 17 mags (17 rounders) and Glock 19 mags (15 rounders) will not accept the same magazine extenders. The bottom on a g19 mag is cut at a different angle than the g17 mag. The different angle causes the extension to sit at a different angle (instead of straight/inline with the mag).
Using an extension intended for a Glock 17 on a Glock 19 will cause the magazine to fail by causing the spring to bind. I hope that makes sense.
Stephen Schumaker understood, know of any that will fit good without breaking the pocket?
@@hectorhinojosa7973 depends on your budget but I know Taran Tactical has +5 extensions for the G19 for $35. And if you can hold off I know they typically have some good sales around Black Friday
@@hectorhinojosa7973 or if you are open to polymer ones, strike industries has some for $16
Stephen Schumaker I got one cheap knockoffs ones off eBay for 10 bucks but they only fit the 17 mags perfectly ima look into the strike industries highly appreciate that
I love base plates but sometimes they make the mag a little less reliable I usually through some lube in during the install .
*throw?
I'm just trying to understand what you are saying. :-)
@@BPoweredLove no he through the lube in
bruh why cant i stick the spring to the orange thing😂
Get like a flathead and smash it down it should clip back into place
It doesn't fit the gen 5 follower also my rounds fall out the magazine once i load it
@@DietWoke23 ended it up doing it looks cool but dont do it that shit gone jam unless i did it wrong but still ima just stick to factory glock mag
@@shiestyjefee same here just gonna pick up some spare pmags
Yep one of mine is the same way. Im sending both of them back.
Thanks! Mines on now
I jus got mine today an I do not a get a extra four let alone one I have a Glock 22 did I do sum wrong
You get two extra with a G22 magazine as far as I can tell.
@@tomjones5418 I got +5 in my G17 +4 in my G22
The follower don't jus "pop back in" and you moving mad fast to be tryna show ppl how to do sum
This work for Glock 20 10mm ?
I believe so
Mine needs a new spring
Do these fit on the 10 rd mags? Or are they generation specific at all?
I think it’s pretty universal
No they do not work on the 10 rounders because they have extra material inside that doesn’t aloud the spring to go in trust me I tried 😉
Orlando Garcia currently struggling with this rn 🙄 I’m glad I found this
Does NOT work on the crappy 10 rndrs
only got +1 smh
This is not how you install those extension. you don’t need the oem spring plate
It’s how I did it and it’s worked probably about 500 rounds
@@maxlahoda that's not the point, and im sure you love to fit more rounds in that magazine don't you ?
Here’s a clue. When you’re doing a demonstration video for people who don’t know how to do it, don’t fast forward through parts you don’t think are important.
Well he didn't even know how to put the lock pin in so I'm thinking he's kind of a hack. Doesn't see a reason to install it... Ok. Tried to put it in and had to stop and not mention to others how it is supposed to be installed. The set screw on the side there.
I was thinking the same thing. And in reading through the comments, several are pointing out that he should not have put the OEM insert into the new extender.
Same one you can buy on wish for 13 bucks. They all come from China anyway.
It's Called A Mag Tool, lol...
Cool
was this a glock 19 gen 5 mag?
Yes
have a question, i bought two magazine extensions and when its fully loaded it have a sound when i shake it, like something loose its normal? Or i install it wrong? Glock 34 3 gen And its has of 70 shots two missfeed
Normal. That sound you make is a bullet that moves in the stack. They all do it. Just the way the bullets stack in the mag.
Yeah that normal
for goodness sake, go test your magazine at the range!
I did as I’ve used it for years now and it works fine?
doesn’t find a need for it. lol u just didn’t know what u we’re doing
It says plus 4 but only adds 1 or 2. Is there something wrong on how i position the spring but i did like how you did. Do i need to cut a spring?
It should get looser Over time. Sometimes you can use the old spring to fit more as well
@@maxlahoda I BARELY GOT 1 EXTRA ROUND WITH GHOST LG +13% SPRING. HELP PLEASE
@@DungNguyen-fj2wp it’s just jammed. Pull apart and redo.
@@chadpreston5549 how can i take it apart again? Spring won't let me
@@monps6183 remove plate?? Squeeze gently on sides AND PULL OR USE A TABLE OR SOMETHING TO SLIDE It’s a pain. But once u understand how it goes on and off. It’s easy.
Song in backround?
Don Omar Burgers blinded by deep chills I believe
Dude, you need to sharpen your knife. Your blade in pathetically dull.
Thanks Sherlock
How have they held up?
RICEY702 really well. Been shooting them every weekend and they’ve had no problems
@@maxlahoda can you post a video when you get the chance
Yeah
Hey Max. What are they made of? Aluminum alloy or more cheap aluminum?
How do you take the mag extension off?
Loosen screw push pin down n push mag off migjt have to put presure above tabs
Same with taren tatical
The same way you put them on but in reverse
In reverse order
@@midnightthinker5479 loosen with what?
Can you put the plus 5 on the 22 mag for the glock 23 ?
Did you ever figure it out ? I’m having trouble with that tiny silver rod that pokes out how do I get it to come out ?
@@ronhoudini4976 mine only fits 2 extra rounds.
Did you figure it out?